L11 电容器 标准查询与下载

IEC 60384-22:2011 电子设备用固定电容器.第22部分:分规范:2级陶瓷介质的表面安装固定多层电容器

This part of IEC 60384 is applicable to fixed unencapsulated surface mount multilayer capacitors of ceramic dielectric@ Class 2@ for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted on printed boards@ or directly onto substrates for hybrid circuits. Capacitors for electromagnetic interference suppression are not included@ but are covered by IEC 60384-14.

Fixed capacitors for use in electronic equipment - Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2

IEC 60384-21:2011 电子设备用固定电容器.第21部分:分规范:1级陶瓷介质的表面安装固定多层电容器

This part of IEC 60384 is applicable to fixed unencapsulated surface mount multilayer capacitors of ceramic dielectric@ Class 1@ for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted on printed boards@ or directly onto substrates for hybrid circuits. Capacitors for electromagnetic interference suppression are not included@ but are covered by IEC 60384-14.

Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1

DIN EN 60252-2:2011 交流电动机电容器.第2部分:电动机启动电容器(IEC 60252-2-2010);德文版本EN 60252-2-2011

AC motor capacitors - Part 2: Motor start capacitors (IEC 60252-2:2010); German version EN 60252-2:2011

NF C63-576:2011 混合电动车辆用双层电容器.电气特性的试验方法.

Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics.

JB/T 11206-2011 硅压阻式微型、薄型压力传感器

本标准规定了硅压阻式微型、薄型压力传感器的术语和定义、产品分类、基本参数、要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于硅压阻式微型、薄型压力传感器（以下简称传感器）的生产、使用、验收等。

Silicon piezoresistive miniature and thin line pressure sensors

DIN EN 60384-26-1:2011 电子设备用固定式电容器.第26-1部分:空白详细规范.带有导电性聚合物固体电解质的固定式铝电解电容器.评定等级EZ(IEC 60384-26-1-2010).德文版本EN 60384-26-1-2010

Fixed capacitors for use in electronic equipment - Part 26-1: Blank detail specification - Fixed aluminum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ (IEC 60384-26-1:2010); German version EN 60384-26-1:2010

DIN EN 60384-26:2011 电子设备用固定电容器.第26部分:分规范.带导电聚合物固体电解质的铝电解固定电容器(IEC 60384-26-2010);德文版本EN 60384-26-2010

Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (IEC 60384-26:2010); German version EN 60384-26:2010

BS EN 60252-2:2011+A1:2013 交流电动机电容器.电动机起动电容器

AC motor capacitors. Motor start capacitors

BS EN 60143-4:2010 动力系统串联电容器.晶闸管控制的串联电容器

This part of IEC 60143 specifies testing of thyristor controlled series capacitor (TCSC) installations used in series with transmission lines. This standard also addresses issues that consider ratings for TCSC thyristor valve assemblies, capacitors, and reactors as well as TCSC control characteristics, protective features, cooling system and system operation.

Series capacitors for power systems. Thyristors controlled series capacitors

BS EN 60252-1:2011+A1:2013 交流电动机电容器.总则.性能,试验和评定.安全性要求.安装和运转导则

AC motor capacitors. General. Performance, testing and rating. Safety requirements. Guidance for installation and operation

DIN EN 62490-1:2011 ESL测量方法.第1部分:电子设备用带有铅终端的电容器(IEC 62490-1-2010).德文版本EN 62490-1-2010

ESL measuring method - Part 1: Capacitors with lead terminal for use in electronic equipment (IEC 62490-1:2010); German version EN 62490-1:2010

DIN EN 62490-2:2011 ESL测量方法.第2部分:电子设备用表面安装电容器(IEC 62490-2-2010).德文版本EN 62490-2-2010

ESL measuring method - Part 2: Surface mount capacitors for use in electronic equipment (IEC 62490-2:2010); German version EN 62490-2:2010

DB35/T 1106-2011 聚合物片式叠层铝电解电容器

本标准规定了聚合物片式叠层铝电解电容器术语和定义、分类与命名、技术要求、试验和测量程序、质量评定程序、标志、包装和贮存。 本标准适用于聚合物片式叠层铝电解电容器(以下简称电容器)。

Polymer Chip Multilayer Aluminum Electrolytic Capacitors

NF C93-112-26-1*NF EN 60384-26-1:2011 电子设备用固定电容器.第26-1部分:空白详细规范.导电聚合物固体电解质的固定铝电解电容器.评定等级EZ

Fixed capacitors for use in electronic equipment - Part 26-1 : blank detail specification - Fixed aluminum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ.

NF C93-112-26:2011 电子设备的固定电容器.第26部分:分规范.带传导聚合固体电解质的固定铝制电解电容器.

Fixed capacitors for use in electronic equipment - Part 26 : sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte.

KS C IEC 60384-2:2010 电子设备用固定电容器.第2部分:分规范:金属化聚乙烯对苯二甲酸乙二酸酯薄膜介质直流固定电容器

이 표준은 전자 장비에 사용되는 금속화 전극 및 폴리에틸렌-테레프탈레이트 유전체를 갖는 직

Fixed capacitors for use in electronic equipment-Part 2:Sectional specification:Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors

IEC 60252-2:2010 交流电动机电容器.第2部分:电动机起动电容器

This part of IEC 60252 applies to motor start capacitors intended for connection to windings of asynchronous motors supplied from a single-phase system having the frequency of the mains. This standard covers impregnated or unimpregnated metallized motor start capacitors having a dielectric of paper or plastic film, or a combination of both and electrolytic motor start capacitors with non-solid electrolyte, with rated voltages up to and including 660 V.

AC motor capacitors - Part 2: Motor start capacitors

BS EN 60384-26-1:2010 电子设备用固定电容器.空白详细规范.带传导聚合固体电解质的固定铝制电解电容器.评估等级EZ

Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed aluminum electrolytic capacitors with conductive polymer solid electrolyte. Assessment level EZ

BS EN 60384-26:2010 电子设备用固定电容器.分规范.带传导聚合固体电解质的固定铝制电解电容器

This part of IEC 60384 is applicable to aluminium electrolytic capacitors with conductive polymer solid electrolyte primarily intended for d.c. applications for use in electronic equipment.

Fixed capacitors for use in electronic equipment. Sectional specification. Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte

BS EN 62490-2:2010 ESL测量方法.电子设备用表面安装电容器

This part of IEC 62490 provides the ESL measuring method for the surface mount capacitors for use in electronic equipment. The ESL measurement method can be applicable to the surface mount capacitors with the following properties, but not limited to these: a) capacitance range: 10 μF to 1 000 μF; b) size: L × W = 3,2 mm × 1,6 mm to 7,3 mm × 4,3 mm, H = 4,0 mm; c) ESL range: 5 nH or less. NOTE The surface mount capacitors in this document are limited to capacitors with lead frame or with thin coated terminals, see Figure 1. The scope of this document does not include capacitors with face down terminals, see Figure 2.

ESL measuring method. Part 2: Surface mount capacitors for use in electronic equipment