K84 蓄电能装置 标准查询与下载

CSA C191-04-2004 家用蓄能电热水器性能.第4版

This Standard specifies requirements related to delivery, minimum standby performance, heater element ratings, and marking of electric storage tank water heaters.

Performance of electric storage tank water heaters for domestic hot water service Fourth Edition

SN/T 1414.1-2004 进出口蓄电池安全检验方法 第1部分:通用要求

SN/T 1414的本部分规定了进出口蓄电池安全性能的检验方法和要求，用以保证蓄电池在正常使用以及合理的、可以预见的误用情况下安全工作。 本部分适用于进出口蓄电池的安全检验。

Safety inspection of import and export secodary cells and batteries--Part 1: General

SANS 61044:2004 牵引用铅酸蓄电池的中间充电

Covers the opportunity charging of lead-acid batteries, i.e. the use of free time during a working period to top up the charge and thus extend the working day of a battery whilst avoiding excessive discharge.The standard gives basic rules and precautions for the use of opportunity-charging of lead-acid traction batteries of vented and valve-regulated types, when the battery manufacturer has not recommended the required operating procedures.

Opportunity charging of lead-acid traction batteries

JIS D 5303-1:2004 铅酸牵引蓄电池.第1部分:一般要求和试验方法

この規格は，フオークリフトトラック，けん引車，運搬車，機関車などの電気車の動力の電源として使用する電気車用鉛蓄電池(以下，蓄電池という。)の性能及び試験方法について規定する。

Lead-acid traction batteries -- Part 1: General requirements and methods of test

JIS C 8708:2004 密封的镍金属氢化物可充电单电池

Sealed nickel-metal hydride rechargeable single cells

JIS D 5303-2:2004 铅酸牵引蓄电池.第2部分:电池尺寸和电池电极的终端和标志

この規格は，フオークリフトトラック，けん引車，運搬車，機関車などの電気車の動力の電源として使用する電気車用鉛蓄電池(以下，蓄電池という。)の次の項目について規定する。

Lead-acid traction batteries -- Part 2: Dimensions of cells and terminals and marking of polarity on cells

EN 61959:2004 含碱性或其它非酸性电解液的副电池和蓄电池.密封的便携式二次电池和蓄电池的机械试验 IEC 61959:2004;部分替代 EN 61960-1:2001& EN 61960-2:2001;合并勘误表

This International standard specifies tests and requirements for verifying the mechanical behaviour of sealed portable secondary cells and batteries during handling and normal use. Relevant national and International standards have been taken into consideration. This standard provides test objectives, methods of tests and acceptance criteria relevant to sealed portable secondary cells and batteries of different electrochemical systems (Ni-Cd, Ni-MH and Lithium) sizes and shapes (cylindrical, prismatic and button).

Secondary cells and batteries containing alkaline or other non-acid electrolytes Mechanical tests for sealed portable secondary cells and batteries (Incorporating Corrigendum June 2004)

IEEE 450/COR-2004 固定应用的通气式铅酸蓄电池的维护、试验和替换规程.勘误

Errata to IEEE Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications

Practice for maintenance, testing, and replacement of vented lead-acid batteries for stationary applications; Errata

BS EN 62259:2004 含碱性或其他非酸性电解质的蓄电池和蓄电池组.部分气体复合的镍镉柱状二次单电池

This International Standard specifies marking, designation, dimensions, tests and require-ments for vented nickel-cadmium prismatic secondary single cells where special provisions have been made in order to have partial or, under very specific conditions, full gas recombination. NOTE In this context, "prismatic" refers to cells having rectangular sides and base. When there exists an IEC standard specifying test conditions and requirements for cells used in special applications and which is in conflict with this standard, the former shall take precedence.

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination

JB/T 6457.1-2004 小型阀控密封式铅酸蓄电池.第1部分:产品分类

JB/T 6457的本部分规定了小型阀控密封式铅酸蓄电池的型号编制、结构尺寸、端子位置、规格及外形尺寸。 本部分适用于应急照明设备、不间断电源、移动测量设备等，额定容量在65Ah(含65Ah)以下的各种直流电源用蓄电池。这类铅酸蓄电池组的单体电池，可以是平板电极装在方形槽中的，也可以是卷绕式电极装在圆筒中的。蓄电池中的硫酸电解液是不流动的，或吸附在电极间微孔结构中或呈胶体状态。

