K64 电动工具 标准查询与下载

BS EN 60745-2-14:2009+A2:2010 手持式电动工具.安全性.电刨的详细要求

This clause of Part 1 is applicable except as follows: Addition: This standard applies to planers.

Hand-held motor-operated electric tools - Safety - Particular requirements for planers

BS EN 60745-2-8:2009 手持式电动工具.安全性.剪切机和步冲轮廓机的特殊要求

This clause of Part 1 is applicable except as follows: Addition: This standard applies to shears and nibblers.

Hand-held motor-operated electric tools - Safety - Particular requirements for shears and nibblers

BS EN 61029-2-11:2009 便携式电动工具的安全性.组合横切锯和台锯的特殊要求

This clause of Part 1 is applicable except as follows: 1.1 Addition: This European Standard applies to transportable combined mitre and bench saws with a saw blade diameter not exceeding 315 mm and intended for cutting wood and analogous materials. 1.2 Addition: This European Standard does not apply to transportable mitre and bench saws intended to be used to cut steel, iron, brass or food. This standard does not apply to – single function bench saws; – single function mitre saws; – combined mitre and bench saws other than transportable.

Safety of transportable motor-operated electric tools - Particular requirements for combined mitre and bench saws

BS EN 60745-2-20:2009 手持式电动工具.安全性.带锯的特殊要求

This clause of Part 1 is applicable, except as follows: Addition: This standard applies to band saws.

Hand-held motor-operated electric tools - Safety - Particular requirements for band saws

BS EN 60745-2-18:2009 手持式电动工具.安全性.打包工具的详细要求

This clause of Part 1 is applicable, except as follows: Addition: This standard applies to strapping tools.

Hand-held motor-operated electric tools - Safety - Particular requirements for strapping tools

BS EN 60745-2-9:2009 手持式电动工具.安全性.攻丝机的特殊要求

This clause of Part 1 is applicable except as follows: Addition: This standard applies to tappers.

Hand-held motor-operated electric tools - Safety - Particular requirements for tappers

BS EN 60745-2-13:2009+A1:2011 手持电动工具的安全性.安全性.链锯的特定要求

This clause of Part 1 is applicable, except as follows: Addition: This standard applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine. This standard does not apply to chain saws for tree service as defined in ISO 11681-2, pole cutters and pruners. The chain saws covered by this standard are designed only to be operated with the right hand on the rear handle and the left hand on the front handle.

Hand-held motor-operated electric tools. Safety. Particular requirements for chain saws

BS EN 61029-1:2009+A11:2010 便携式电机驱动工具的安全性.一般要求

1.1 This standard consists of Part 1 and Part 2 and applies to electric motor-operated or magnetically-driven tools, intended for indoor and for outdoor use, which have all the following characteristics: a) easily moved by one person, simple devices to facilitate transportation may be incorporated, e.g. handles, wheels and the like; b) used in a safe stationary position with or without fixing, e.g. fast clamping devices, bolting and the like; c) used under the control of an operator; d) not intended for continuous production or production line use; e) intended to be connected to electric supply by a flexible cord and a plug; f) maximum rated voltage not exceeding 250 V single-phase, a.c. or d.c., or 440 V three-phase, a.c.; g) maximum rated input not exceeding 2500 W, for single-phase a.c. or d.c., and 4000 W for three-phase a.c. These tools are commonly known as "transportable motor-operated electric tools", hereinafter referred to, in the text, as tools. Examples of these tools are: Circular saws, band saws, planers, thicknessers, radial arm saws, spindle moulders, fret saws, jig saws, mitre/chop saws, wood lathes, belt sanders, disc sanders, thicknessers-planers, chain mortisers, multipurpose machines, combing machines, metal lathes, bench grinders, bench drilling machines, pipe threaders, pipe benders, pipe saws, key cutting machines, sharpening machines, sheet metal shears, concrete drills, concrete saws, wood shredders, pipe cleaners. This European Standard applies also to transportable motor operated tools intended to be connected to a water supply such as mains, tank or vat. 1.2 This standard does not apply to - electric motor-operated household and similar electrical appliances according to EN 60335-1; - hand-held electric motor-operated tools according to EN 50144-1 or EN 60745-1; - small low voltage transformer operated bench tools intended for model making; - machines for preparing or processing food; - tools intended to be used in the presence of explosive atmosphere (dust, vapour or gas); - tools intended to be used with cosmetics or pharmaceutical products; - auxiliary equipment such as external cooling and dust extraction/collection systems.

Safety of transportable motor-operated electric tools. General requirements

BS EN 60745-2-21:2009+A1:2010 手持式电动工具.安全性.排水沟清理机的特定要求

This clause of Part 1 is applicable, except as follows: Addition: This standard applies to drain cleaner.

Hand-held motor-operated electric tools. Safety. Particular requirements for drain cleaners

BS EN 60745-1:2009+A11:2010 手持式电动工具.安全性.一般要求

Hand-held motor-operated electric tools. Safety. General requirements

BS EN 60745-2-15:2009+A1:2010 手持式电动工具.安全性.树墙修剪机的详细要求

This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to hedge trimmers which are designed for use by one operator for trimming hedges and bushes, utilizing one or more linear reciprocating cutter blades. This standard is not applicable to hedge trimmers with a rotating blade.

