K84 蓄电能装置 标准查询与下载

ANSI C18.1M Part 2-2011 有水溶电解质的便携式原电池和蓄电池组.安全标准

Specifies performance requirements for portable primary batteries with aqueous electrolyte and zinc anode (non-lithium) to ensure their safe operation under normal use and reasonably foreseeable misuse.

Portable Primary Cells and Batteries with Aqueous Electrolyte - Safety Standard

BS EN 50342-5:2010 铅酸起动蓄电池组.蓄电池外壳和手柄特性

Lead-acid starter batteries. Properties of battery housings and handles

IEC 62660-1:2010 电气公路用车的驱动用辅助锂电池.第1部分:性能试验

This part of IEC 62660 specifies performance and life testing of secondary lithium-ion cells used for propulsion of electric vehicles including battery electric vehicles (BEV) and hybrid electric vehicles (HEV). The objective of this standard is to specify the test procedures to obtain the essential characteristics of lithium-ion cells for vehicle propulsion applications regarding capacity, power density, energy density, storage life and cycle life. This standard provides the standard test procedures and conditions for testing basic performance characteristics of lithium-ion cells for vehicle propulsion applications, which are indispensable for securing a basic level of performance and obtaining essential data on cells for various designs of battery systems and battery packs. NOTE 1 Based on the agreement between the manufacturer and the customer, specific test conditions may be selected in addition to the conditions specified in this standard. Selective test conditions are described in Annex A. NOTE 2 The performance tests for the electrically connected lithium-ion cells may be performed with reference to this standard. NOTE 3 The test specification for lithium-ion battery packs and systems is defined in ISO 12405-1 and ISO 12405-2 (under consideration).

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing

IEC 62660-2:2010 电气公路用车的驱动用辅助锂电池.第2部分:可靠性和滥用试验

This part of IEC 62660 specifies test procedures to observe the reliability and abuse behaviour of secondary lithium-ion cells used for propulsion of electric vehicles including battery electric vehicles (BEV) and hybrid electric vehicles (HEV). The objective of this standard is to specify the standard test procedures and conditions for basic characteristics of lithium-ion cells for use in propulsion of battery and hybrid electric vehicles. The tests are indispensable for obtaining essential data on reliability and abuse behaviour of lithium-ion cells for use in various designs of battery systems and battery packs. This standard provides standard classification of description of test results to be used for the design of battery systems or battery packs. NOTE 1 The reliability and abuse tests for the electrically connected lithium-ion cells may be performed with reference to this standard. NOTE 2 The test specification for lithium-ion battery packs and systems is defined in ISO 12405-1 and ISO 12405-2 (under consideration).

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing

DIN EN 60335-2-29:2010 家用和类似用途电器.安全性.第2-29部分:蓄电池充电器的详细要求(IEC 60335-2-29-2002 + A1-2004 + A2-2009).德文版本EN 60335-2-29-2004 + A2-2010

Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers (IEC 60335-2-29:2002 + A1:2004 + A2:2009); German version EN 60335-2-29:2004 + A2:2010

UL SUBJECT 3456-2010 SUBJECT 3456 商用手推车用电池调查大纲 发布号:8

This is the eighth issue of the Outline of Investigation for Electric-Battery- Powered Carts For Commercial Use, Subject 3456, which includes revisions to requirements.

SUBJECT 3456 OUTLINE OF INVESTIGATION FOR ELECTRIC-BATTERY-POWERED CARTS FOR COMMERCIAL USE ISSUE NO: 8

JIS C 8702-1 ERRATUM 1:2010 勘误表

ERRATUM

IEC 62485-3:2010 蓄电池组和蓄电池装置安全性要求.第3部分:牵引用蓄电池

This part of the IEC 62485 applies to secondary batteries and battery installations used for electric vehicles, e.g. in electric industrial trucks (including lift trucks, tow trucks, cleaning machines, automatic guided vehicles), in battery powered locomotives, in electric vehicles (e.g. goods vehicles, golf carts, bicycles, wheelchairs), and does not cover the design of such vehicles. This International Standard covers lead dioxide-lead (lead-acid), nickel oxide-cadmium, nickeloxide- metal hydride and other alkaline secondary batteries. Safety aspects of secondary lithium batteries in such applications will be covered in their own appropriate standards. The nominal voltages are limited to 1 000 V AC and 1 500 V DC respectively and describe the principal measures for protection against hazards generally from electricity, gas emission and electrolyte. It provides requirements on safety aspects associated with the installation, use, inspection, maintenance and disposal of batteries.

Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries

DIN EN 50342-4:2010 铅酸启动蓄电池.第4部分:重型车辆用电池的尺寸规格.德文版本EN 50342-4-2009

Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles; German version EN 50342-4:2009

IEC 62485-2:2010 蓄电池组和蓄电池装置安全性要求.第2部分:稳流蓄电池

This part of the IEC 62485 applies to stationary secondary batteries and battery installations with a maximum voltage of DC 1 500 V (nominal) and describes the principal measures for protections against hazards generated from: – electricity, – gas emission, – electrolyte. This International Standard provides requirements on safety aspects associated with the erection, use, inspection, maintenance and disposal. It covers lead-acid and NiCd / NiMH batteries. Examples for the main applications are: – telecommunications, – power station operation, – central emergency lighting and alarm systems, – uninterruptible power supplies, – stationary engine starting, – photovoltaic systems.

Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries

JIS C 8513:2010 锂电池的安全性

This Standard specifies test methods and requirements for primary lithium batteries to ensure their safe operation under the intended use and the reasonably foreseeable misuse.

Safety of primary lithium batteries

JIS C 8706:2010 固定式镍镉可再充电单电池

This Standard specifies the marking, characteristics and test methods of stationary nickel-cadmium rechargeable single cells for use in electric telecommunication, electric machinery and apparatus, emergency power supply, etc.

Stationary nickel-cadmium rechargeable single cells

JIS C 8712 ERRATUM 2:2010 勘误表

ERRATUM

SANS 60095-2:2010 铅酸起动蓄电池组．第2部分：蓄电池组尺寸和端子尺寸及标记

Applicable to lead-acid batteries used for starting, lighting and ignition of passenger cars and light vehicles with a nominal voltage of 12 V, which can be fastened to the vehicle by means of ledges around the container or by means of a hold-down device

Lead-acid starter batteries Part 2: Dimensions of batteries and dimensions and marking of terminals

SN/T 2502-2010 进出口危险品电池运输包装检验规程

本标准规定了进出口危险品电池运输包装检验的要求、抽样、样品预处理、检验鉴定及判定准则。 本标准适用于盛装容积不超过450 L、净重不超过400 kg、列入《关于危险货物运输建议书 规章范本》、以各种运输方式进出口的危险品电池运输包装容器的性能检验和使用鉴定。

Rules of the inspection of the transport package of import and export dangerous goods-Secondary cells and batteries

IEC 60335-2-29:2010 家用和类似用途电器.安全性.第2-29部分:蓄电池充电器的特殊要求

This International Standard deals with the safety of electric battery chargers for household and similar use having an output at safety extra-low voltage, their rated voltage being not more than 250 V. Battery chargers not intended for normal household use, but which nevertheless may be a source of danger to the public, such as battery chargers intended for use in garages, shops, light industry and on farms, are within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account

Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers

JB/T 10053-2010 铅酸蓄电池用水

本标准规定了铅酸蓄电池用水的要求、试验方法、检验规则、标志、包装、运输、贮存和使用。 本标准适用于铅酸蓄电池用水。

Water for lead-acid batteries

JB/T 9654-2010 铅酸蓄电池用固化管

本标准规定了铅酸蓄电池用固化管的定义、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于制造铅酸蓄电池管状正极板用的中碱玻璃纤维固化管。

Glass fiber tubes for lead-acid batteries

JB/T 8200-2010 煤矿防爆特殊型电源装置用铅酸蓄电池

本标准规定了防爆特殊型电源装置用铅酸蓄电池的产品品种和规格、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于煤矿蓄电池式电力机车用防爆特殊型电源装置中的铅酸蓄电池的检验之用。

Special explosion-proof lead-acid batterires for coal mine power source device

JB/T 10052-2010 铅酸蓄电池用电解液

本标准规定了铅酸蓄电池用电解液(含胶体电解液)要求、试验方法、检验规则、贮存与安全。 本标准适用于铅酸蓄电池用电解液。

Eletroyte for lead-acid storage batteries