Small-sized valve-regulated lead-acid batteries Part 1:Product classification

JB/T 6457.2-2004 小型阀控密封式铅酸蓄电池.第2部分:技术条件

本部分规定了小型阀控密封式铅酸蓄的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本部分适用于应急照明设备、不间断电源、移动测量设备等，额定容量在65Ah(含65Ah)以下的各种直流电源用蓄电池。这类铜酸蓄电池组的单体电池，可以是平板电极装在方形槽中的，也可以是卷绕式电极装在圆筒中的。蓄电池中的硫酸电解液是不流动的，或吸附在电极间微孔结构中或呈胶体状态。

Small-sized valve-regulated lead-acid batteries Part 2:Technical conditions

IEC 60896-21:2004 固定式铅酸蓄电池组.第21部分:阀调整型.试验方法

This part of IEC 60896 applies to all stationary lead-acid cells and monobloc batteries of the valve regulated type for float charge applications, (i.e. permanently connected to a load and to a d.c. power supply), in a static location (i.e. not generally

Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test

IEC 60896-22:2004 固定式铅酸蓄电池组.第22部分:阀调整型.要求

This part of IEC 60896 applies to all stationary lead-acid cells and monobloc batteries of the valve regulated type for float charge applications, (i.e. permanently connected to a load and to a d.c. power supply), in a static location (i.e. not generally

Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements

NF C58-633:2004 含碱性或其它非酸性电解质的蓄电池和蓄电池组.便携式设备用便携式封装蓄电池和由它们组成的蓄电池组的安全要求

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications.

IEC 61959:2004 含碱性或其它非酸性电解质的蓄电池和蓄电池组.密封的便携式蓄电池和蓄电池组的机械试验

This International standard specifies tests and requirements for verifying the mechanical behaviour of sealed portable secondary cells and batteries during handling and normal use.

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries

UL SUBJECT 2265A-2004 原始设备制造商的信息技术设备用使用一次性甲醇的手持式和可手移动式燃料电池电源装置调查大纲.发布编号:1

This standard is specified OUTLINE OF INVESTIGATION FOR HAND-HELD OR HAND-TRANSPORTABLE FUEL CELL POWER UNITS WITH DISPOSABLE METHANOL FUEL CARTRIDGES FOR USE IN ORIGINAL EQUIPMENT MANUFACTURER S INFORMATION TECHNOLOGY EQUIPMENT Issue Number 1 .

OUTLINE OF INVESTIGATION FOR HAND-HELD OR HAND-TRANSPORTABLE FUEL CELL POWER UNITS WITH DISPOSABLE METHANOL FUEL CARTRIDGES FOR USE IN ORIGINAL EQUIPMENT MANUFACTURER S INFORMATION TECHNOLOGY EQUIPMENT Issue Number 1

IEEE 1625-2004 便携式计算机用可再充电电池标准

Guidance for the designer/manufacturer/supplier in planning and implementing controls for the design and manufacture of lithium-ion (Li-ion) and lithium-ion polymer (Li-ion polymer) rechargeable battery packs used for portable computing is provided. This standard's provisions work together, and they define approaches to design, test, and evaluate a cell, battery pack, and host device to mitigate battery system failure in user environments. Additionally, this standard provides recommendations for end-user education and communication materials. This approach suggests the interfaces between subsystems (e.g., cell, battery pack, host device) and end users are as important to system reliability as is robust subsystem design and testing. This standard therefore includes subsystem interface design responsibilities for each subsystem designer/manufacturer/supplier, and it provides messaging and communication provisions for end-user.

Standard for rechargeable batteries for portable computing

ANSI/CSA AmericaFC 1-2004 固定燃料电池动力装置

This standard covers the safe operation, substantial and durable construction, and acceptable performance of packaged stationary fuel cell power systems, which through electrochemical reactions and other processes, generate alternating-current or direct-current electricity. This standard applies to fuel cell power systems not exceeding a power output of 10 MW and that are for use with hydrogen gas, gaseous or liquid hydrocarbon fuel, or zinc particulate conveyed in a non-flammable liquid medium.

Stationary Fuel Cell Power Systems

NF C58-651-1:2003 含碱性或其它非酸性电解质的二次电池和蓄电池组.便携式密封可再充电单电池.第1部分:镍镉电池

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1 : nickel-cadmium.

IEC 61960:2003 含碱性或其它非酸性电解质的蓄电池和畜电池组.便携式锂蓄电池和蓄电池组

This International Standard specifies performance tests, designations, markings, dimensions and other requirements for secondary lithium single cells and batteries for portable applications. The objective of this standard is to provide the purchasers and

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications