共找到 1063 条与 电光源产品 相关的标准,共 71 页
Applies to safety and interchangeability requirements of tungsten filament incandescent lamps for general lighting service. Covers those tungsten filament incandescent lamps having rated wattage up to and including 200 W, rated voltage of 50 V to 250 V i
Incandescent lamps - Safety specifications Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
This standard describes a system for classification of beam patterns and beam angles of reflector lamps.
Electric Lamps – Classification of the Beam Patterns of Reflector Lamps
The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil
LAMP, INCANDESCENT, R-30 MEDIUM SCREW
MS15535K is inactive for new design and is no longer used, except for replacement purposes.
LAMPS, INCANDESCENT, SEALED BEAM, PAR-56, SCREW TERMINAL BASE
MS15534A is inactive for new design and is no longer used, except for replacement purposes.
LAMP, INCANDESCENT, T-7, CANDELABRA SCREW
이 규격은 다음의 적용을 위해 사용된, 250 V까지의 정격 전압을 갖는 단일 캡과 이중
Incandescent lamps-Safety specifications-Part 3:Tungsten halogen lamps(non-vehicle)
이 규격은 백열전구의 최대 외형 치수(텅스텐-할로겐 램프를 포함)를 다루고 있다.
Maximum lamp outlines for incandescent lamps
This is Amendment 1 to IEC 60081-2005 (Double-capped fluorescent lamps -Performance specifications)
Double-capped fluorescent lamps - Performance specifications; Amendment 3
Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV - Part 2: Requirements for earth-leakage and open-circuit protective devices; German version EN 50107-2:2005
Incandescent lamps - Safety specifications - Part 3 : tungsten-halogen lamps (non-vehicle).
この規格は,定格電圧250V以下の次の用途のハロゲン電球(以下,電球という。)の性能について規定する。ただし,自動車用,航空機用及びそれに類する用途の電球は,この規格の適用範囲外とする。
Tungsten halogen lamps (non-vehicle) -- Performance specifications
This document specifies the required data for lamps and luminaires for the verification of conformity to the requirements of EN 12464-1 and prEN 12464-2. It also specifies data that are commonly used for lighting of indoor and outdoor work places. When these data are provided, they should conform to this document.
Light and lighting — Measurement and presentation of photometric data of lamps and luminaires — Part 2: Presentation of data for indoor and outdoor work places
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Presentation of data for indoor and outdoor work places
この規格は,蛍光灯器具のエネルギー消費効率指数の算出方法について規定する。
Method of calculation on Fluorescent luminaire efficacy index
この規格は,定格電圧250V以下の次の用途に使用するハロゲン電球の安全性及び互換性について規定する。
Incandescent lamps -- Safety specifications -- Part 3: Tungsten halogen lamps (non-vehicle)
The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil
SUPPLEMENTAL SOLAR LIGHTING SYSTEM (NON-ELECTRIC); WITH ACTIVE SUN TRACKING COLLECTORS AND REFLECTIVE LIGHT WAVEGUIDES
The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at www.dodssp.dla.mil
LIGHT, CHEMILUMINESCENT, 4 IN - 6 HR - B, C
The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at www.dodssp.dla.mil
LIGHT, CHEMILUMINESCENT, 15 IN - 8 HR - A, G
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号