K74 灯具附件 标准查询与下载

DLA MS21998 REV C NOTICE 2-2006 笔形手电筒

The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil

FLASHLIGHT, PENLIGHT STYLE

DLA MS24526 REV D NOTICE 4-2006 飞行器信号识别灯灯座

The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil/

BASE, AIRPORT MARKER LIGHT

DLA MS26578 REV B NOTICE 1-2006 双向和单向基座安装半埋入式飞行器信号识别灯

LIGHTS, MARKER, AIRPORT, SEMIFLUSH, BASED MOUNTED,BIDIRECTIONAL AND UNIDIRECTIONAL

LIGHTS, MARKER, AIRPORT, SEMIFLUSH, BASE MOUNTED, BIDIRECTIONAL AND UNIDIRECTIONAL

DLA MS26580 B REINST NOTICE 1-2006 毛坯飞行器信号识别灯座套

The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

COVER, AIRPORT MARKER LIGHT BASE, BLANK

KS C IEC 60061-4:2005 灯头、灯座及检验其安全性和互换性的量规.第4部分:导则及通用信息

호환성 및 안전성 제어를 위한 게이지 및 램프 캡과 소켓-제4부:지침 및 일반 정보

Lamp caps and holders together with gauges for the control of interchangeability and safety-Part 4:Guidelines and general information

JIS C 8147-2-2:2005 灯控制设备.第2-2部分:白炽灯用直流或交流电子降压转换器的特殊要求

JIS C 8147-1のこの部では，JIS C 7527に規定されたタングステンハロゲン電球及び他の白熱電球用として，250V以下の直流電源，及び/又は1000V以下の50Hz又は60Hzの交流電源で使用され，電源周波数と異なる周波数で実効値が50V以下の定格出力電圧，

Lamp controlgear -- Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps

JIS C 8147-2-1:2005 灯控制设备.第2-1部分:启动装置(不含辉光启动器)的特殊要求

この規格は，100kV以下の始動パルスを発生させる始動装置のうち，JIS C 7601,JIS C 7606,JIS C 7610,JIS C 7621,JIS C 7623,JIS C 7617-1,JIS C 7618-1,JIS C 8147-2-8及びJIS C 8147-2-9で扱うランプ及び安定器と組み合わせて使用する50Hz又は60Hzの1000V以下の交流電源で使用する蛍光ランプ及び他の放電ランプ用始動装置(グロースタータ以外のスタータ及びイグナイタ)について個別安全要求事項を規定する。

Lamp controlgear -- Part 2-1: Particular requirements for starting devices (other than glow starters)

JIS C 8147-2-11:2005 灯控制设备.第2-11部分:与照明设备一同使用的其它电子电路的特殊要求

この規格は，50Hz又は60Hzの1OOOVまでの交流電源及び/又は250Vまでの直流電源で使用するその他の照明器具用電子回路に対する一般及び安全要求事項について規定する。

Lamp controlgear -- Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires

DIN 34827:2005 内六角螺钉

The standard specifies the characteristics and the designation, of hexalobular socket set screws made of steel and of stainless steel with flat, cone, dog or cup point.

Hexalobular socket set screws

DIN 34824:2005 螺栓和螺钉用12孔座

This standard specifies the dimensions of 12 point sockets as driving feature for bolts and screws.

12 point socket for bolts and screws

DIN 34821:2005 12孔座的凸头螺钉

This standard specifies dimensions and technical delivery conditions for M6 to M16 and M12 × 1,5 to M16 × 1,5 cheese head screws with 12 point socket, of property classes 8.8, 10.9 and A2-70, and product grade A.

Cheese head screws with 12 point socket

IEC 61347-2-1:2000/AMD1:2005 灯控装置.第2-1部分:起动装置(辉光起动器除外)的特殊要求.修改件1

This is Amendment 1 to IEC 61347-2-1-2000 (Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters))

Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters); Amendment 1

DIN 34822:2005 带法兰的12孔座凸头螺钉

This standard specifies dimensions and technical delivery conditions for M6 to M16 and M12 ×1,5 to M16 × 1,5 cheese head screws with flange, with 12 point socket, of property classes 8.8, 10.9 and A2-70, and product grade A.

Cheese head screws with flange with 12 point socket

DIN 34823:2005 12孔座的半埋头螺钉

This standard specifies dimensions and technical delivery conditions for M6 to M10 raised countersunk head screws with 12 point socket, of property classes 8.8 and A2-70, and product grade A.

Raised countersunk head screws with 12 point socket

IEC 60923:2005 灯附件.放电灯(管形荧光灯除外)用镇流器.性能要求

This International Standard specifies performance requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium vapour and metal halide lamps. Clauses 12 through 15 each detail specific requirements for a particular type of ballast. This standard covers inductive type ballasts for use on a.c. supplies up to 1 000 V at 50 Hz to 60 Hz associated with discharge lamps, having rated wattage, dimensions and characteristics as specified in the relevant IEC lamp standards. NOTE 1 For certain types of discharge lamps an ignitor is required. NOTE 2 Extension of the standard to cover ballasts incorporating, or for use with, series capacitors is under consideration. NOTE 3 The performance requirements of ballasts for tubular fluorescent lamps are covered by IEC 60921. NOTE 4 There are regional standards regarding the regulation of mains current harmonics for end-products such as luminaires and independent control gear. In a luminaire the control gear is dominant in this respect. Control gear, together with other components, should comply with these standards.

Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements

TB/T 2219-2005 铁道客车双端荧光灯用直流电子镇流器

本标准规定了由直流电源供电的铁道客车双端荧光灯（以下简称荧光灯）用直流电子镇流器（以下简称镇流器）的技术要求、试验方法、检验规则、标志、包装、运输、贮存等。 本标准适用于由直流电源供电的铁道客车双端荧光灯用直流电子镇流器。

DC supplied electronic ballasts for railway passenger car

ANSI C81.64-2005 电灯灯头、灯座和量规的一般信息和指南

This standard gives guidance and information to designers and testing personnel and includes the designation system and general information regarding bases (caps), lampholder and gauges.

Guidelines and General Information for Electrical Lamp Bases, Lampholders, and Gauges

DLA SMD-5962-02503 REV A-2005 单片硅辐射硬化线性微电路负低压降可调式稳压器

This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V).

MICROCIRCUIT, LINEAR, RADIATION HARDENED, NEGATIVE LOW DROPOUT ADJUSTABLE VOLTAGE REGULATOR, MONOLITHIC SILICON

JIS C 8121-1:2005 各种灯座.第1部分:一般要求和试验

この規格は，組込形の様々なタイプのランプソケット，例えば，附属書Aに記載した口金をもつ一般照明用光源，投射ランプ，投光ブンプ及び街路灯ランプを用いるためのラノプソケヅト(以下,ランプソケットという。)の一般要求事項及びランプソケットの安全使用を決定する試験方法について規定する。

Miscellaneous lampholders -- Part 1: General requirements and tests

JIS C 8472:2005 照明用汇流条通道.照明用途的特殊安全要求

この規格は，照明器具に電源を供給する2以上の極を備え，次のいずれかからなる，照明器具用ライティングダクトについて規定する。

Lighting busways -- Particular safety requirements for luminaires use