共找到 556 条与 特殊灯具 相关的标准,共 38 页
Covers the maintenance of helmet light assemblies, including the routine of the lamp-room, the training of mine workers in the use of helmet light assemblies, and the training of lamp-room personnel.
Maintenance of helmet light assemblies
For ordinary interior use on supply voltages not exceeding 1000 V. To be read in conjunction with BS EN 60598-1
Slide Projection Lamps, Condensing, Dichroic,1.65 in. (42 mm), Integral-Reflector, Rim Reference TH Lamps with GX5.3 Base
Contains information on Slide Projection Lamps, Condensing, Dichroic, 1.65 in. (42mm), Integral-Reflector, Rim Reference TH Lamps with GX5.3 Bases and Slide Projection Lamps, Condensing, Dichroic, Two-inch (51mm) Integral-Reflector, Rim Reference TH Lamp
Slide Projection Lamps, Condensing, Dichroic,Two-inch (51 mm) Integral-Reflector, Rim Reference TH Lamps with GY5.3 Bases
Stage-used electric single-point lifter
The document applies for fixing elements for projectors according to DIN 15560 Part 1 with a maximum weight of 60 kg including accessories and for fixing elements for spotlights for photographic and reportage use with a maximum weight of 7,5 kg including accessories.#,,#
Spotlights for film and television studios, stages and photographic use - Part 24: Fixing elements for projectors and luminaires, main reflector support, pipe clamp, pivot plug, socket for pivot plug for photo-luminaires and reportage-luminaires
Detail specification for type HXF28-150 aircraft taxiiog lamp
The document specifies the dimension of fresnel lenses for projectors for film and television studios, stage and photographic use.#,,#
Projectors for film and television studios, stage and photographic use - Part 2: Fresnel lenses, specifications
Luminaires - Part 2: Particular requirements; section 9: Photo and film luminaires (non-professional) (IEC 60598-2-9:1987/A1:1993); German version EN 60598-2-9/A1:1994
This standard covers locking-type photocontrols used in roadway and area lighting equipment, which may be physically and electrically interchanged to operate within established values.
Roadway lighting equipment - Locking-type photocontrol devices and mating receptacle physical and electrical interchangeability and testing
Roadway lighting equipment - Film cutouts
本标准规定了影视舞台用的聚光灯具的分类、要求、试验方法、抽样、标志、标签、包装。 本标准适用于电影拍摄、电视摄像、舞台演出时作照明用的聚光灯具系列(以下简称“灯具”)。
Technical requirements for spotlights for film and television stage
本标准规定了散光灯具的分类、技术要求、试验方法、质盆评定规则和标志、包装、运输、贮存。 本标准适用于以白炽灯、卤钨灯、气体放电灯为光源的,其电源电压不超过l000v的散光灯具。
Specifications for astigmatism lamps and lanterns for film and television stage
本标准规定了特殊效果灯(器)具的分类、技术要求、试验方法、质量评定规则和标志、包装、运输、贮存。 本标准适用于以白炽灯、卤钨灯和气休放电灯为光源的,其电源电压不超过l000V的特殊效果灯(器)具。
Technical conditions for special effect lamps (apparatus) for film and television stage
This section of IEC 60598-2 details specific requirements for luminaires for use with tungsten filament, fluorescent and other discharge lamps on supply voltages not exceeding 1 000 V for use in clinical areas in which medical treatment, examination and medical care takes place in hospitals and health care buildings. !This standard does not apply to medical electrical equipment, as defined in IEC 60601-1 and IEC 60606-2-41, containing a light source." NOTE 1 Medical electrical equipment may have luminaires for medical examination purposes which are covered by IEC 60601-1 and IEC 60601-2-41." This standard does not apply to luminaires for emergency lighting and luminaires for general illumination in non-clinical areas (e.g. offices). NOTE 2 For these luminaire types, reference should be made to other sections of IEC 60598-2. This standard does not apply to luminaires or parts of luminaires which are designed to be sterilized by the autoclave process and luminaires for operating tables.
Luminaires - Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings
本标准规定了聚光灯泡及反射型聚光、摄影灯泡(以下简称“灯泡”)的术语、产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于供电电压为220V、功率不大于3000W,应用于电影摄影、舞台配光和强光照明用的聚光灯泡及反射型聚光、摄影灯泡。 本标准应同QB/T 2048共同使用。
Spotlight bulbs and reflective spotlights, photography bulbs
本标准规定了反射型照相灯泡(以下简称“灯泡”)的术语、产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用子供电电压为220V或ll0V、功率不大于500W,应用于摄影照明的反射型照相灯泡。 本标准应同QB/T2048《一般白炽灯泡总技术条件》共同使用。
reflective photo bulb
本标准规定了红外线灯泡(以下简称“灯泡”)的术语、产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于供电电压为110V或220V、功率不大于50OW ,应用于工业干燥、医疗、家畜饲养等加热用的灯泡。 本标准应同QB/T 2048《一般白炽灯泡总技术条件》共同使用。
infrared light bulb
本标谁规定了照相灯抱(以下简称“灯泡”)的术语、产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于供电电压为220V、功率不大于30OW 、应用于摄影照明的照相灯泡。 本标谁应同QB/T 2048《一般白炽灯泡总技术条件》共同使用。
photo bulb
本标准规定了照相放大灯饱(以下简称“灯泡”)的术语、产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于供电电压为220V、功率不大于200W,用于照相放大机中的感光光源. 本标准应同QB/T 2048《一殷白炽灯泡总技术条件》共同使用。
photo magnifying light bulb
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号