K74 灯具附件 标准查询与下载

NF C47-733/A11:2005 家用和类似用途的自动电控设备.第2-3部分:管状荧光灯镇流器热保护器特殊要求

Automatic electrical controls for household and similar use - Part 2-3 : particular requirements for thermal protectors for ballasts for tubular fluorescent lamps.

DIN EN 60838-2-1:2005 各式灯座.第2部分:特殊要求.第1节:S14型灯座

Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14 (IEC 60838-2-1:1994 + A1:1998 + A2:2004); German version EN 60838-2-1:1996 + A1:1998 + A2:2004

IEC 60061-DB:2005 灯头、灯座及检验其安全性和互换性的量规.包括IEC 60061所有部分在内的在线数据库的全年定购

Contains the recommendations of the IEC in regard to lamp caps and holders in general use, together with relevant gauges, with the object of securing international interchangeability. The standard consists of four parts: Part 1: Lamp caps; Part 2: Lampho

Lamp caps and holders together with gauges for the control of interchangeability and safety - 12-month subscription to online database comprising all parts of IEC 60061

JIS C 8147-2-8:2005 灯控制设备.第2-8部分:荧光灯镇流器的特殊要求

JIS C 8147のこの部では. JIS C 7617-2,JIS C 7618-2で規定する定格電力，寸法及び特性をもつ，予熱電極をもつ又はもたない，又は，スタータ又は始動装置をもつ又はもたない蛍光ランプ並びにJIS C 7605で規定する殺菌用低圧水銀放電管,に用いられる50Hz又は60 Hzの1000Vまでの交流電源で使用する，定格二次電圧が1000V以下の抵抗形を除く安定器の個別安全要求事項を規定する。この規格は,まだ規格化されていない蛍光ランプにも適用する。

Lamp controlgear -- Part 2-8: Particular requirements for ballasts for fluorescent lamps

JIS C 8147-2-9:2005 灯控制设备.第2-9部分:放电灯(荧光灯除外)镇流器的特殊要求

この規格は，JIS C 7604に規定の高圧水銀ランブ，JIS C 7610に規足の低圧ナトリウムランプ.JIS C 7621に規定の高圧ナトリウムランプ及びJIS C 7623に規定のメタルハライドランプを点灯する磁気回路式放電灯安定器のうち.定格周波数50Hz又は60Hzの1000V以下の交流電源で定格二次電圧が1000V以下の照明に使用される安定器の個別安全要求事項を規定する。

Lamp controlgear -- Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)

JIS C 8147-1:2005 灯控制设备.第1部分:一般和安全要求

JIS C 8147の第1部は，250V以下の直流電源，及び/又は1000V以下の50Hz，又は60Hzの交流電源に使用する。ランプ制御装置の一般及び安全性要求事項について規定する。

Lamp controlgear -- Part 1: General and safety requirements

JIS C 8147-2-3:2005 灯控制设备.第2-3部分:荧光灯用交流电子镇流器的特殊要求

JIS C 8147-2-3のこの部では，JIS C 7617-2, JIS C 7618-2で規定する蛍光ランプ又は高周波点灯用の他の蛍光ランプと一緒に組み合わせて使用される,電源周波数とは異なる周波数で動作する，交流1000V以下の50Hz又は60Hzの電源で使用する，定格二次電圧が1000V以下の電子安定器についての個別安全要求事項を規定する。

Lamp controlgear -- Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps

SANS 61047:2005 白炽灯上的直流或交流供电式电子降压转换器.性能要求

Specifies performance requirements for electronic step-down convertors for use on d.c. supplies up to 250 V and a.c. supplies up to 1 000 V at 50 Hz or 60 Hz with operating frequencies deviating from the supply frequency, associated with tungsten halogen lamps as specified in SANS 60357 and other filament lamps.

DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements

NF C61-550:2005 爱迪生螺口灯座

Edison screw lampholders.

