K84 蓄电能装置 标准查询与下载

BS ISO 12405-1:2011 电动道路车辆.锂离子蓄电池包和系统用试验规范.大功率应用

Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems. High-power applications

BS EN 62637-2:2011 小型手持式多媒体设备用电池充电接口.2 mm筒式接口一致性测试

This part of the IEC 62637 provides the conformance testing rules and guidelines for equipment built to meet the 2 mm barrel type charging interface specified in the 62637-1.

Battery charging interface for small handheld multimedia devices. 2 mm barrel type interface conformance testing

BS EN 62637-1:2011 小型手持多媒体装置用电池充电器接口.2 mm管接口

This part of IEC 62637 defines a charging interface between small handheld multimedia devices and power-supply accessories, specifically chargers. Devices, which could be based on this standard may vary over time, but have to comply with the limited power available1. The interface is a 2 mm barrel type charging interface. This standard does not include the whole charger nor does it include the internal functions of the device. Chargers and devices shall follow the applicable EMC and safety standards. The scope of this part of IEC 62637 is illustrated in Figure 1.

Battery charging interface for small handheld multimedia devices. 2 mm barrel interface

IEC 61960:2011 含碱性或其它非酸性电解质的蓄电池和畜电池组.便携式二次锂蓄电池和蓄电池组

This International Standard specifies performance tests@ designations@ markings@ dimensions and other requirements for secondary lithium single cells and batteries for portable applications. The objective of this standard is to provide the purchasers and users of secondary lithium cells and batteries with a set of criteria with which they can judge the performance of secondary lithium cells and batteries offered by various manufacturers. This standard defines a minimum required level of performance and a standardized methodology by which testing is performed and the results of this testing reported to the user. Hence@ users will be able to establish the viability of commercially available cells and batteries via the declared specification and thus be able to select the cell or battery best suited for their intended application. This standard covers secondary lithium cells and batteries with a range of chemistries. Each electrochemical couple has a characteristic voltage range over which it releases its electrical capacity@ a characteristic nominal voltage and a characteristic end-of-discharge voltage during discharge. Users of secondary lithium cells and batteries are requested to consult the manufacturer for advice.

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications

SAE J537-2011 蓄电池

This SAE Standard serves as a guide for testing procedures of automotive 12 V storage batteries and as a publication providing information on container holddown configuration and terminal geometry. The ratings submitted are to be based on procedures described in this document. The ratings submitted must be of a level that when any subsequent significant sample is tested in accordance with this document, that at least 90% of the batteries shall meet the ratings. The choice of 90% compliance recognizes that batteries consist of many plates and require chemical-electrical formation procedures and small variations in test conditions and procedures can affect the performance of individual batteries. Future Considerations In order to expedite the release of this revision of the Standard, several topic areas were deferred for consideration in future revisions. These items include, but may not be limited to, the following: post dimension modifications, battery technology agnosticism, and a new, more application relevant change acceptance test.

Storage Batteries

JB/T 11139-2011 锰酸锂蓄电池模块通用要求

本标准规定了由大于或等于6A•h的锰酸锂蓄电池组成的锰酸锂蓄电池模块的术语和定义、分类与型号、要求、试验方法、检验规则、标志、包装、运输和贮存。

General requirement of lithium-ion manganese oxide battery module

JB/T 11140-2011 磷酸亚铁锂蓄电池模块通用要求

本标准规定了由等于或大于6A•h的磷酸亚铁锂蓄电池组成的磷酸亚铁锂蓄电池模块的术语和定义、分类、基本参数、技术要求、检验规则、标志、包装、运输和贮存。

General requirement of lithium-ion phosphate battery module

JB/T 11138-2011 锂离子蓄电池总成接口和通信协议

本标准规定了锂离子蓄电池总成的术语和定义、接口和协议、通讯协议、数据格式及充电设备与锂离子蓄电池总成的工作状态转换。 本标准也适用于组成锂离子蓄电池总成的锂离子蓄电池模块的接口和通讯协议。

Interface and communication protocol of lithum-ion battery assembly

JB/T 11141-2011 锂离子蓄电池模块箱通用要求

本标准规定了锂离子蓄电池模块箱的定义、型号及分类、技术要求、试验方法、检验规则、检验项目、标志、包装、运输和贮存。 本标准适用于由大于或等于6A•h的锰酸锂、磷酸亚铁锂等锂离子蓄电池组成的锂离子蓄电池模块用模块箱及通用型锂离子蓄电池模块。

General requirement for module case of lithium-ion battery

NF C58-272-1:2011 二次蓄电池和电池装置的安全要求.第1部分:一般安全性信息.

