K74 灯具附件 标准查询与下载

SANS 1088:2004 灯具引入线和插口

Covers the material, dimensional, constructional, and finish requirements of luminaire entries and spigots used to connect luminaries and their supports.

Luminaire entries and spigots

ANSI C136.9-2004 道路照明.金属头中使用的灯座支撑组件的机械互换性

This standard covers dimensional, maintenance, and light distribution features that permit the interchange of enclosed, post top-mounted luminaires whose center of mass is approximately over the mounting tenon.

Roadway Lighting – Socket Support Assemblies for Use in Metal Heads, Mechanical Interchangeability

IEC 60061-4:2004 灯头、灯座及检验其安全性和互换性的量规 第4部分：导则及一般信息

本标准等同采用IEC 6006-4：2004《灯头、灯座及检验其互换性和安全性的量规第4部分：导则 及一般信息》(英文版)。 本标准等同翻译IEC 60061—4：2004。 为便于使用，本标准做了下列编辑性修改： a) “本国际标准”一词改为“本标准”； b)用小数点“．”代替作为小数点的“，”； c)删除IEC 60061—4：2004的前言； d)增加了章标题。 本标准自实施之日起，QB 2218—1996((灯头、灯座的型号命名方法》同时废止。

Lamp caps and holders together with gauges for the control of safety and interchangeability -Part4:Guidelines and general information

CSA C22.2 No.43-04-2004 灯座.第1次修订

This Standard applies to single-phase and polyphase transformers of the dry type for supplying energy to power, heating, and lighting circuits and designed to be installed and used in accordance with the Rules of the Canadian Electrical Code, Part I.

Douilles De Lampe Mise ?jour No 1

DIN EN 60570:2004 灯具用电源导轨装置

Electrical supply track systems for luminaires (IEC 60570:2003, modified); German version EN 60570:2003

ANSI C82.1-2004 荧光灯镇流器规范

This standard is intended to cover ballasts which have rated open-circuit voltages of 2000 volts or less and are intended to operate lamps at a frequency of 50 Hz or 60 Hz.

Lamp Ballast-Line Frequency Fluorescent Lamp Ballast

IEC 61184:2004 卡口灯座

本标准适用于将灯泡和半灯具连接到250 V电源电压上的B15d和B22d卡口灯座。 本标准还适用于和灯具一体化或用于安装在设备内部的灯座，但仅包括对灯座的要求。 对于所有其他的要求，例如接线端子区域的防触电保护，应符合相关器具的标准要求，并且应首先 安装在合适的装置中，当根据这个装置自身的标准进行检验时，同时对其进行试验。供灯具制造商使用 的灯座不应零售。 不是专门用于内装的独立式灯座，例如平装式灯座，还要采用第3章所述的附加要求。 注：在灯具中使用的灯座的最高工作温度在GB 7000．1中给出。 B15表示由IEC 60061—1的活页7004—11和IEC 60061—2的活页7005一16及相应量规所决定的灯 头／灯座配合系统。 B22表示由IEC 60061—1的活页7004—10和IEC 60061—2的活页7005—10及相应量规所决定的灯 头／灯座配合系统。

Bayonet lampholders

CSA C22.2 No.43-04-CAN/CSA-2004 灯座.第5版.第1次修订

This Standard contains basic requirements for products covered by Underwriters Laboratories Inc. (UL) under its Follow-Up Service for this category within the limitations given below and in the Scope section of this Standard. These requirements are base

Lampholders Fifth Edition; Update No.1

ANSI/IEC C81.63:2004 灯头和灯座用量规的规范

This standard sets forth the specifications for gauges for bases (caps) and lampholders for electric lamps.

Specifications for Gauges for Electric Lamp Bases (Caps) and Lampholders

KS C IEC 60838-2-1:2003 各式灯座.第2部分:特殊要求.第1节:S14灯座

이 규격은 일반 조명용의 선형 백열 램프에 사용하는 독립형 램프홀더와 내장형으로 설계한

Miscellaneous lampholders－Part 2：Particular requirements－Section 1：Lampholders S14

KS C IEC 60838-1:2003 各式灯座.第1部分:总要求和试验

이 규격은 내장형(부속서 A에 나열된 베이스가 달린 가로등과 투광 조명등 및 일반용 램

Miscellaneous lamphoders-Part 1:General requirements and tests

IEC 60929:2003 管形荧光灯用交流供电电子镇流器.性能要求

AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements

JIS C 7622 ERRATUM 1:2003 JIS C7622 勘误表 1

ERRATUM

IEC 60061-2:1969/AMD29:2003 灯头、灯座及检验其安全性和互换性的量规.第2部分:灯座.修改件29

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders; Amendment 29

IEC 60061-1:1969/AMD32:2003 灯头、灯座及检验其安全性和互换性的量规.第1部分:灯头.修改件32

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps; Amendment 32

SANS 60570:2003 灯具用电源导轨装置

Applies to track systems with two or more poles for the connection of luminaires to the electrical supply consisting of either a system with a rated voltage not exceeding 440 V between poles (live conductors) with provision for earthing (class I) and a r

Electrical supply track systems for luminaires

IEC 60061-2:1969/AMD28:2003 灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座.修改件28

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders; Amendment 28

ANSI C78.5-2003 荧光灯自镇流灯的性能指南

Specifies the performance requirements together with the test methods and conditions required to show compliance of self-ballasted compact fluorescent lamps up to 60 watts which are intended for domestic and similar general lighting

Specifications for Performance of Self-Ballasted Compacted Fluorescent Lamps

ANSI C136.4-2003 道路和区域照明设备.系列插座和系列插座插孔

Covers the following equipment for luminaires for lighting roadways: a) Series sockets having medium impact strength and intended for service at high temperatures. b) Series sockets having high impact strength and intended for services at limited tempera

Roadway and Area Lighting Equipment - Series Sockets and Series - Socket Receptacles

ANSI C78.180-2003 荧光灯起辉器的规范

This standard is intended to cover performance of glow switch starters used with preheat-type fluorescent and similar discharge lamps. It does not include starters that are an integral part of a lamp or manually operated switches that may be used for lam

Specifications for Fluorescent Lamp Starters