K84 蓄电能装置 标准查询与下载

JIS C 8711:2006 包括碱性或其他非酸性电解液的二次电池和蓄电池.便携设备用二次锂电池和蓄电池

この規格は，ポータブル機器用のリチウム二次電池の単電池及び組電池における性能試験，呼び方，表示，寸法及びその他の要求事項について規定する。

Secondary cells and batteries containing alkaline or other non-acid electrolytes -- Secondary lithium cells and batteries for portable applications

JIS C 8712:2006 便携设备用便携式密封二次电池及由其制成的蓄电池的安全要求

この規格は，ポータブル機器用に使用するニッケル・力ドミウム蓄電池，ニッケル·水素蓄電池及びリチウム二次電池の単電池並びに組電池の通常使用時及び予見可能な誤使用時における安全な作動の要求事項及び試験方法について規定する。

Safety requirements for portable sealed secondary cells, and batteries made from them, for use in portable applications

JIS C 8713:2006 包括碱性或其他非酸性电解液的二次电池和蓄电池.密封便携式二次电池和蓄电池的机械试验

この規格は。密閉形小形二次電池及び組電池の取扱い，並びに通常の使用における機械的特性を確認するための試験及びその要件について規定する。

Secondary cells and batteries containing alkaline or other non-acid electrolytes -- Mechanical tests for sealed portable secondary cells and batteries

ANSI/IEEE 1188:2005 固定设备用的阀调节铅酸蓄电池的维修、试验和更换的推荐实施规程

Describes recommended maintenance and testing schedules, and testing procedures to optimize the life and performance of valve-regulated lead-acid (VRLA) batteries for stationary applications. Also provides guidance to determine when batteries should be replaced.

Recommended Practice for Maintenance, Testing and Replacement of Valve Regulated Lead-Acid Batteries for Stationary Applications

NF C63-975-1:2006 电动车辆充电系统.第1部分:一般要求

Electric vehicle conductive charging system - Part 1 : general requirements.

SJ 20941-2005 锂离子蓄电池通用规范

本规范规定了军用锂离子单体蓄电池的共性要求、质量保证规定和交货准备。 本规范适用于8Ah以下的小容量军用锂离子单体蓄电池（以下简称“电池”），大容量锂离子单体蓄电池可参照使用。

General specification for li-ion rechargeable cell

IEC 61951-1:2006 含碱性或其它非酸性电解质的二次电池和蓄电池组.便携式密封可再充电单电池.第1部分:镍镉电池

This part of IEC 61951 specifies marking, designation, dimensions, tests and requirements for portable sealed nickel-cadmium small prismatic, cylindrical and button rechargeable single cells, suitable for use in any orientation.

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium

DIN EN 60254-1:2006 车用铅酸蓄电池.第1部分:一般要求和试验方法

This part of IEC 60254 is applicable to lead-acid traction batteries used as power sources for electric propulsion. The tests defined are relevant to all traction battery applications which include road vehicles, locomotives, industrial trucks and mechanical handling equipments. Tests which may be used specifically to test batteries developed for use in vehicles such as light passenger vehicles, motor cycles, light commercial vehicles, etc., may be found in alternative standards.

Lead-acid traction batteries - Part 1: General requirements and methods of tests (IEC 60254-1:2005); German version EN 60254-1:2005

ANSI/UL 583-2006 工业用蓄电池电力卡车标准

Addition of a reduced spacings alternative to the current requirements in UL 583.

Standard for Electric-Battery-Powered Industrial Trucks

IEEE 535-2006 核能发电站1E类铅蓄电池的资格证明

Describes qualification methods for Class 1E vented lead acid batteries and racks to be used in nuclear power generating stations outside primary containment.

Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations

GJB 1876A-2005 锌银储备电池组通用规范

本规范规定了锌银贮备电池组的要求、质量保证规定和交货准备等。 本规范适用于电加热、化学加热和不需加热的自动激活锌银贮备电池组(以下简称电池组)。

General specification for silver zinc reserve batteries

SANS 60254-1:2005 铅酸牵引电池组．第1部分：一般要求和试验方法

Applies to lead-acid traction batteries used as power sources for electric propulsion. Intends to specify certain essential characteristics of traction batteries or cells, together with the relevant test methods of those characteristics.

Lead-acid traction batteries Part 1: General requirements and methods of test

NF C58-272-2:2005 二次蓄电池和电池装置的安全要求.第2部分:固定电池组

Safety requirements for secondary batteries and battery installations - Part 2 : Stationary batteries.

IEEE 1491/COR-2005 固定设施用蓄电池监测设备的选择和使用

Maintaining a fully operational battery system. This guide presents and discusses measurable parameters of lead-acid and nickel-cadmium batteries as used in stationary battery systems and the utilization of such observations

Selection and use of battery monitoring equipment in stationary applications

KS C 8056-3-2005 小型铅酸蓄电池.第3部分:电器使用安全要求

이 규격은 물 보충을 필요로 하지 않는 사이클 서비스용 소형 밀폐형 납 축전지 및 트리클

Small-sized sealed lead-acid batteries(Valve regulated types)-Part 3:Safety recommendations for use in electric appliances

KS C 8056-1-2005 小型铅酸蓄电池.第1部分:通用要求、功能特性和试验方法

이 규격은 물 보충을 필요로 하지 않는 사이클 서비스용 소형 밀폐형 납 축전지 및 트리클

Small-sized sealed lead-acid batteries(Valve regulated types)－Part 1：General requirements, functional characteristics-Methods of test

KS C 8503-2005 二氧化锰锂原电池

이 규격은 리튬을 부극 작용 물질, 이산화망간을 정극 작용 물질, 비수 전해액을 전해액으로

Manganese dioxide lithium primary cells and batteries

KS C 8056-2-2005 小型铅酸蓄电池.第2部分:尺寸、端子和标志

이 규격은 물 보충을 필요로 하지 않는 사이클 서비스용 소형 밀폐형 납 축전지 및 트리클

Small-sized sealed lead-acid batteries(Valve regulated types)－Part 2：Dimensions, terminals and marking

BS EN 61959:2004 含碱性或其他非酸性电解质的二次电池和蓄电池.密封的便携式二次电池和蓄电池的机械试验

This Intermational standard soecifies tests and requirements for verifying the mechanical behaviour of sealed portable secondary cells and batteries during handing and normal use. Relevant national and International standards have been taken into consideration. This standard provides test objectives, methods of tests and acceptance criteria relevant to sealed portable secondary cells and batteries of different electrochemical systems(Ni-Cd,Ni-MH and Lithium) size and shapes (cylindrical, prismatic and button).

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries

IEC 61951-1/AMD1:2005 含碱性或其它非酸性电解质的二次电池和蓄电池.便携式密封可再充电单个电池.第1部分:镍镉电池.修改件1

This standard is Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium; Amendment 1.

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium; Amendment 1