Safety requirements for secondary batteries and battery installations - Part 1 : general safety information.

IEC 61951-2:2011 含碱性或其它非酸性电解质的二次电池和蓄电池组.便携式密封可再充电单电池.第2部分:镍金属氢化物电池

This part of IEC 61951 specifies marking@ designation@ dimensions@ tests and requirements for portable sealed nickel-metal hydride@ small prismatic@ cylindrical and button rechargeable single cells@ suitable for use in any orientation.

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride

MT 658-2011 煤矿用特殊型铅酸蓄电池

本标准规定了煤矿用特殊型铅酸蓄电池的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于煤矿电力牵引车辆和物料搬运设备用蓄电池。

Special type lead acid batteries for coal mine

IEC 62637-2:2011 小型手持多媒体装置用电池充电器接口.第2部分:2 mm管型接口一致性测试

This part of the IEC 62637 provides the conformance testing rules and guidelines for equipment built to meet the 2 mm barrel type charging interface specified in the 62637-1.

Battery charging interface for small hand held multimedia devices - Part 2: 2 mm barrel type interface conformance testing

BS EN 50272-1:2010 二次电池和电池装置的安全性要求.一般安全性信息

Safety requirements for secondary batteries and battery installations. General safety information

SAE J2929-2011 电动和混合动力汽车推进电池系统安全性标准.锂基可充电电池

This SAE Standard defines a minimum set of acceptable safety criteria for a lithium-based rechargeable battery system to be considered for use in a vehicle propulsion application as an energy storage system connected to a high voltage power train. While the objective is a safe battery system when installed into a vehicle application, this Standard is primarily focused, wherever possible, on conditions which can be evaluated utilizing the battery system alone. As this is a minimum set of criteria, it is recognized that battery system and vehicle manufacturers may have additional requirements for cells, modules, packs and systems in order to assure a safe battery system for a given application. A battery system is a completely functional energy storage system consisting of the pack(s) and necessary ancillary subsystems for physical support and enclosure, thermal management, and electronic control.and suppliers in this industry are encouraged to present data and results in these formats.

Electric and Hybrid Vehicle Propulsion Battery System Safety Standard Lithium-based Rechargeable Cells

ANSI/UL 1236a-2011 装载发电机启动器蓄电池用蓄电池充电器的安全标准

This recirculation proposal provides revisions to the UL 1236 proposals dated 1-28-11.

Standard for Safety for Battery Chargers for Charging Engine-Starter Batteries (Proposal dated 5-6-11)

DIN SPEC 91252:2011 电动道路车辆.蓄电池系统.锂离子电池单元的尺寸规格

Electrically propelled road vehicles - Battery systems - Dimensions for Lithium-Ion-Cells

ANSI C18.3M Part 2-2011 便携式一次性锂电池.安全标准

Specifies tests and requirements for portable primary lithium cells and batteries, both the chemical systems and the types covered in ANSI C18.3M, Part 1, to ensure their safe operation under normal use and reasonably foreseeable misuse. For reference, the chemical systems standardized in ANSI C18.3M, Part 1 are: Lithium carbon monofluoride; Lithium manganese dioxide; Lithium iron disulfide.

Portable Lithium Primary Cells and Batteries - Safety Standard

ANSI/ABYC E-10-2011 蓄电池

Provides a guide for the selection, location, installation, and wiring of storage batteries.

Storage Batteries

IEEE 1725-2011 移动电话用可再充电电池

Rechargeable batteries for cellular telephones