K71 电光源产品 标准查询与下载

ANSI C78.260-2002 钨卤素管灯.物理性能

ANSI C78.260-This standard covers the dimensional limits and other physical characteristics required to assure the interchangeability and proper application of tubular tungsten-halogen lamps.

Tubular Tungsten-Halogen Lamps, Physical Characteristics

ANSI C79.1-2002 玻璃灯泡名词术语.电灯玻璃灯泡

ANSI C79.1-This standard concerns Nomenclature for Glass Bulbs-Intended for Use with Electric Lamps

Nomenclature for Glass Bulbs – Intended for Use with Electric Lamps

ANSI C78.1435-2002 投射灯.带G5.3基座的卤钨灯

ANSI C78.1435-This standard concerns Projection-Lamps-Tungsten-Halogen Lamps with G5.3 Bases

Projection Lamps - Tungsten-Halogen Lamps with G5.3 Bases

SN/T 0995-2001 出口节日装饰灯泡检验规程

Rules for the inspection of festival decorative lamp for export

BS EN 60188:2001 高压汞蒸气灯.性能规范

High-pressure mercury vapour lamps - Performance specifications

ANSI C78.1387-2001 电灯.250瓦特M80双端金属卤素灯

Contains information on 250-watt, M80 Double-Ended Metal Hailde Lamps.

Electric Lamps - 250-Watt, M80 Double-Ended Metal Hailde Lamps

SANS 60188:2001 高压汞灯．性能规范

Specifies the performance requirements for high-pressure mercury vapour lamps for general lighting purposes, with or without a red correcting fluorescent coating.

High-pressure mercury vapour lamps - Performance specifications

IEC 60901:2001 单头荧光灯.性能规范

This International Standard specifies the performance requirements for single-capped fluorescent lamps for general lighting service. The requirements of this standard relate only to type testing. Conditions of compliance, including methods of statistical assessment, are under consideration. The following lamp types and modes of operation with external ballasts are included: a) lamps operated with an internal means of starting, having preheated cathodes, for operation on a.c. mains frequencies; b) lamps operated with an external means of starting, having preheated cathodes, for operation on a.c. mains frequencies with the use of a starter, and additionally operating on high frequency; c) lamps operated with an external means of starting, having preheated cathodes, for operation on a.c. mains frequencies without the use of a starter (starterless), and additionally operating on high frequency; d) lamps operated with an external means of starting, having preheated cathodes, for operation on high frequency; e) lamps operated with an external means of starting, having non-preheated cathodes, for operation on high frequency.

Single-capped fluorescent lamps - Performance specifications

DLA MS18238 REV C VALID NOTICE 1-2001 (平扫型)玻璃白炽灯插座的熔线灯

MS18238C, dated 13 January 1976, has been reviewed and determined to be valid for use in acquistion.

LAMP, CARTRIDGE, SHORT CYLINDRICAL, PLUG-IN, INCANDESCENT, GLASS (FLAT TYPE)

DLA MS24513 REV E VALID NOTICE 1-2001 GG-12B1灯泡单触点卡口转位白炽灯座

MS24513E, dated 30 June 1971, has been reviewed and determined to be valid for use in acquistion.

LAMP, INCANDESCENT, SINGLE CONTACT BAYONET INDEXING CANDELABRA, GG-12B1 BULB

DLA MS18235 REV C VALID NOTICE 1-2001 (平扫透镜型)塑料白炽灯插座的熔线灯

MS18235C, dated 13 January 1976, has been reviewed and determined to be valid for use in acquistion.

LAMP, CARTRIDGE, SHORT CYLINSRICAL, PLUG-IN, INCANDESCENT, PLASTIC (FLAT LENS TYPE)

QB/T 2516-2001 镝灯

本标准规定了镝灯系列产品的分类命名、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于功率不大于350OW，带透明玻壳的铺灯。灯根据不同规格由220V或380V,频率为50Hz的交流电网供电，配以相应的镇流器能在电源电压波动不超过+6% -8%的范围内正常启动和燃点。

Dysprosium lamps

IEC 60188:2001 高压汞灯 性能规范

This standard specifies the performance requirements for high-pressure mercury vapour lamps for general lighting purposes, with or without a red correcting fluorescent coating. For some of the requirements given in this standard, reference is made to "the relevant lamp data sheet". For some lamps these data sheets are contained in this standard. For other lamps, falling under the scope of this standard, the relevant data are supplied by the lamp manufacturer or responsible vendor. The requirements of this standard relate only to type testing. NOTE The requirements and tolerances permitted by this standard correspond to testing of a type test sample submitted by the manufacturer for that purpose. In principle this type test sample should consist of units having characteristics typical of the manufacturer's production and being as close to the production centre point values as possible. It may be expected with the tolerances given in the standard that products manufactured in accordance with the type test sample will comply with the standard for the majority of production. Due to the production spread however, it is inevitable that there will sometimes be products outside the specified tolerances. For guidance on sampling plans and procedures for inspection by attributes, see IEC 60410.

High pressure mercury vapour lamps - Performance specifications

IEC 60192:2001 低压纳灯 性能规范

This standard specifies the performance requirements for low-pressure sodium vapour lamps for general lighting purposes. For some of the requirements given in this standard, reference is made to "the relevant lamp data sheet". For some lamps these data sheets are contained in this standard. For other lamps, falling under the scope of this standard, the relevant data are supplied by the lamp manufacturer or responsible vendor. The requirements of this standard relate only to type testing. NOTE The requirements and tolerances permitted by this standard correspond to testing of a type test sample submitted by the manufacturer for that purpose. In principle this type test sample should consist of units having characteristics typical of the manufacturer's production and being as close to the production centre point values as possible. It may be expected with the tolerances given in the standard that products manufactured in accordance with the type test sample will comply with the standard for the majority of production. Due to the production spread however, it is inevitable that there will sometimes be products outside the specified tolerances. For guidance on sampling plans and procedures for inspection by attributes, see IEC 60410.

Low pressure sodium vapour lamps - Performance specifications

IEC 60630:2001 白炽灯用最大灯轮廓

Maximum lamp outlines for incandescent lamps

NF C72-221:2001 放电灯(荧光灯除外).安全规范

Discharge lamps (excluding fluorescent lamps) - Safety specifications.

NF C72-215/A2*NF EN 60901/A2:2001 单头荧光灯.性能规范

Single-capped fluorescent lamps - Performance spécifications.

NF C72-222:2001 单头荧光灯.安全规范

Single-capped fluorescent lamps - Safety specifications.

IEC 60357:2001 卤钨灯

Tungsten halogen lamps (non vehicle)

SANS 60598-2-23:2001 灯具．第2．23部分：特殊要求．白炽灯用超低压照明系统

Specifies requirements for extra low voltage lighting systems for filament lamps intended for ordinary interior use on supply voltages not exceeding 1 000 V. The luminaires, being connected in parallel, are suppplied via freely suspended continuous suppo

Luminaires Part 2-23: Particular requirements - Extra low voltage lighting systems for filament lamps