L11 电容器 标准查询与下载

DIN EN 60384-8:2015 电子设备用固定电容器.第8部分:分规范.1类陶瓷介质固定电容器(IEC 60384-8-2015);德文版本EN 60384-8-2015

Fixed capacitors for use in electronic equipment - Part 8: Sectional specification - Fixed capacitors of ceramic dielectric, Class 1 (IEC 60384-8:2015); German version EN 60384-8:2015

DIN EN 60384-9:2015 电子设备用固定电容器.第9部分:分规范.2类陶瓷介质固定电容器(IEC 60384-9-2015);德文版本EN 60384-9-2015

Fixed capacitors for use in electronic equipment - Part 9: Sectional specification - Fixed capacitors of ceramic dielectric, Class 2 (IEC 60384-9:2015); German version EN 60384-9:2015

DIN EN 60871-4:2015 额定电压1000V以上交流电力系统并联电容器.第4部分:内部熔丝 (IEC 60871-4-2014);德文版本EN 60871-4-2014

Shunt capacitors for AC power systems having a rated voltage above 1 000 V - Part 4: Internal fuses (IEC 60871-4:2014); German version EN 60871-4:2014

DIN EN 60358-3:2015 耦合电容器及电容分压器. 第3部分:谐波过滤器应用交流或直流电耦合电容器(IEC 60358-3-2013);德文版本EN 60358-3-2014

Coupling capacitors and capacitor dividers - Part 3: AC or DC coupling capacitors for harmonic-filters applications (IEC 60358-3:2013); German version EN 60358-3:2014

BS EN 60143-3:2015 电力系统串联电容器.内部熔断器

Series capacitors for power systems. Internal fuses

BS EN 60384-24:2015 电子设备用固定电容器.分规范.带传导聚合固体电解质的表面安装固定钽电解电容器

Fixed capacitors for use in electronic equipment. Sectional specification. Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte

BS EN 60384-20:2015 电子设备用固定电容器.分规范.金属化聚苯撑硫薄膜电介质表面安装直流(d.c.)固定电容器

Fixed capacitors for use in electronic equipment. Sectional specification. Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors

BS EN 60384-25:2015 电子设备用固定电容器.分规范.带导电聚合固体电解质的表面安装固定铝电解电容器

Fixed capacitors for use in electronic equipment. Sectional specification. Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte

IEC 62391-1:2015 电气和电子设备用双层固定电容器.第1部分:通用规范

This part of IEC 62391 applies to fixed electric double-layer capacitors (hereafter referred to as capacitor(s)) mainly used in d.c. circuits of electric and electronic equipment. This part of IEC 62391 establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose.

Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification

NF C83-112-200*NF EN 130200:2015 分规格: 带非固态或固态电解质的固定钽电容器

Sectional specification : fixed tantalum capacitors with non-solid or solid electrolyte

IEC 60384-20:2015 电子设备用固定电容器.第20部分:分规范.金属化聚苯硫醚膜介质直流片式固定电容器

"This part of IEC 60384 applies to fixed surface mount capacitors for direct current@ with metallized electrodes and polyphenylene sulfide dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto substrates for hybrid circuits or onto printed boards. They may have ""self-healing properties"" depending on conditions of use and are primarily intended for applications where the a.c. component is small with respect to the rated voltage. These capacitors are divided to 3 grades. Performance grade 1 for long life@ performance grade 2 for general purpose and performance grade 3 for miniature type. Capacitors for radio interference suppression are not included@ but are covered by IEC 60384-14. Capacitors used for motor or fluorescent lamp are outside the scope of this standard."

Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors

IEC 60384-24:2015 电子设备用固定电容器.第24部分:分规范.采用导电聚合固体电解质的表面安装固钽电解电容器

This part of IEC 60384 applies to fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte primarily intended for d.c. applications for use in electronic equipment. Fixed tantalum electrolytic surface mount capacitors with solid (MnO2) electrolyte are not included but are covered by IEC 60384-3. These capacitors are primarily intended for use in electronic equipment to be mounted directly on substrates for hybrid circuits or to printed boards. Capacitors for special-purpose applications may need additional requirements.

Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte

IEC 60384-25:2015 电子设备用固定电容器.第25部分:分规范.采用导电聚合固体电解质的表面安装固定铝电解电容器

Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte

BS EN 60384-23:2015 电子设备用固定电容器.分规范.表面安装的金属化聚乙烯苯二甲酸盐膜介质直流(DC)固定电容器

Fixed capacitors for use in electronic equipment. Sectional specification. Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors

IEC 60143-1:2015 电力系统用串联电容器.第1部分:总则

This part of IEC 60143 applies both to capacitor units and capacitor banks intended to be used connected in series with an a.c. transmission or distribution line or circuit forming part of an a.c. power system having a frequency of 15 Hz to 60 Hz. The primary focus of this standard is on transmission application. The series capacitor units and banks are usually intended for high-voltage power systems. This standard is applicable to the complete voltage range. This standard does not apply to capacitors of the self-healing metallized dielectric type. The following capacitors, even if connected in series with a circuit, are excluded from this standard: capacitors for inductive heat-generating plants (IEC 60110-1); capacitors for motor applications and the like (IEC 60252 (all parts)); capacitors to be used in power electronics circuits (IEC 61071); capacitors for discharge lamps (IEC 61048 and IEC 61049). For standard types of accessories such as insulators, switches, instrument transformers, external fuses, etc. see the pertinent IEC standard. NOTE 1 Additional requirements for capacitors to be protected by internal fuses, as well as the requirements for internal fuses, are found in IEC 60143-3. See also Annex C. NOTE 2 Additional requirements for capacitors to be protected by external fuses, as well as the requirements for external fuses, are found in Annex A and Annex C. NOTE 3 A separate standard for series capacitor accessories (spark-gaps, varistors, discharge reactors, current- limiting damping reactors, damping resistors, circuit-breakers, etc.), IEC 60143-2, has been revised and was completed in 2012. A separate standard for internal fuses for series capacitors, IEC 60143-3 has been revised and was completed in 2013. NOTE 4 Some information regarding fuseless capacitor units and fuseless capacitor banks is found in Annex C. The object of this standard is; to formulate uniform rules regarding performance, testing and rating; to formulate specific safety rules; to serve as a guide for installation and operation.

Series capacitors for power systems - Part 1: General

IEC TS 60871-3:2015 额定电压1000V以上交流电力系统用并联电容器 第3部分:并联电容器和并联电容器组的保护

This part of IEC 60871, which is a technical specification, gives guidance on the protection of shunt capacitors and shunt capacitor banks. it applies to capacitors according to IEC 60871- 1.

Shunt capacitors for AC power systems having a rated voltage above 1000 V - Part 3: Protection of shunt capacitors and shunt capacitor banks

BS EN 60384-9:2015 用于电子设备的固定电容器 截面规格：陶瓷电介质固定电容器 2 级

Fixed capacitors for use in electronic equipment. Sectional specification: Fixed capacitors of ceramic dielectric, Class 2

BS EN 60384-8:2015 电子设备用固定电容器.第8部分:分规范:1级陶瓷介电固定电容器

Fixed capacitors for use in electronic equipment. Sectional specification: Fixed capacitors of ceramic dielectric, Class 1

DIN EN 60871-1:2015 额定电压1kV以上交流电力系统的并联电容器.第1部分:总则(IEC 60871-1-2014);德文版本EN 60871-1-2014

Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General (IEC 60871-1:2014); German version EN 60871-1:2014

BS EN 62813:2015 电气和电子设备用锂离子电容器. 电气特性的试验方法

Lithium ion capacitors for use in electric and electronic equipment. Test methods for electrical characteristics