共找到 1112 条与 灯具附件 相关的标准,共 75 页
Provides approval and test specifications for bayonet lamp holders for the purposes of safety and approval for sale in Australia and New Zealand.
Approval and test specification - Bayonet lampholders
Specifies requirements for Edison-type screw lampholders.
Approval and test specification - Edison-type screw lampholders
Specifies particular safety requirements for electronic controlgear for use on d.c. supplies up to 250 V and a.c. supplies up to 1 000 V at 50 Hz or 60 Hz and at an output frequency which can deviate from the supply frequency, associated with LED modules.
Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
Specifies safety requirements for ballasts, excluding resistance types, for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, associated with fluorescent lamps with or without pre-heated cathodes operated with or without a starter or starting device and having rated wattages, dimensions and characteristics as specified in IEC 60081 and IEC 60901 (published in South Africa as identical adoptions under the designations SANS 60081 and SANS 60901).Applies to complete ballasts and to their component parts such as reactors, transformers and capacitors.
Lamp controlgear Part 2-8: Particular requirements for ballasts for fluorescent lamps
Lamp controlgear - Part 2-7 : particular requirements for d.c. supplied electronic ballasts for emergency lighting.
Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements (IEC 61048:2006); German version EN 61048:2006
この規格は,電球及び準照明器具を電源に接続するために設計されたねじ込みランプソケットEll, E12,E14,EZ14, E17, E26及びE39に適用する。
Edison screw lampholders
This specification covers functional, self-testing, press to test indicator lights.
LIGHTS, INDICATORS, PRESS TO TEST
This part of IEC 61347 specifies general and safety requirements for lamp controlgear for use on d.c. supplies up to 250 V and/or a.c. supplies up to 1 000 V at 50 Hz or 60 Hz. This standard also covers lamp controlgear for lamps which are not yet standardized. Tests dealt with in this standard are type tests. Requirements for testing individual lamp controlgear during production are not included. Requirements for semi-luminaires are given in IEC 60598-1 (see definition 1.2.60). In addition to the requirements given in this Part 1 of IEC 61347, Annex B sets out general and safety requirements applicable to thermally protected lamp controlgear. Annex C sets out additional general and safety requirements as they apply to electronic lamp controlgear with means of protection against overheating. Additional requirements for built-in ballasts with double or reinforced insulation are given in Annex I.
Lamp controlgear - Part 1: General and safety requirements
Ballasts for tubular fluorescent lamps - Performance requirements (IEC 60921:2004 + A1:2006); German version EN 60921:2004 + A1:2006
This document sets forth the specifications for bases (caps) used on electric lamps.
Electrical Lamp Bases
This document sets forth the specifications for lampholders for electric lamps.
Electric Lamp Lampholders
本标准规定了1000V以下,5OHz交流电源供电,工作频率超过电源频率的单端无极荧光灯用电子镇流器的术语和定义、一般要求和安全要求、性能要求以及试验方法。 本标准适用于单端无极荧光灯。
AC-supplied electronic ballasts for electrodeless fluorescent lamps
本标准规定了直流或交流电子镇流器的性能要求。电源包括5OHz/60Hz、1000V以下的交流电源。此类镇流器是一种装有触发和稳定部件的转换器,这种转换器能在直流或与电源频率不同的频率下使放电灯工作。与镇流器匹配的放电灯包括高压汞灯、高压纳灯和金属卤化物灯。 本标准不包括荧光灯和低压纳灯用镇流器以及如剧院和机动车辆用特种灯用镇流器。
Auxiliaries for lamps.D.C.or A.C.supplied electronic ballasts for discharge lamps (excluding fluorescent lamps).performance requirements
Specifies requirements for ballasts for fluorescent lamps (hot cathode type only) for operation without starters (class B lamps), with insulation of at least class A, with the power factor corrected or uncorrected, for use on a.c. supply voltages of 110
Ballasts for fluorescent lamps Part 2: Ballasts for lamps for operation without starters (class B lamps)
This international standard specifies performance requirements for electronic control gear for use on d.c. supplies up to 250 V and a.c. supplies up to 1 000 V at 50 Hz or 60 Hz with an output frequency which can deviate from the supply frequency, associated with LED modules according to IEC 62031. Control gear for LED modules specified in this standard are designed to provide constant voltage or current. Deviations from the pure voltage and current types do not exclude the gear from this standard. NOTE 1 The tests in this standard are type tests. Requirements for testing individual control gear during production are not included. NOTE 2 Requirements for control gear which incorporate means for varying the output power are under consideration. NOTE 3 It may be expected that control gear complying with this standard will ensure satisfactory operation between 92 % and 106 % of the rated supply voltage, taking into account the specifications of the LED module manufacturer.
DC or AC supplied electronic control gear for LED modules - Performance requirements
Specifies the essential design features and operating characteristics of reference ballasts for class B fluorescent lamps for use on a.c. supplies at a frequency of 50 Hz.
Reference ballasts for class B fluorescent lamps
This standard concerns low frequency square wave ballasts for metal halide lamps.
Low Frequency Square Wave Ballasts for Metal Halide Lamps
Lamp controlgear - Part 2-9 : particular requirements for ballasts for discharge lamps (excluding fluorescent lamps).
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号