K84 蓄电能装置 标准查询与下载

IEC 60095-1:2006 启动用铅酸蓄电池.第1部分:一般要求和试验方法

This part of IEC 60095 is applicable to lead-acid batteries with a nominal voltage of 12 V, used primarily as a power source for the starting of internal combustion engines, lighting and for auxiliary equipment of internal combustion engine vehicles. These batteries are commonly called "starter batteries". This standard is not applicable to batteries for other purposes, such as the starting of railcar internal combustion engines. This standard specifies: – general requirements; – essential functional characteristics, relevant test methods and results required, for several classes of starter batteries – according to the general type of application; – according to the type of product.

Lead-acid starter batteries - Part 1: General requirements and methods of test

JIS C 8704-2-2:2006 固定式铅蓄电池.第2-2部分:阀门调节型.要求

この規格は，負荷及び直流電源に常に接続され，一般に定置状態で用し，る制御弁式据置鉛蓄電池(以下,蓄電池という。)の要求事項につし，て規定する。

Stationary lead-acid batteries -- Part 2-2: Valve regulated types -- Requirements

JIS C 8704-2-1:2006 固定式铅蓄电池.第2-1部分:阀门调节型.试验方法

この規格は，負荷及び直流電源に常に接続され，一般に，定置状態で用いる制御弁式据置鉛蓄電池(以下,蓄電池という。)の試験方法について規定する。

Stationary lead-acid batteries -- Part 2-1: Valve regulated types -- Methods of test

ANSI/IEEE 1184:2006 不可间断电源系统用电池的指南

Discusses various battery systems so that the user can make informed decisions on selection, installation design, installation, maintenance, and testing of stationary standby batteries used in Uninterruptible Power Supply (UPS) systems.

Guide for Batteries for Uninterruptible Power Supply Systems

IEC 61982-1:2006 电动道路车辆推进用蓄电池.第1部分:试验参数

This standard specifies the values of the various parameters such as voltage, current, power and temperature to be used in the testing of battery cells, monoblocs and modules used for the propulsion of electric road vehicles. The standard also defines certain test conditions and procedures. In its present form, the standard does not apply to high temperature batteries such as sodium/sulphur types.

Secondary batteries for the propulsion of electric road vehicles - Part 1: Test parameters

DIN EN 61951-1:2006 含有碱性或其他非酸性电解液的蓄电池和蓄电池组. 便携密封可再充电单电池. 第1部分. 镍镉电池（IEC 61951-1: 2003 + A1: 2005）; 德文版本EN 61951-1: 2003 + A1: 2006

This Part of IEC 61951 specifies marking designation, dimension, tests and requirements for portable sealed nickel-cadmium small prismatic, cylindrical and button rechargeable singe cells, suitable for use in any orientation.

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium (IEC 61951-1:2003 + A1:2005); German version EN 61951-1:2003 + A1:2006

JIS C 8704-1:2006 固定铅酸蓄电池.一般要求和试验方法.第1部分:透气式

この規格は，負荷又は直流電源に常に接続するペント形据層鉛蓄電池(以下,蓄電池という。)の一般的要求事項並びに主要特性及びその試験方法について規定する。

Stationary lead-acid batteries -- General requirements and methods of tests -- Part 1: Vented types

NF R13-503-1:2006 酸性铅起动电池组.第1部分:一般要求和试验方法

Lead-acid starter batteries - Part 1 : general requirements and methods of test.

BS EN 50342-1:2006+A1:2011 铅酸起动蓄电池组.一般要求和试验方法

Lead-acid starter batteries. General requirements and methods of test

BS EN 50342-1:2006 铅酸起动蓄电池组.一般要求和试验方法

This standard is applicable to lead-acid batteries with a nominal voltage of 12 V, used primarily as a power source for the starting of internal combustion engines, lighting and also for auxiliary equipment of internal combustion engine vehicles. These batteries are commonly called "starter batteries". Batteries with a nominal voltage of 6 V are also included within the scope of this standard. All referenced voltages have to be divided by two for 6 V batteries. This standard is applicable to batteries for the following purposes: ? batteries for passenger cars, ? batteries for commercial and industrial vehicles for normal use, ? batteries for commercial and industrial vehicles for severe use. This standard is not applicable to batteries for other purposes, for example the starting of railcar internal combustion engines.

Lead-acid starter batteries - Part 1: General requirements and methods of test

KS C IEC 61436:2006 含有碱或者其他非酸性电解液的二次电池组和蓄电池组.密封式镍金属氢化物可再充电单电池组

이 규격은 어떠한 사용 목적을 위하여 적당한 밀폐형 충전용 Ni/MH 단전지의 시험과 요구

Sealed nickel-metal hydride rechargeable single cells

NF C58-651-1/A1:2006 含有碱性或其它非酸性电解质的二次电池和蓄电池.便携式密封可再充电单电池.第1部分:镍镉

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1 : nickel-cadmium.

IEEE 1106/COR-2006 固定设施用通气镍镉蓄电池组安装,维修,测试和更换的推荐实施规程

Errata to IEEE Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications

Recommended practice for installation, maintenance, testing, and replacement of vented nickel-cadmium batteries for stationary applications

IEEE 1184-2006 不间断电力系统用蓄电池

Discusses various battery systems so that the user can make informed decisions on selection, installation design, installation, maintenance, and testing of stationary standby batteries used in Uninterruptible Power Supply (UPS) systems.

Guide for Batteries for Uninterruptible Power Supply Systems

IEEE 1725-2006 移动电话用可再充电电池

This standard establishes criteria for design analysis for quality, and establishes criteria for reliability of rechargeable Li-Ion and Li-Ion Polymer batteries for mobile telephone applications. Also included in the standard are battery pack electrical and mechanical construction, packaging technologies, pack and cell level charge and discharge controls, and overall system considerations

IEEE Standard for Rechargeable Batteries for Cellular Telephones

QC/T 743-2006 电动汽车用锂离子蓄电池

本标准规定了电动汽车用锂电子蓄电池（以下简称蓄电池）的要求、试验方法、检验规则、标志、包装、运输和储存。 本标准适用于电动汽车用标称电压单体3.6V和模块n×3.6V(n为蓄电池数量）的锂电子蓄电池。

Lithium--ion batteries for electric vehicles

QC/T 742-2006 电动汽车用铅酸蓄电池

本标准规定了电动汽车用铅酸蓄电池（以下简称蓄电池）的要求、试验方法、检验规则、标志、包装、运输和储存。 本标准适用于电动汽车用铅酸蓄电池。

Lead--acid batteries for electric vehicles

QC/T 744-2006 电动汽车用金属氢化物镍蓄电池

本标准规定了电动汽车用密封金属氢化物镍蓄电池（以下简称蓄电池）的要求、试验方法、检验规则、标志、包装、运输和储存。 本标准适用于电动汽车用标称电压1.2V和模块n×1.2V(n为蓄电池数量，n≥5）的密封金属氢化物镍蓄电池。

Nickel--metal hydride batteries for electric vehicles

DIN EN 60896-11 Berichtigung 1:2006 固定式铅酸蓄电池组.第11部分:开孔透气型.一般要求和试验方法(IEC 60896-11-2002).DIN EN 60896-11-2003的勘误

Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of test; (IEC 60896-11:2002); German version EN 60896-11:2003, Corrigenda to DIN EN 60896-11:2003-07

JIS C 8705:2006 密封可再充电式镍镉单电池

この規格は，小形角形，円筒形及びポタン形の密閉形ニッケル·カドミウム蓄電池(以下,電池という。)の試験方法及び要求事項について規定する。

Sealed nickel-cadmium rechargeable single cells