L11 电容器 标准查询与下载

NF C83-158:2006 空白详细规范:金属箔式聚丙烯膜介质直流固定电容器.评定水平E.

Blank Detail Specification : fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E.

NF C83-159*NF EN 131802:2006 空白详细规范:固定式直流聚丙烯薄膜介质金属箔电容器.评估等级 EZ

Blank Detail Specification : fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level EZ.

BS EN 62391-1:2006 电子设备中用固定式双层电容器.第1部分:一般规范

This part of IEC 62391 applies to fixed electric double layer capacitors (hereafter called “capacitor(s)”) mainly used in DC circuits of electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose.

Fixed electric double-layer capacitors for use in electronic equipment - Part 1: Generic specification

DIN EN 60384-17-1:2006 电子设备用固定电容器.第17-1部分:空白详细规范:金属化聚丙烯薄膜介质直流和脉冲电容器.评定等级E和EZ(IEC 60384-17-1:2005)

Fixed capacitors for use in electronic equipment - Part 17-1: Blank detail specification - Fixed metallized polypropylene film dielectric a.c. and pulse capacitors - Assessment levels E and EZ (IEC 60384-17-1:2005); German version EN 60384-17-1:2005

DIN EN 60384-17:2006 电子设备用固定电容器.第17部分:分规范:金属化聚丙烯薄膜介质直流和脉冲电容器(IEC 60384-17:2005)

The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 60384-1, the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification shall be of an equal or higher performance level, because lower performance levels are not permitted.#,,#

Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors (IEC 60384-17:2005); German version EN 60384-17:2005

DIN EN 60384-2-1:2006 电子设备用固定电容器.第2-1部分:空白详细规范:金属化聚对苯二甲酸乙酯薄膜介质直流固定电容器.评定等级E和EZ(IEC 60384-2-1:2005)

Fixed capacitors for use in electronic equipment - Part 2-1: Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors - Assessment levels E and EZ (IEC 60384-2-1:2005); German version EN 60384-2-1:2005

DIN EN 60384-16:2006 电子设备用固定电容器.第16部分:分规范:金属化聚丙烯薄膜介质直流固定电容器(IEC 60384-16:2005)

Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors (IEC 60384-16:2005); German version EN 60384-16:2005

DIN EN 60384-16-1:2006 电子设备用固定电容器.第16-1部分:空白详细规范:金属化聚丙烯薄膜介质直流固定电容器.评定等级E和EZ(IEC 60384-16-1:2005)

Fixed capacitors for use in electronic equipment - Part 16-1: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors - Assessment levels E and EZ (IEC 60384-16-1:2005); German version EN 60384-16-1:2005

BS EN 62391-2-1:2006 电子设备用双层固定电容器.空白详细规范.电力应用的双层电容器.评定等级EZ

Fixed electric double-layer capacitors for use in electronic equipment - Blank detail specification - Electric double-layer capacitors for power application - Assessment level EZ

BS EN 62391-2:2006 电子设备用双层固定电容器.分规范.电力应用的双层电容器

This part of IEC 62391 applies to electric double-layer capacitors for power application. Electric double-layer capacitors for power are intended for applications that require discharge currents in the range from mA to A. The characteristics of the capacitors include such performance as relatively high capacitance and low internal resistance, which is applicable to Class 3 of the measurement classification specified in IEC 62391-1. The definition of power density and its calculating procedure should be in accordance with Annex A.