Hand-held motor-operated electric tools - Safety - Particular requirements for hedge trimmers

BS EN 60745-2-19:2009+A1:2010 手持式电动工具.安全性.第2-19部分:连接件的详细要求

This clause of Part 1 is applicable, except as follows: Addition: This standard applies to jointers for cutting into wood or similar material.

Hand-held motor-operated electric tools. Safety. Part 2-19: Particular requirements for jointers

BS EN ISO 28927-8:2009 手持便携式电动工具.振动辐射的评估用试验方法.第8部分:往复式锯、抛光和锉床以及摆动或旋转式小锯

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine run under specified test conditions. It is intended that the results be used to compare different models of the same type of machine. This part of ISO 28927 is applicable to reciprocating files intended for surface finishing equipped with a file or polishing tool, saws intended for parting sheets, plaster for medical use or wood, or equipped with a saw blade for use on all kinds of materials, and small circular saws primarily intended for cutting metal or composite materials (see Clause 5), whether driven pneumatically or by other means. It is not applicable to files that are normally used with one hand on the file blade, nor to large circular saws intended for cutting wood.

Hand-held portable power tools - Test methods for evaluation of vibration emission - Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action

BS EN ISO 28927-1:2009 手持便携式电动工具.振动辐射的评估用试验方法.角式和立式研磨机

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power-driven angle and vertical grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test wheel and run under no-load conditions. The method has been established for surface grinding tasks only. Cutting and sanding generally create lower vibrations. It is intended that the results be used to compare different models of the same type of machine. This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, intended for grinding, cutting-off and rough sanding, with bonded, coated and super-abrasive products for use on all kinds of materials. It is not applicable to grinders used with wire brushes, nor is it applicable to die or straight grinders.

Hand-held portable power tools - Test methods for evaluation of vibration emission - Angle and vertical grinders

BS EN 60745-2-13:2009 手持式电动工具.安全性.链锯的特殊要求

This standard applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine. This standard does not apply to chain saws for tree service as defined in ISO 11681-2, pole cutters and pruners.

Hand-held motor-operated electric tools - Safety - Particular requirements for chain saws

BS EN ISO 28927-2:2009 手持便携式电动工具.振动辐射的评估用试验方法.扳手、螺母机和螺丝刀

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power-driven wrenches, nutrunners and screwdrivers used for tightening and loosening threaded fasteners. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine when operating at a specified load. The method has been tested for fastening tasks only. It is intended that the results be used to compare different models of the same type of machine. This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, with impact or impulse action, of shut-off, ratchet or stall type, and of all designs — straight, pistol-grip, angle or bow handle. It covers machines with 6,3 mm to 40 mm (1/4 in to 11/2 in) male or female drive output shafts, as well as other geometries. It is not applicable to nutrunners designed to be used only in torque reaction arms.

Hand-held portable power tools - Test methods for evaluation of vibration emission - Wrenches, nutrunners and screwdrivers

BS EN 60745-2-12:2009 手持式电动工具.安全性.混凝土振捣器的特殊要求

This standard applies to concrete vibrators.

Hand-held motor-operated electric tools - Safety - Particular requirements for concrete vibrators

BS EN ISO 28927-3:2009 手持便携式电动工具.振动辐射的评估用试验方法.抛光机与旋转、轨道和随机轨道砂磨机

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven, portable polishers and rotary, orbital and random orbital sanders used for surface-finishing processes, not for material removal. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine when operating under type-test conditions. It is intended that the results be used to compare different models of the same type of machine. This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means. It is not applicable to straight grinders equipped with a sanding wheel or to belt sanders.

Hand-held portable power tools - Test methods for evaluation of vibration emission - Polishers and rotary, orbital and random orbital sanders

BS EN ISO 28927-9:2009 手持便携式电动工具.振动辐射的评估用试验方法.缩放锤和针束除锈机

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven scaling hammers and needle scalers. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine run under specified test conditions. It is intended that the results be used to compare different models of the same type of machine. This part of ISO 28927 is applicable to engraving pens, scabblers, scaling hammers and needle scalers (see Clause 5), driven pneumatically or by other means, intended for paint, rust or scale removal with reciprocating work tools or needles and for all kinds of materials.

Hand-held portable power tools - Test methods for evaluation of vibration emission - Scaling hammers and needle scalers

BS EN ISO 28927-6:2009 手持便携电动工具.振动辐射的评价用试验方法.撞锤

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven rammers. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine run under specified test conditions. It is intended that the results be used to compare different models of the same type of machine. This part of ISO 28927 is applicable to rammers, back-fill rammers, pawing rammers, sand rammers and stampers (see Clause 5), driven pneumatically or by other means, intended for use in foundries, on building sites, etc., and with, for example, butts or peens made of cast iron or rubber, used for ramming of casting sand or in stamping work.

Hand-held portable power tools - Test methods for evaluation of vibration emission - Rammers