共找到 737 条与 一般灯具 相关的标准,共 50 页
Luminaires - Part 2: Particular requirements; section 7: Portable luminaires for garden use; German version EN 60598-2-7/A13:1997
Luminaires. General requirements and tests
For use with tungsten filament and tubular fluorescent lamps on supply voltages not exceeding 250 V. To be read in conjunction with BS EN 60598-1:1997
Luminaires - Particular requirements - Handlamps
This International Standard applies to tungsten filament incandescent lamps for general lighting service (GLS) which comply with the safety requirements in IEC 60432-1 and having: — rated wattage of 25 W to 200 W, inclusive; — rated voltage 100 V to 250 V, including marked voltage range not exceeding ±2,5 % of the mean voltage1); — bulbs of the A or PS shapes; — bulbs with clear, frosted or equivalently coated finishes, or white finishes; — caps B22d or E27. Specific lamp types are covered in Section 8. This standard states the performance requirements for lamps, including test methods and means of confirming compliance with the requirements. Whole production appraisal methods regarding a lamp manufacturer’s test record on finished products are defined. This method can be applied for certification purposes. Details of a batch test procedure, which can be used to make an assessment of specific batches, are included, but it is not suitable for certification purposes. #For some of the requirements given in this standard reference is made to “the relevant data sheet”. For some lamps these data sheets are contained in this standard. For other lamps, falling under the scope of this standard, the relevant data are supplied by the lamp manufacturer or responsible vendor.$ NOTE 1 A lamp used in China having a rated wattage 15 W and rated voltage 220 V is included. Note deleted
Luminaires — Part 2: Particular requirements — Section 8: Handlamps
This section of IEC 60598-2 specifies requirement for recessed luminaires for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltage out exceeding1 000V. This section does not cover air-handing luminaires. This section does not apply to air-handing or luquid-cooled luminaires.
Luminaires - Part 2: Particular requirements - Section 2: Recessed luminaires
Luminaires - Part 2: Particular requirements - Section 3: Luminaires for road and street lighting
Luminaires - Part 2: Particular requirements; section 6: Luminaires with built-in transformers or converters for filament lamps (IEC 60598-2-6:1994/A1:1996); German version EN 60598-2-6/A1:1997
This notice should be filed in front of MIL-L-23614B, dated 5 October 1973, and Amendment 1, dated 18 March 1977.
LIGHT, MARKER, DISTRESS, AIRCREW, SDU-30
This section of IEC 60598-2 specifies requirements for luminaires intended for use where the necessity of limited temperature on the outer surface exists, due to the risk of combustible dust accumulating on the luminaires, but where the risk of explosion in the atmosphere does not exist. The luminaires are for use with electric light sources on supply voltages not exceeding 1000 V. This standard specifically excludes requirements for luminaires for use in explosive gas atmospheres and explosive dust atmospheres. A special limitation of the temperature of luminaires likely to be covered by combustible dust applies, for instance in locations where textile materials are processed or stored and in spaces where combustible dust, for instance colour powder, wood dust, grain dust, flour and textile dust, are accumulated in large quantities but where the risk of explosion does not exist. 1 Norma tive references The following normative documents contain provisions which, through reference in this text, constitute provisions of this section of IEC 60598-2. At the time of publication, the editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this section of IEC 60598-2 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC and ISO maintain registers of currently valid international Standards. IEC 60050(426): 1990, International Electrotechnical Vocabulary - Chapter 426: Electrical apparatus for explosive atmospheres IEC 60598-1: 1996, Luminaires - Part 1: General requirements and tests ISO 4225: 1994, Air quality - General aspects - Vocabulary
Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures
Luminaires. Part 2 : particular requirements. Section 2 : recessed luminaires.
This is Amendment 1 to IEC 60901-1996 (Single-capped fluorescent lamps Performance specifications)
Single-capped fluorescent lamps - Performance specifications; Amendment 1
Modification 2 of NF EN 60598-2-7-1991
Modification 13 of NF EN 60598-2-7-1991
The dimensional features and the material of refractors as described in ANSI C136.14 are covered.
Roadway lighting equipment - Enclosed side-mounted luminaires for horizontal-burning high-intensity discharge lamps - Mechanical interchangeability of refractors
Luminaires - Part 2: Particular requirements - Section 3: Luminaires for road and street ligthing; Amendment 1
This section of part 2 of IEC 60598 specifies requirements for portable general purpose luminaires, other than handlamps, for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 250 V. It is to be read in conjunction with those sections of part 1 to which reference is made.
Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires
Luminaires - Part 2: Particular requirements; section 7: Portable luminaires for garden use (IEC 60598-2-7:1982/A2:1994, modified); German version EN 60598-2-7/A2:1996
Recessed luminaires for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltage not exceeding 1000 V. Does not cover air-handling or liquid-cooled luminaires. To be read in conjunction with BS EN 60598-1:1997
Luminaires - Particular requirements - Recessed luminaires
Dimensional, maintenance, and light distribution features that will permit interchange of post top-mounted luminaires whose center of mass is approximately over the mounting tenon are covered.
Roadway lighting equipment - Enclosed post top-mounted luminaires
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号