Fixed electric double-layer capacitors for use in electronic equipment - Sectional specification - Electric double-layer capacitors for power application

BS EN 60384-2-1:2005 电子设备用固定电容器.第2-1部分:空白详细规格.金属化聚对苯二甲酸乙二酯薄膜电介质直流固定电容器.评定等级E和EZ

Fixed capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Fixed metallized polyethtylene-terephthalate film dielectric d.c. capacitors - Assessment levels E and EZ

BS EN 60384-6:2005 电子设备用固定电容器.第6部分:分规范.金属化聚碳酸酯膜介质直流固定电容器

This part of IEC 60384 applies to fixed capacitors for direct current with metallized electrodes and polycarbonate dielectric for use in electronic equipment. These capacitors may have "self-healing properties" depending on conditions of use. They are primarily intended for applications where the a.c. component is small with respect to the rated voltage. Two performance grades of capacitors are covered, Grade 1 for long-life application and Grade 2 for general application. Capacitors for electromagnetic interference and connection to the supply mains are not included but are covered by IEC 60384-14.

Fixed capacitors for use in electronic equipment - Part 6: Sectional specification - Fixed metallized polycarbonate film dielectric d.c. capacitors

BS EN 60384-23-1:2005 电子设备用固定电容器.空白详细规范.金属化聚萘二甲酸乙二醇酯薄膜电介质芯片直流固定电容器.评定等级EZ

Fixed capacitors for use in electronic equipment - Blank detail specification - Fixed metallized polyethylene naphthalate film dielectric chip d.c. capacitors - Assessment level EZ

BS EN 60384-14-1:2005 电子设备用固定电容器 第14-1部分 空白详细规范 电磁干扰抑制和供电干线连接用固定电容器 评定等级D

Fixed capacitors for use in electronic equipment - Part 14-1: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level D

BS EN 60384-19-1:2006 电子设备用固定电容器.第19-1部分:空白详细规范.金属化聚对苯二甲酸乙二醇酯膜电介质表面安装直流固定电容器.评定等级EZ

The text of document 40/1623/FDIS, future edition 2 of IEC 60384-19-1, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60384-19-1 on 2006-02-01. The following dates were fixed: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2006-11-01 – latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2009-02-01 Annex ZA has been added by CENELEC.

Fixed capacitors for use in electronic equipment — Part 19-1: Blank detail specification — Fixed metallized polyethyleneterephthalate film dielectric surface mount d.c. capacitors — Assessment level EZ

BS EN 60384-6-1:2005 电子设备用固定电容器.第6-1部分:空白详细规范.金属化聚碳酸酯薄膜电介质直流固定电容器.评定等级E

Fixed capacitors for use in electronic equipment - Part 6-1: Blank detail specification - Fixed metallized polycarbonate film dielectric d.c. capacitors - Assessment level E

BS EN 60384-13:2006 电子设备用固定电容器.第13部分:分规范.聚丙烯膜介质金属箔直流固定电容器

This part of IEC 60384 is applicable to fixed direct current capacitors, using as dielectric a polypropylene film with electrodes of thin metal foils. The capacitors covered by this standard are intended for use in electronic equipment. Capacitors for electromagnetic interference suppression are not included but are covered by IEC 60384-14.

Fixed capacitors for use in electronic equipment - Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors

BS EN 60384-19:2006 电子设备用固定电容器.第19部分:分规范.金属化聚对苯二甲酸乙二醇酯膜电介质表面安装直流固定电容器

This part of IEC 60384 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted direct onto substrates for hybrid circuits or onto printed boards. These capacitors may have "self-healing properties" depending on conditions of use. They are primarily intended for applications where the a.c. component is small with respect to the rated voltage. Capacitors for electromagnetic interference suppression are not included but are covered by IEC 60384-14.

Fixed capacitors for use in electronic equipment — Part 19: Sectional specification — Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors

NF C93-112-19-1*NF EN 60384-19-1:2006 电子设备用固定电容器 第19-1部分:空白详细规范:金属聚乙烯对苯二甲酸酯膜介质片直流固定电容器.评价水平EZ

Fixed capacitors for use in electronic equipment - Part 19-1 : blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors - Assessment level EZ.

NF C93-112-19:2006 电子设备用固定电容器.第19部分:分规范:金属聚乙烯对苯二甲酸酯膜表面介质直流固定电容器.评价水平EZ

Fixed capacitors for use in electronic equipment - Part 19 : sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors.