K64 电动工具 标准查询与下载

IEC 60745-2-3:2006/AMD1:2010 修改件1.手持式电动工具.安全性.第2-3部分:螺纹磨床,抛光机和盘式磨砂机的详细要求

Replace the existing text of this clause by the following: This clause of Part 1 is applicable, except as follows: Addition: This standard applies to grinders, polishers and disk-type sanders, including angle, straight and vertical tools, with a rated capacity not exceeding 230 mm. For grinders, the rated speed does not exceed a peripheral speed of the accessory of 80 m/s at rated capacity. This standard does not apply to dedicated cut-off machines which are covered by IEC 60745-2-22. This standard does not apply to random-orbit polishers and random-orbit sanders which are covered by IEC 60745-2-4.

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

BS EN ISO 11148-3:2010 手持式电动工具.安全性要求.钻头和攻丝机

This part of ISO 11148 applies to hand-held non-electric power tools (hereafter referred to as “drills and tappers”) intended for rotary drilling of holes in all kinds of material, e.g. wood, metal, concrete, plastics, etc., or for tapping and cleaning threads in metal and plastics. The drills and tappers can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. This part of ISO 11148 is applicable to ? drills; ? heavy duty drills with two handles; ? tappers. This part of ISO 11148 is not applicable to special requirements and modifications of drills and tappers for the purpose of mounting them in fixtures. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events when drills and tappers are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer, with the exception of their use in potentially explosive atmospheres.

Hand-held non-electric power tools. Safety requirements. Drills and tappers

BS EN ISO 11148-6:2010 手持式非电动工具 安全性要求 螺纹紧固件装配电动工具

This part of ISO 11148 applies to hand-held non-electric power tools (hereafter referred to as “assembly power tools for threaded fasteners”) intended for tightening or installing of threaded fasteners. The assembly power tools for threaded fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. This part of ISO 11148 covers ? air-hydraulic impulse wrenches; ? impact wrenches; ? fastener installation tools; ? nutrunners; ? open-ended spanners (crow-foot with open-ended socket or tube nut wrench); ? ratchet wrenches; ? screwdrivers. This part of ISO 11148 does not cover special requirements and modifications of assembly power tools for threaded fasteners for the purpose of mounting them in fixtures. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events when the tools are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of assembly power tools for threaded fasteners in potentially explosive atmospheres.

Hand-held non-electric power tools. Safety requirements. Assembly power tools for threaded fasteners

UL 60745-2-1 (ND)-2004 UL60745-2-1手持式电动工具.安全性.第2-1部分:钻孔机和冲击钻孔机的详细要求

The revisions dated October 6, 2010 were issued to incorporate revisions to align UL 60745-2-1, Second Edition with IEC 60745-2-1, Edition No. 2.1, issued July, 2008. IEC 60745-2-1 incorporates the IEC Amendment No. 1 dated May, 2008. Please note that the national difference document incorporates all of the U.S. national differences for UL 60745-2-1 up to the date of this revision. The changes to the national differences are itemized below. 1. Clauses 8.12.1DV, 17.2DV, and 23.2DV have been deleted from the previous version of the standard. The text of the national differences have been incorporated into this version of the standard. 2. Clauses K.12.2DV and K.12.3DV have been added to the standard. 3. Annex 1.DVL has been updated to reflect the changes in Items (1) and (2).

National Differences For UL 60745-2-1 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-1: Particular Requirements for Drills and Impact Drills (Second Edition; Reprint with Revisions Through and Including October 26, 2011)

BS EN 61029-2-10:2010 便携式电动工具的安全性.第2-10部分:切割螺纹磨床的详细要求

This clause of part 1 is applicable, except as follows: 1.1 Addition: This European Standard applies to cutting-off grinders intended to cut metal by means of a rotating abrasive cutting-off wheel: - with an abrasive cutting-off wheel diameter not exceeding 406 mm; - with a peripheral speed not exceeding 80 m/s.

Safety of transportable motor-operated electric tools. Part 2-10: Particular requirements for cutting-off grinders

BS EN 61029-2-10:2010+A11:2013 便携式电动工具的安全性.切割螺纹磨床的详细要求

Safety of transportable motor-operated electric tools. Particular requirements for cutting-off grinders

IEC 60745-2-14:2010 手持式电动工具.安全性.第2-14部分:刨床的详细要求

This clause of Part 1 is applicable except as follows: Addition: This standard applies to planers.

Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers

DIN EN 61029-2-10:2010 便携式电动工具的安全性.第2-10部分:切割螺纹磨床的详细要求(IEC 61029-2-10-1998,修改件).德文版本EN 61029-2-10-2010

Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders (IEC 61029-2-10:1998, modified); German version EN 61029-2-10:2010

DIN EN 60745-2-15:2010 手持式电动工具.安全性.第2-15部分:绿篱修剪器的详细要求(IEC 60745-2-15-2006,修改件+A1-2009).德文版本EN 60745-2-15-2009+ A1-2010

Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers (IEC 60745-2-15:2006, modified + A1:2009); German version EN 60745-2-15:2009 + A1:2010

BS EN 60745-2-11:2010 手持式电动工具.安全性.往复锯(曲线锯和刀锯)的详细要求

This clause of Part 1 is applicable, except as follows: Addition: This standard applies to reciprocating saws such as jig saws and sabre saws.

Hand-held motor-operated electric tools. Safety. Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)

BS EN 61029-2-6:2010 便携式电动工具安全性.第2-6部分:带给水的金刚石钻头详细要求

This clause of part 1 is applicable except as follows: 1.1 Addition: This standard applies to transportable diamond drills manually fed, intended to be connected to a water supply (water supply may include water source from a pipe or tank or vat).

Safety of transportable motor-operated electric tools. Part 2-6: Particular requirements for diamond drills with water supply

IEC 60745-2-19:2010 手持式电动工具.安全.第2-19部分:开槽机的特殊要求

This clause of Part 1 is applicable, except as follows:This standard applies to jointers for cutting into wood or similar material.

Hand-held motor-operated electric tools – Safety – Part 2-19: Particular requirements for jointers (Edition 1.1 Consolidated Reprint)

NF C75-745-2-14/A2:2010 手持式电动工具.安全性.第2-14部分:刨床的详细要求

Hand-held motor-operated electric tools - Safety - Part 2-14 : particular requirements for planers.

NF C75-206:2010 移动式电动工具的安全.第2-6部分:注水金刚石钻的特殊要求.

Safety of transportable motor-operated electric tools - Part 2-6 : particular requirements for diamond drills with water supply.

NF C75-745-2-2:2010 手持式电动工具.安全性.第2-2部分:螺丝刀和冲击式套筒扳手的详细要求

Hand-held motor-operated electric tools - Safety - Part 2-2 : particular requirements for screwdrivers and impact wrenches.

NF C75-745-2-1:2010 手持式电动工具.安全性.第2-1部分:电钻和冲击钻的详细要求

Hand-held motor-operated electric tools - Safety - Part 2-1 : particular requirements for drills and impact drills.

NF C75-745-2-11:2010 手持式电动工具.安全性.第2-11部分:往复式电动锯(电动手锯和夹具)的详细要求

Hand-held motor-operated electric tools - Safety - Part 2-11 : particular requirements for reciprocating saws (jig and sabre saws).

IEC 60745-2-5:2010 手持式电动工具.安全性.第2-5部分:圆盘锯的详细要求

This clause of Part 1 is applicable, except as follows: Addition: This standard applies to circular saws, which hereinafter will be referred to as saws. This standard does not apply to saws designed for use with abrasive wheels.

Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws

DIN EN 60745-2-18:2010 手持式电动工具.安全性.第2-18部分:打包工具的详细要求(IEC 60745-2-18-2003+ 修改件A1-2008).德文版本EN 60745-2-18-2009

Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools (IEC 60745-2-18:2003, modified + A1:2008); German version EN 60745-2-18:2009

DIN EN 60745-2-9:2010 手持式电动工具.安全性.第2-9部分:攻丝机的详细要求(IEC 60745-2-9-2003修订本+A1-2008).德文版本EN 60745-2-9-2009

Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers (IEC 60745-2-9:2003, modified + A1:2008); German version EN 60745-2-9:2009