L10 电子元件综合 标准查询与下载

KS C IEC 60512-15-8:2004 电子设备用机电元件.基本试验程序和测量方法.第15部分:接触件及引出端机械试验.第8节:试验15h:接触件固定结构耐工刀具使用性

이 규격에서는 접촉자의 삽입과 추출을 위한 표준화된 도구의 사용을 견디어 내는 커넥터의

Electromechanical component for electronic equipment-Basic testing procedures and measuring methods-Part 15:Mechanical tests on contacts and terminations-Section 8:Test 15h-Contact retention system resistance to tool application

KS C IEC 60512-20-2:2004 电子设备用电机元件.基本试验程序和测量方法.第20-2部分:试验20b.易燃试验.耐火性

이 규격에서 정의하고 있는 세부 명세에 따른 시험은 IEC TC 48의 업무 범위 내에

Electromechanical components for electronic equipment-Basic testing procedures and measuring methods- Part 20-2:Test 20b-Flammability tests-Fireproofness

KS C IEC 60512-2:2004 电子设备用机电元件.基本试验规程和测量方法.第2部分:一般检查、电连续性和接触电阻试验、绝缘试验和电压应力试验

이 규격에 포함된 시험은 세부 명세에 의해 요구될 때 TC 48*의 업무 범위 내에서

Electromechanical components for electronic eqipment-Basic testing procedures and measuring methods-Part 2:General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests

DLA SMD-5962-96898 REV A-2004 28伏特单通道直流电到直流电转换器硅单片电路混合线型微电路

This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of radiation hardness assurance levels are reflected in the PIN.

MICROCIRCUIT, HYBRID, LINEAR, 28-VOLT, SINGLE CHANNEL, DC-DC CONVERTER

KS C IEC 60512-11-14:2004 电子设备用机电元件.基本试验程序和测量方法.第11-14部分:气候试验.试验11p:流动单气体腐蚀试验

KS C IEC 60512-11-14에서 정의하고 있는 세부 명세에 따른 시험은 IEC

Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 11:Climatic tests-Section 14:Test 11p-Flowing single gas corrosion test

KS C IEC 60512-11-7:2004 电子设备用机电元件.基本试验程序和测量方法.第11-7部分:气候试验.试验11g:流动混合气体腐蚀试验

이 규격은 전자 기기용 전기 기계 부품이 매우 낮은 농도의 혼합 가스에 의해 오염된 분

Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 11:Climatic tests-Section 7:Test 11g:Flowing mixed gas corrosion test

DLA SMD-5962-96735 REV B-2004 11.8伏特同步与门数字转换器混合线型微电路

This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of radiation hardness assurance levels are reflected in the PIN.

MICROCIRCUIT, HYBRID, LINEAR, 11.8-VOLT, SYNCHRO AND RESOLVER TO DIGITAL CONVERTER

DLA SMD-5962-96844 REV B-2004 90伏特同步到数字转换器混合线型微电路

This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of radiation hardness assurance levels are reflected in the PIN.

MICROCIRCUIT, HYBRID, LINEAR, 90 VOLT, SYNCHRO TO DIGITAL CONVERTER

BS EN 61360-5:2004 电气元件标准数据元类型和相关分类模式.EXPRESS词典模式的扩展

The scope of this part of IEC 61360 is the extension of the common ISO/IEC dictionary schema for the definition of concepts which are used in IEC 61360-1 but which are not addressed by the information models specified in IEC 61360-2. The object of this standard is to provide a formal model for data according to the scope as given above, and thus to provide, with IEC 61360-2, a means for the computer-sensible representation and exchange of all data which comply with IEC 61360-1. The common ISO/IEC dictionary schema as defined in IEC 61360-2 is the common ISO/IEC dictionary schema based on the intersection of the scopes of the two base standards: · IEC 61360-1; · ISO 13584-42. and facilitates a harmonization of both. Quotation of a relevant part from the scope and object of IEC 61360-1: This part of IEC 61360 provides a firm basis for the clear and unambiguous definition of characteristic properties (data element types) of all elements of electrotechnical systems from basic components to subassemblies and full systems. Although originally conceived in the context of providing a basis for the exchange of information on electric/electronic components, the principles and methods of this standard may be used in areas outside the original conception such as assemblies of components and electrotechnical systems and subsystems Quotation of a relevant part from the introduction of ISO 13584-42: This part of ISO 13584 provides rules and guidelines for library data suppliers to create hierarchies of families of parts according to a common methodology intended to enable multi-supplier consistency. These rules pertain to the following: the method for grouping parts into families of parts to form a hierarchy; the dictionary elements that describe the families and properties of parts. IEC 61360-2 provides a common information model for the work of both committees, thus allowing for the implementation of dictionary systems dealing with data delivered according to either of the standards elaborated by both committees. This part of IEC 61360 provides a Library Integrated Information Model (liim) that, with resources from IEC 61360-2, ISO 13584 and ISO 10303, allows modelling and exchanging dictionary information compliant with IEC 61360-1.

