K64 电动工具 标准查询与下载

BS EN ISO 28927-4:2010 手持便携式电动工具.振动辐射的评估试验方法.直向砂轮机

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of straight grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test wheel and run under no-load conditions. This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, intended for grinding and surface finishing using straight grinding wheels type 1, tapered wheels type 4 and cylindrical plugs, e.g. of type 16 (cylindrical plug, tapered cone), 18 (cylindrical plug, flat end), 18R (cylindrical plug, rounded end) and 19 (cylindrical plug, taper-roll shaped), for use on all kinds of materials. It is not applicable to grinders used with wire brushes, nor is it applicable to die grinders where the inserted tool is mounted in a collet. NOTE 1 Typical machines covered by this part of ISO 28927 are illustrated in Figures 1 to 3. It is intended that the results be used to compare different models of the same type of machine. NOTE 2 To avoid confusion with the terms “power tool” and “inserted tool”, “machine” is used hereinafter for the former.

Hand-held portable power tools. Test methods for evaluation of vibration emission. Straight grinders

BS EN 60745-2-5:2010 手持式电动工具.安全性.圆盘锯的详细要求

Hand-held motor-operated electric tools. Safety. Particular requirements for circular saws

ISO 28927-11:2011 手持式非电动工具.振动辐射的评估用试验方法.第11部分:石制锤子

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held stone hammers. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a stone hammer when operated in laboratory conditions. It is intended that the results be used to compare different models of the same type of machine. This part of ISO 28927 is applicable to engraving pens and stone hammers intended for use by stone masons (see Clause 5), driven pneumatically or by other means. It is not applicable to demolition hammers or to chipping hammers primarily intended for use on metal or in construction. NOTE To avoid confusion with the terms “power tool” and “inserted tool”, “machine” is used hereinafter for the former.

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers

IEC 60745-2-3:2011 手持式电动工具.安全性.第2-3部分:螺纹磨床,抛光机和盘式磨砂机的详细要求

This clause of Part 1 is applicable@ except as follows: Addition: This standard applies to grinders@ polishers and disk-type sanders@ including angle@ straight and vertical tools@ with a rated capacity not exceeding 230 mm. For grinders@ the rated speed does not exceed a peripheral speed of the accessory of 80 m/s at rated capacity. This standard does not apply to dedicated cut-off machines which are covered by IEC 60745-2-22. This standard does not apply to random-orbit polishers and random-orbit sanders which are covered by IEC 60745-2-4.

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

IEC 60745-2-3/AMD1/COR1:2011 手持式电动工具.安全性.第2-3部分:螺纹磨床,抛光机和盘式磨砂机的详细要求

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

ANSI/UL 60745-2-19-2011 手持式电动工具的安全标准:安全.第2-19部分:接合器特殊要求

1. Proposed Revisions To Align With Amendment No. 1 For IEC 60745-2-19

Standard for Safety for Hand-Held Motor-Operated Electric Tools: Safety - Part 2-19: Particular Requirements for Jointers

ANSI/UL 60745-2-1a-2011 手持式电动机驱动的电动工具的安全标准.安全.第2-1部分:电钻和冲击钻的特殊要求

1. Proposed Revisions To Align The Text Of The UL And IEC Versions Of 60745-2-1

Standard for Safety for Hand-Held Motor-Operated Electric Tools - Safety - Part 2-1: Particular Requirements for Drills and Impact Drills

ANSI/UL 60745-2-13-2011 手持式电动工具的安全标准.安全性.第2-13部分:链锯的特殊要求

1. Proposed Adoption Of The Second Edition Of IEC 60745-2-13, Hand-Held Motor-Operated Electrical Tools - Safety - Part 2-13: Particular Requirements For Chain Saws, As The First Edition Of UL 60745-2-13

Standard for Safety for Hand-Held Motor-Operated Electrical Tools - Safety - Part 2-13: Particular Requirements For Chain Saws

ANSI/UL 60745-2-17-2011 手持式电动工具的安全标准:安全.第2-17部分:缩放刻模机和修剪机的特定要求

1. Adoption of the Third Edition of IEC 60745-2-17, Hand-Held Motor-Operated Electrical Tools - Safety - Part 2-17: Particular Requirements for Routers and Trimmers, as the Third Edition of UL 60745-2-17

Standard for Safety for Hand-Held Motor-Operated Electric Tools: Safety - Part 2-17: Particular Requirements for Routers and Trimmers

DIN EN 60745-2-6:2011 手持式电动工具.安全性.第2-6部分:锤子的特殊要求(IEC 60745-2-6-2003,修订版 + A1-2006 + A2-2008);德文版本EN 60745-2-6-2010

Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers (IEC 60745-2-6:2003, modified + A1:2006 + A2:2008); German version EN 60745-2-6:2010

DIN EN 60745-2-11:2011 手持式电动工具.安全性.第2-11部分:往复式锯(窄条锯,马刀式锯)的特殊要求 (修改的IEC 60745-2-11-2003 + A1-2008);德文版本EN 60745-2-11-2010

Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) (IEC 60745-2-11:2003, modified + A1:2008); German version EN 60745-2-11:2010

DIN EN 60745-2-19:2011 手持式电动工具.安全性.第2-19部分:连接器的特殊要求(IEC 60745-2-19-2005,修订版 + A1-2010));德文版本EN 60745-2-19-2009 + A1-2010

Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers (IEC 60745-2-19:2005, modified + A1:2010); German version EN 60745-2-19:2009 + A1:2010

DIN EN 60745-2-14:2011 手持式电动工具.安全性.第2-14部分:刨床的特殊要求(IEC 60745-2-14-2003 + A1-2006,修订版+ A2-2010);德文版本EN 60745-2-14-2009 + A2-2010

Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers (IEC 60745-2-14:2003 + A1:2006, modified + A2:2010); German version EN 60745-2-14:2009 + A2:2010

DIN EN 60745-2-1:2011 手持式电动工具.安全性.第2-1部分:钻头和冲击钻的特殊要求(IEC 60745-2-1-2003,修订版+ A1-2008);德文版本EN 60745-2-1-2010

Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills (IEC 60745-2-1:2003, modified + A1:2008); German version EN 60745-2-1:2010

DIN EN 60745-2-2:2011 手持式电动工具.安全性.第2-2部分:旋具和冲击式套筒扳手的详细要求(IEC 60745-2-2-2003,修订版本+ A1-2008).德文版本EN 60745-2-2-2010

Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches (IEC 60745-2-2:2003, modified + A1:2008); German version EN 60745-2-2:2010

ANSI/UL 60745-2-14-2011 手持式电动工具的安全性标准.安全性.第2-14部分:刨机的详细要求

1. Proposed Revisions to Align With Amendment No. 2 For IEC 60745-2-14 2. Proposed Editorial Revisions To Delete Annex 14.DVL

Standard for Safety for Hand-Held Motor-Operated Electric Tools: Safety - Part 2-14: Particular Requirements for Planers

ISO 28927-4:2010 手持便携式电动工具.振动辐射的评估用试验方法.第4部分:直式电磨轮

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of straight grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test wheel and run under no-load conditions. This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, intended for grinding and surface finishing using straight grinding wheels type 1, tapered wheels type 4 and cylindrical plugs, e.g. of type 16 (cylindrical plug, tapered cone), 18 (cylindrical plug, flat end), 18R (cylindrical plug, rounded end) and 19 (cylindrical plug, taper-roll shaped), for use on all kinds of materials. It is not applicable to grinders used with wire brushes, nor is it applicable to die grinders where the inserted tool is mounted in a collet. NOTE 1 Typical machines covered by this part of ISO 28927 are illustrated in Figures 1 to 3. It is intended that the results be used to compare different models of the same type of machine. NOTE 2 To avoid confusion with the terms “power tool” and “inserted tool”, “machine” is used hereinafter for the former.

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders

NF C75-745-2-17:2010 手提式电动工具.安全性.第2-17部分:木铣和修边机的专用要求.

Hand-held motor-operated electric tools - Safety - Part 2-17 : particular requirements for routers and trimmers.

NF C75-745-2-5:2010 手持式电动工具.安全性.第2-5部分:圆锯的特殊要求.

Hand-held motor-operated electric tools - Safety - Part 2-5 : particular requirements for circular saws.

BS EN ISO 11148-4:2010 手持式非电动工具.安全性要求.非旋转式冲击电动工具

IMPORTANT — The electronic file of this document contains colours that are considered useful for the correct understanding of the document. Users should consider printing this document using a colour printer. ISO 3864-1 provides colorimetric and photometric properties together with, as a guideline, references from colour order systems. This part of ISO 11148 applies to hand-held non-electric power tools (hereafter referred to as “non-rotary percussive power tools”) intended for chipping, riveting, breaking of concrete and asphalt, ramming, etc. The non-rotary percussive power tool can be powered by compressed air, hydraulic fluid or internal combustion engines and is intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. This part of ISO 11148 covers — breakers; — bush hammers; — chipping hammers; — small chisels; — engraving pens; — needle scalers; — pick hammers; — pile drivers; — portable pile drivers; — punches; — rammers; — riveting hammers; — scaling hammers; — stone hammers; — spades; — tampers. This part of ISO 11148 does not cover special requirements and modifications on non-rotary percussive power tools for the purpose of mounting in a fixture. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events when the tools are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of non-rotary percussive power tools in potentially explosive atmospheres.

Hand-held non-electric power tools. Safety requirements. Non-rotary percussive power tools