JIS C 7709-1 AMD 1 ERRATUM 1:2005 勘误

ERRATUM

JIS C 7709-3 AMD 1 ERRATUM 1:2005 勘误

ERRATUM

JIS C 7709-2 AMD 1 ERRATUM 1:2005 勘误

ERRATUM

NF C71-213/A2:2005 管形荧光灯灯座和起动器座

Lampholders for tubular fluorescent lamps and staterholders.

NF C61-530-1:2005 杂类灯座.第1部分:一般要求和试验

Miscellaneous lampholders - Part 1 : general requirements and tests.

NF C71-237/A2:2005 灯具附件.起动装置(辉光起动器除外).性能要求

Auxiliaries for lamps - Starting devices (other than glow tarters) - Performance requirements.

NF C71-000:2005 灯具.第1部分:一般要求和试验

Luminaires - Part 1 : general requirements and tests.

NF C61-510/A2:2005 卡口灯座

Bayonet lampholders.

BS EN 60921:2004 管形荧光灯用镇流器.性能要求

This standard specifies performance requirements for ballasts, excluding resistance types, for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, associated with tubular fluorescent lamps with pre-heated cathodes operated with or without a starter or starting device and having rated wattages, dimensions and characteristics as specified in IEC 60081 and 60901. It applies to complete ballasts and their component parts such as resistors, transformers and capacitors. A.C. supplied electronic ballasts for tubular fluorescent lamps for high frequency operation specified in IEC 61347-2-3 are excluded from the scope of this standard. NOTE In some regions there are laws on EMC for luminaires. The controlgear also contributes to this EMC behaviour. See Bibliography for further references.

Ballasts for tubular fluorescent lamps - Performance requirements

BS EN 60238:2005 埃德森螺口灯座

Edison screw lampholders

BS EN 60238:2004 埃德森螺口灯座

This International Standard applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires only. It also applies to switched-lampholders for use in a.c. circuits only, where the working voltage does not exceed 250 V r.m.s. This standard also applies to lampholders with Edison thread E5 designed for connection to the supply mains of series connected lamps, with a working voltage not exceeding 25 V, to be used indoors, and to lampholders with Edison thread E10 designed for connection to the supply mains of series connected lamps, with a working voltage not exceeding 60 V, to be used indoors or outdoors. It also applies to lampholders E10 for building-in, for the connection of single lamps to the supply. These lampholders are not intended for retail sale. As far as it reasonably applies, this standard also covers lampholders other than lampholders with Edison thread designed for connection of series-connected lamps to the supply. NOTE This type of lampholder is for example used in Christmas tree lighting chains. As far as it reasonably applies, this standard also covers adapters. This standard also covers lampholders which are, wholly or partly, integral with a luminaire or intended to be built into appliances. It covers the requirements for the lampholder only. For all other requirements, such as protection against electric shock in the area of the terminals or of the lamp cap, the requirements of the relevant appliance standard shall be observed and tested after building into the appropriate equipment, when that equipment is tested according to its own standard. Such lampholders as well as lampholders provided with a snap-on outer shell, for use by luminaire manufacturers only, are not for retail sale. This standard applies to lampholders to be used indoors or outdoors in residential as well as in industrial lighting installations. It also applies to candle lampholders. In locations where special conditions prevail, as for street lighting, on board ships, in vehicles and in hazardous locations, e.g. where explosions are liable to occur, special constructions may be required. NOTE 1 This standard does not apply to three-light lampholders E26d. NOTE 2 This standard is based on the following data relative to lamps for general lighting service: - caps E14 are used for lamps with a current not exceeding 2 A; - caps E27 are used for lamps with a current not exceeding 4 A; - caps E40 are used for lamps with a current not exceeding 16 A. NOTE 3 If the nominal voltage of the supply does not exceed 130 V, the maximum current for caps E40 is 32 A (see 4.5 and 5.3). NOTE 4 Where lampholders are used in luminaires, their maximum operating temperatures are specified in IEC 60598. note:* Requirements for lampholders suitable for semi-luminaires are under consideration.

Edison screw lampholders