Standard data element types with associated classification scheme for electric components - Extensions to the EXPRESS dictionary schema

ECA EIA-364-62A-2004 TP-62A 电子连接器和插座的终端强度试验规程

This standard establishes test methods to determine the ability of the terminals of an electrical connector to withstand the mechanical stresses likely to be applied during normal assembly operations. This test method is limited to standard flat type thro

TP-62A Terminal Strength Test Procedure for Electrical Connectors, and Sockets

KS C 6491-2004 电子设备用可变电容器通则

이 규격은 전자 기기용 가변 커패시터(이하 커패시터라 한다.)의 형명, 정격, 구조,

General rules of variable capacitors for electronics equipment

KS C 6490-2004 电子设备用A类调谐可变电容器通则

이 규격은 KS C 6491을 기본으로 하여 전자 기기용 가변 커패시터(형식A 커패시터

General rules of variable tuning capacitors(type A) for electronic equipment

KS C 6492-2004 电子设备用可变电容器试验法

이 규격은 주로 전자 기기에 사용되는 가변 커패시터(이하 커패시터라 한다.)의 시험 방

Test methods of variable capacitors for electronic equipment

KS C 6403-2004 电子设备用固定电容器通则

이 규격은 주로 전자 기기에 사용하는 고정 커패시터(이하 커패시터라 한다.)의 공통적

General rules of fixed capacitors for use in electronic equipment

DLA DSCC-DWG-04002-2004 密封混合,聚合物情况下的钽电容器

This drawing describes the specific electrical, mechanical, and environmental requirements for polymer cased hybrid capacitors.

CAPACITORS, TANTALUM, HYBRID, POLYMER CASE, SEALED

DLA MIL-HDBK-1131 A-2004 铝电解固定电容器上架贮存期限和重整程序

This handbook provides guidance in determining and prolonging the serviceability of aluminum electrolytic fixed capacitors during storage. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.

STORAGE SHELF LIFE AND REFORMING PROCEDURES FOR ALUMINUM ELECTROLYTIC FIXED CAPACITORS

DLA MIL-PRF-49464 B-2004 有可靠性指标的单层片式瓷介电容器总规范

This specification covers the general requirements for ceramic plate, single layer capacitors. These capacitors are intended for stripline or microstrip applications, usually at frequencies of 1 GHz and higher. Capacitors covered by this specification have failure rate levels (FRL) ranging from 1.0 to 0.001 percent per 1,000 hours. These failure rate levels are established at a 90-percent confidence level and maintained at a 10-percent producer’s risk. They are based on life tests performed at a maximum rated voltage at maximum rated temperature. An acceleration factor of 8:1 has been used to relate life test data obtained at 200 percent of rated voltage at maximum rated temperature, to rated voltage at rated temperature. Stat stical Process Control (SPC) techniques are required in the manufacturing process to minimize variation in production of capacitors supplied to the requirements of this specification.

CAPACITORS, CHIP, SINGLE LAYER, FIXED, PARALLEL PLATE, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

DLA SMD-5962-88517 REV C-2004 14位数位类比转换器混合动力线性微电路

This drawing describes device requirements for class H hybrid microcircuits to be processed in accordance with MIL-PRF-38534 and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN).

MICROCIRCUIT, HYBRID, LINEAR, 14-BIT, DIGITAL TO ANALOG CONVERTER

DLA MIL-PRF-21038 F-2004 低功率 脉冲转换器 常规

This specification covers the general requirements for low-power pulse transformers

TRANSFORMERS, PULSE, LOW POWER GENERAL SPECIFICATION FOR

DLA SMD-5962-95648 REV B-2004 混合双频道的加或减12伏特直流电和交流电转换器线型微电路

This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of radiation hardness assurance levels are reflected in the PIN.

MICROCIRCUIT, HYBRID, LINEAR, PLUS/MINUS 12 VOLT, DUAL CHANNEL, DC/DC CONVERTER