K70 电气照明综合 标准查询与下载

ISO 8995:2002/cor 1:2005 室内工作场所的照明.技术勘误1

This standard is about Lighting of indoor work places TECHNICAL CORRIGENDUM1

Lighting of indoor work places; Technical Corrigendum 1

KS C 8104-2005 高压水银灯镇流器

이 규격은 KS C 7604, KS C IEC 60188 및 KS C IEC 62035에서

Ballasts for high pressure mercury vapour lamps

KS C 7522-2005 氖光灯

이 규격은 표시용으로 사용하는 네온 램프(이하 램프라 한다.)에 대하여 규정한다.

Neon glow lamps

JIS C 8105-1:2005 灯具.第1部分:安全的一般要求

この規格は，照明器具の分類，表示並びに機械的及び電気的構う告に関する一般的要求事項について規定する。

Luminaires -- Part 1: General requirements for safety

NF X90-008-1*NF EN 14255-1:2005 非相干光辐射下个人辐照量的测量和评估.第1部分:工作地点内人工光源发出的紫外线辐射

Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: ultraviolet radiation emitted by artificial sources in the workplace.

DLA A-A-55561 B-2005 表面安装双列直插式组件包埋式熔线片一般要求

This CID covers the general requirements for DIP or SM inclused link fuses. Requirements.for specific fuses are covered in the individual CID sheets. Fuses covered by this CID are intended for commercial/industrial applications.

FUSE, INCLUSED LINK, DUAL-INLINE PACKAGE (DIP), OR SURFACE MOUNT (SM), GENERAL REQUIREMENTS FOR.

CSA C22.2 No.256-05-2005 直接插入式夜间照明灯具.第1版

This Standard applies to direct plug-in nightlights not exceeding 10 W input, for indoor use only, in non-hazardous locations and intended to be used in accordance with the Canadian Electrical Code, Part I, CSA C22.1, and the National Electrical Code, A

Direct Plug-in Nightlights First Edition

ANSI/IESNA RP-16-2005 照明工程的命名和定义

The standard reflects advances in lighting technology and new lighting terminology and updates terms and definitions for illuminating engineering.

Nomenclature and Definitions for Illuminating Engineering

KS C 6900-2004 光电传输用手动元器件通则

이 규격은 석영계 광섬유를 이용한 광전송에 사용하는 광 수동 부품의 통칙으로, 광 전송용

General rules of passive devices for fiber optic transmission

BS EN 60399:2004 带灯罩卡环的灯座的圆筒螺纹

Barrel thread for lampholders with shade holder ring LIMIT DIMENSIONS OF THREAD FOR METAL OR PLASTIC LAMPHOLDERS WITH SHADE HOLDER RINGS MADE OF METAL OR PLASTIC LIMIT DIMENSIONS OF THREAD FOR CERAMIC LAMPHOLDERS WITH SHADE HOLDER RINGS MADE OF METAL OR PLASTIC "Go" and "Not Go" gauges for shade holder rings PURPOSE "Go" gauge: Control of the minimum dimensions of the screw threads of a shade holder ring. "Not Go" gauge: Control of the maximum minor diameter D1 of the female screw thread. TESTING "Go gauge: It shall be possible to screw it completely in without undue force. "Not Go" gauge: It shall not be possible to insert it by its own weight until surface T. MATERIAL: Steel. Parts exposed to wear shall be hardened.

Barrel thread for lampholders with shade holder ring

IEC 60061-3:1969/AMD34:2004 灯头、灯座及检验其安全性和互换性的量规.第3部分:量规.修改件34

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges; Amendment 34

SANS 10389-3:2004 室外照明.第3部分:来自室外照明设施的干扰光影响限制指南

This Guide sets out guidelines for assessing the environmental impacts of outdoor lighting and gives recommended limits for relevant lighting parameters to contain the obtrusive effects of outdoor lighting within tolerable levels. As the obtrusive effects of outdoor lighting are best controlled initially by appropriate design, the guidance given is primarily applicable to new installations; however, some advice is also provided on remedial measures which may be taken for existing installations.

Exterior lighting Part 3: Guide on the limitation of the effects of obtrusive light from outdoor lighting installations

KS C 8102-2004 管形荧光灯用磁镇流器

이 규격은 KS C 7601, KS C IEC 60081, KS C IEC 60901에서

Magnetic ballasts for fluorescent lamps

BS PD CEN/TR 13201-1:2004 道路照明.第1部分:照明级别的选择

This document specifies the lighting classes set out in EN 13201-2 and gives guidelines on the application of these classes. To do this, it includes a system to define an outdoor public traffic area in terms of parameters relevant to lighting. To assist in the application of classes, it suggests a practical relationship between the various series of lighting classes, in terms of comparable or alternative classes. It also gives guidelines on the selection of the relevant area to which the lighting classes from EN 13201-2 and the calculation grids and procedure from EN 13201-3 should be applied. The parameters used in this document allow: a) a lighting situation to be described in terms of: ? the geometry of the area under consideration; ? the use of the area; ? the influence of the surrounding environment; b) a specific approach to situations to be taken to enable the effective use of energy. This document does not give the criteria on which a decision to light an area can be made, nor on how a lighting installation should be used. This document does not give guidelines on the selection of lighting classes for toll stations, tunnels or canals and locks.

Road lighting - Part 1: Selection of lighting classes

KS C 7601-2004 荧光灯(普通照明用)

이 규격은 교류 회로에서 점등되는 일반 조명용 직관형, 둥근형 형광 램프 및 콤팩트형 형광

Fluorescent lamps for general lighting service

SAE J572-2004 建筑物及工业机器用密封的照明设备的要求

This SAE Standard applies to 145 mm nominal headlamp and floodlamp units.To define the dimensional requirements for sealed lighting units and assure their interchangeability.

Requirements for Sealed Lighting Unit for Construction and Industrial Machines

CIE 159-2004 色彩管理系统用彩色外观模型:CIECAM02(C)

Colour appearance models (Fairchild, 1998) are a large area of research in the field of colour science. There is a need however for a single colour appearance model for colour management systems. This model should balance complexity and functionality. One of the strengths of CIECAM97s is that it has provided a common benchmark for researchers to compare results and focus recommendations for improvements and refinements. This document provides only a colour appearance model for colour management systems. It does not provide guidance for gamut mapping (Morovic et al., 2001), colour preference (Holm, 1996) or other topics (Pearson, 1986) related to colour management. Background information is provided with respect to basic terminology and evolution of the model but it is assumed that the reader is familiar with the basics of colour science (Hunt, 1998; Berns, 2000) and colour management. For additional information regarding the complexities of gamut mapping and colour encoding, interested readers should refer to CIE, 2004 and CIE technical committee 8-05, Communication of colour information. There are a number of possible applications for this model and it is informative to provide a partial list of potential uses. Gamut visualisation is a critical aspect of evaluating the colour capabilities of a given device or process. CIECAM02 can be useful for comparison of device gamuts based on a set of perceptual attribute correlates. It is also possible to use CIECAM02 as the colour space for gamut mapping. Use of CIECAM02 does not define the domain or range of the mapping or the specifics of the mapping but again it provides perceptual attribute correlates for gamut mapping. As with CIELAB (CIE, 1986), it is also possible to use CIECAM02 for interpolation, quantization, compression and other applications. However, use of CIECAM02 for these applications will require a full understanding of the processing requirements, such as processing speed, memory requirements, and so on. CIECAM02 has been shown to have superior blue hue constancy relative to CIELAB and CIELUV (CIE, 1986).

A COLOUR APPEARANCE MODEL FOR COLOUR MANAGEMENT SYSTEMS: CIECAM02 (C) [Superseded: CIE 131]

CSA C22.2 No.250.0-04-2004 《灯具》 第2版

Luminaires Second Edition

Luminaires second edition

UL 924 BULLETINS-2004 应急照明和电源设备

Covers emergency lighting and power equipment for use in unclassified locations and intended for connection to branch circuits of 600 volts or less. Such equipment is intended to supply automatically illumination or power or both to critical areas and equipment in the event of failure of the normal supply, in accordance with the National Electrical Code, the Life Safety Code, and the International Building Code. Examples include exit signs, emergency luminaires, unit equipment, central station battery banks, and automatic load control relays. Also covers auxiliary lighting and power equipment for use in unclassified locations.

Emergency Lighting and Power Equipment

KS C IEC 61549:2003 杂类灯

이 규격은 다른 규격에서 다루지 않는 램프류에 적용한다.

Miscellaneous lamps