K84 蓄电能装置 标准查询与下载

JB/T 8200-2010 煤矿防爆特殊型电源装置用铅酸蓄电池

本标准规定了防爆特殊型电源装置用铅酸蓄电池的产品品种和规格、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于煤矿蓄电池式电力机车用防爆特殊型电源装置中的铅酸蓄电池的检验之用。

Special explosion-proof lead-acid batterires for coal mine power source device

UL 2271-2010 轻型电动车(LEV)用安全电池

UL Standard for Safety Batteries for Use In Light Electric Vehicle (LEV) Applications (First Edition)

IEEE 485-2010 固定设施用酸性铅蓄电池尺寸测定推荐规程

Recommended practice for sizing lead-acid batteries for stationary applications

ANSI/IEEE 485:2010 固定设施用酸性铅蓄电池尺寸测定推荐规程

Methods for defining the dc load and for sizing a lead-acid battery to supply that load for stationary battery applications in full float operations are described. Some factors relating to cell selection are provided for consideration.

Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications

ANSI/ABYC A-31-2010 电池充电器和变流器

This standard is a guide for the design, construction, and installation of permanently installed marine alternating current (AC) battery chargers, power inverters and inverter chargers.

Battery Chargers and Inverters

ANSI/IEEE 450:2010 固定设施用铅酸蓄电池组的维护,试验及更换

This document provides recommended maintenance, test schedules, and testing procedures that can be used to optimize the life and performance of permanently-installed, vented lead-acid storage batteries used in standby service. It also provides guidance to determine when batteries should be replaced. This recommended practice is applicable to standby service stationary applications where a battery charger normally maintains the battery fully charged and provides the dc loads.

Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications

IEEE 450-2010 通气固定铅蓄电池组的维护,试验及更换实施规程

Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications

IEC 60335-2-29:2002/AMD2:2009 家用及类似用途电器.安全性.第2-29部分:电池充电器用详细要求.修改件2

This International Standard deals with the safety of electric battery chargers for household and similar use having an output at safety extra-low voltage@ their rated voltage being not more than 250 V. Battery chargers not intended for normal household use@ but which nevertheless may be a source of danger to the public@ such as battery chargers intended for use in garages@ shops@ light industry and on farms@ are within the scope of this standard. As far as is practicable@ this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However@ in general@ it does not take into account??C the use of appliances by young children or infirm persons without supervision;??C playing with the appliance by young children. NOTE 101 Attention is drawn to the fact that??C for appliances intended to be used in vehicles or on board ships or aircraft@ additional requirements may be necessary;??C in many countries additional requirements are specified by the national health authorities@ the national authorities responsible for the protection of labour and similar authorities. NOTE 102 This standard does not apply to??C built-in battery chargers@ except those for installing in caravans and similar vehicles;??C battery chargers that are part of an appliance@ the battery of which is not accessible to the user;??C battery chargers intended exclusively for industrial purposes;??C battery chargers intended to be used in locations where special conditions prevail@ such as the presence of a corrosive or explosive atmosphere (dust@ vapour or gas);??C battery chargers comprising more than one unit;??C supply units for electronic equipment;??C battery chargers and supply units for electronic flash apparatus for photographic purposes (IEC 60491);??C battery chargers intended for use in electric vehicles (IEC 61851). NOTE 103 Requirements for battery chargers for use by children at least 8 years old without supervision are given in Annex AA.

Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers; Amendment 2

KS C IEC 61982-1:2009 电动道路车辆驱动用蓄电池(非锂).性能和耐久试验

이 표준은 전기자동차의 추진동력으로 사용되는 단전지, 모노블록 및 모듈의 시험에 사용될 전

Secondary batteries for the propulsion of electric road vehicles－Part 1：Test parameters

IEC 60095-2:2009 铅酸起动蓄电池组.第2部分:蓄电池组尺寸和端子尺寸及标记

Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals

DIN EN 50342-3:2009 铅-酸起动器电池.第3部分:36 V标称电压电池的终端系统.德文版本EN 50342-3-2008

Lead-acid starter batteries - Part 3: Terminal system for batteries with 36 V nominal voltage; German version EN 50342-3:2008

BS EN 50342-4:2009 牵引用铅酸蓄电池组.第4部分:重型车辆用蓄电池组的尺寸规格

This European Standard is applicable to lead-acid batteries used for heavy vehicles. The object of this European Standard is to specify the European requirements of the main dimensions of starter batteries. For new and future developments of the above applications it is strongly recommended that only batteries from the “Preferred Types” series be used. Batteries of the series of “Other Types” exist under several national standards. They have been transferred from the previous standard EN 60095-4. The preferred types A, B and C are newly introduced and correspond closely to the types D4, D5 and D6 with some differences in tolerances and dimensions.

Lead-acid starter batteries — Part 4: Dimensions of batteries for heavy vehicles

SANS 2:2009 启动用铅酸蓄电池

Specifies the characteristics of lead-acid batteries of nominal voltage 12 V, commonly called "starter batteries". Used primarily as a power source for starting and igniting internal combustion engines, for lighting, and for auxiliary equipment of intern

Lead-acid starter batteries

SANS 61057:2009 带电作业中使用的带绝缘室的高架设备

Applicable to aerial devices (mobile elevating work platforms (MEWP)), with or without the possibility of an additional jib, as a minimum with an insulating upper boom (extending structure), used for live working on the nominal voltage, which is between

Aerial devices with insulating boom used for live working

GJB 6789-2009 空间用锂离子蓄电池通用规范

本规范规定了空间用锂离子蓄电池（以下简称“蓄电池”）的通用技术要求、质量保证规定及交货准备等。

General specification for lithium-ion rechargeable cells in spacecraft

GJB 2831A-2009 空间用全密封氢镍蓄电池通用规范

本规范规定了空间用全密封氢镍蓄电池的通用技术要求、质量保证规定及交货准备等。 本规范适用于独立压力容器及共用压力容器全密封氢镍蓄电池（以下简称“蓄电池”）。

General specification for hermetically sealed Nickel-Hydrogen rechargeable cells in spacecraft

BS EN 50342-3:2009 铅酸起动蓄电池组.标称电压36V电池用末端系统

Lead-acid starter batteries - Terminal system for batteries with 36 V nominal voltage

BS EN 50342-3:2008 铅酸起动蓄电池组.标称电压36V电池用末端系统

This European Standard is applicable to lead-acid batteries used for starting, lighting and ignition of passenger automobiles and light commercial vehicles with a nominal voltage of 36 V. This standard specifies the position, details of design and dimensions of a system of battery terminals. Starter batteries with 36 V nominal voltage may have the same dimensions and means for fixation as 6 V or 12 V batteries. This can be either intentional or unintentional. Therefore, the compatibility of batteries with 36 V nominal voltage down to electric power nets with 6 V or 12 V nominal voltage should be prevented. Such design of a 36 V termination and contacting system must prevent the case to be connected to a 6 V or 12 V power net in order to avoid serious damage in the 6 V or 12 V power net. For the same reason the design of the battery terminals must prevent that standard commercial jumper-cables may be contacted to the 36 V battery terminals if the battery is installed in the vehicle or not. A commercial application of this standard must expressively be agreed upon as the final standard may differ from the present draft.

Lead-acid starter batteries — Part 3: Terminal system for batteries with 36 V nominal voltage

JIS C 8941:2009 参考元件蓄电池

Secondary reference component cells

JIS C 8702-1:2009 小型阀调节的铅酸蓄电池组.第1部分:一般要求、功能特性.试验方法

This Standard specifies general requirements and functional characteristics togctber with the corresponding test methods of small-sized valve regulated lead-acid batteries which do not require water addition and are used for cyclic application, trickle application and float application (hereafter referred to as "batteries"). This Standard is also applicable to batteries of types specified in JIS C 8702-2. This Standard is not applicable to the batteries used for the following usages. -- Stationary lead-acid batteries specified in JIS C 8704 standards group -- Lead-acid starter batteries specified in JIS D 5301 -- Lead-acid traction batteries specified in JIS D 5303 standards group NOTE: The International Standard corresponding to this Standard is as follows. IEC 61056"1 : 2002 General purpose lead-acid batteries (valve-regulated types)- Part 1 : General requirements, functional characteristics -- Methods of test (MOD) In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standard and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/IEC Guide 21.

Small-sized valve regulated lead-acid batteries -- Part 1: General requirements, functional characteristics -- Methods of test