L11 电容器 标准查询与下载

IEC 60384-25-1:2006 电子设备用固定电容器.第25-1部分:空白详细规范.带传导聚合固体电解质的表面安装固定铝制电解电容器.评定级EZ

Fixed capacitors for use in electronic equipment - Part 25-1: Blank detail specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ

IEC 60384-25:2006 电子设备用固定电容器.第25部分:分规范.带传导聚合固体电解质的表面安装固定铝制电解电容器

This part of IEC 60384 is applicable to aluminium electrolytic capacitors with conductive polymer solid electrolyte. These capacitors are primarily intended to be mounted direct on substrates for hybrid circuits or to printed boards. Fixed aluminium electrolytic chip capacitors with solid (MnO2) are not included but are covered by IEC 60384-18.

Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte

IEC 60384-24-1:2006 电子设备用固定电容器.第24-1部分:空白详细规范.带传导聚合固体电解质的表面安装固定钽制电解电容器.评定级EZ

Fixed capacitors for use in electronic equipment - Part 24-1: Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ

IEC 60384-24:2006 电子设备用固定电容器.第24部分:分规范.带传导聚合固体电解质的表面安装固定钽制电解电容器

This part of IEC 60384 is applicable to tantalum electrolytic capacitors with conductive polymer solid electrolyte. These capacitors are primarily intended to be mounted direct on to substrates for hybrid circuits or to printed boards. Fixed tantalum electrolytic chip capacitors with solid (MnO2) are not included but are covered by IEC 60384-3.

Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte

DIN EN 60384-6-1:2006 电子设备用固定电容器 第6-1部分:空白详细规范:金属化聚碳酸酯膜介质直流固定电容器.评定水平E

A blank detail specification is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications.

Fixed capacitors for use in electronic equipment - Part 6-1: Blank detail specification - Fixed metallized polycarbonate film dielectric d.c. capacitors - Assessment level E (IEC 60384-6-1:2005); German version EN 60384-6-1:2005

DIN EN 60871-1:2006 额定电压1kV以上交流电力系统的并联电容器.第1部分:总则(IEC 60871-1-2005)

Shunt capacitors for a.c. power systems having a rated voltage above 1000 V - Part 1: General (IEC 60871-1:2005); German version EN 60871-1:2005

GJB/Z 148-2006 军用电容器选择和应用指南

本指导性技术文件给出了军用设备设计和制造所选用的推荐类型电容器和军用设备所使用电容器的选择和应用指南。本指导性技术文件仅作为指南应用，不能作为要求引用。本指导性技术文件中所有数据仅供参考。 本指导性技术文件中给出的电容器的要求包括在引用的规范中。 本指导性技术文件适用于下列用途： a）为设计师选用电容器提供参考依据。 b）限制军用电容器的品种，达到使用的品种最少，以方便设备的战场使用及后勤保障。 c）概述了军用设备中有关电容器的使用、选择和应用准则。为设备设计师在选用电容器时提供参考。 d）为编制军用设备采购用的推荐电容器手册提供参考。

Capacitors, selection and use of military

IEC 60384-23:2006 电子设备用固定电容器.第23部分:分规范.表面安装的金属化聚乙烯苯二甲酸盐薄膜介质直流固定电容器

Is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene naphthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended

Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors

IEC 60384-23-1:2006 电子设备用固定电容器.第23-1部分:空白详细规范.表面安装的金属化聚乙烯苯二甲酸盐薄膜介质直流固定电容器

Fixed capacitors for use in electronic equipment Part 23-1: Blank detail specification Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors Assessment level EZ General data Inspection requirements

Fixed capacitors for use in electronic equipment - Part 23-1: Blank detail specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors - Assessment level EZ

DIN EN 60384-6:2006 电子设备用固定电容器.第6部分:分规范.金属化聚碳酸酯膜介质直流固定电容器 (IEC 60384-6-2005)

This part of IEC 60384 applies to fixed capacitors for direct current with metallized electrodes and polycarbonate dielectric for use in electronic equipment.

Fixed capacitors for use in electronic equipment - Part 6: Sectional specification - Fixed metallized polycarbonate film dielectric d.c. capacitors (IEC 60384-6:2005); German version EN 60384-6:2005

NF C93-112-2:2006 电子设备用固定电容器.第2部分:分规范:金属化聚对苯二甲酸乙酯薄膜介质直流固定电容器

Fixed capacitors for use in electronic equipment - Part 2 : sectional specification : Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors.

JEITA RC2003-2006 电气设备和电子设备用带有引线端子的电容器的低ESL测量方法

Low ESL measuring method on capacitors with lead terminal for use in electrical and electronic equipment

DIN EN 60384-14-1:2006 电子设备用固定电容器 第14-1部分:空白详细规范:抑制电磁干扰和电源网络连接用固定电容器.评定水平D

Fixed capacitors for use in electronic equipment - Part 14-1: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level D (IEC 60384-14-1:2005); German version EN 60384

IEC 62391-2-1:2006 电子设备用双层固定电容器.第2-1部分:空白详细规范.电力应用的双层电容器.评定等级EZ

Fixed electric double-layer capacitors for use in electronic equipment - Part 2-1: Blank detail specification -Electric double-layer capacitors for power application -Assessment level EZ General data Inspection requirements Part 2-1: Blank detail specification -Electric double-layer capacitors for power application -Assessment level EZ

Fixed electric double-layer capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Electric double-layer capacitors for power application - Assessment level EZ

IEC 62391-1:2006 电子设备用双层固定电容器.第1部分:通用规范

This part of IEC 62391 applies to fixed electric double layer capacitors (hereafter called "capacitor(s)") mainly used in DC circuits of electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose.

Fixed electric double-layer capacitors for use in electronic equipment - Part 1: Generic specification

DIN EN 60384-14:2006 电子设备用固定电容器.第14部分:节规范:抑制电磁干扰和电源网络连接用固定电容器

Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (IEC 60384-14:2005); German version EN 60384-14:2005

IEC 62391-2:2006 电子设备用双层固定电容器.第2部分:分规范:电力应用的双层电容器

This part of IEC 62391 applies to electric double-layer capacitors for power application. Electric double-layer capacitors for power are intended for applications that require discharge currents in the range from mA to A. The characteristics of the capacitors include such performance as relatively high capacitance and low internal resistance, which is applicable to Class 3 of the measurement classification specified in IEC 62391-1. The definition of power density and its calculating procedure should be in accordance with Annex A.

Fixed electric double layer capacitors for use in electronic equipment - Part 2: Sectional specification: Electric double layer capacitors for power application

JIS C 5101-21:2006 电子设备用固定电容器.第21部分:分规范:1级陶瓷介质的表面安装固定多层电容器

この規格は，JIS C 5101-1を品目別通則とする品種別通則で，電子機器用の外装なし固定積層磁器コノデノサ種類1の表面実装用コンデンサ(以下,コンデンサという。)について規定する。

Fixed capacitors for use in electronic equipment -- Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class1

JIS C 5101-21-1:2006 电子设备用固定电容器.第21-1部分:空白详细规范:1级陶瓷介质的表面安装固定多层电容器.评定级别EZ

この規格は，JIS C 5101-21を品種別通則とすろブランク個別規格で.電子機器用の表面実装用固定債層磁器コンデンサ種類1評価水準EZについて規定する。

Fixed capacitors for use in electronic equipment -- Part 21-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 -- Assessment level EZ

JIS C 5101-22-1:2006 电子设备用固定电容器.第22-1部分:空白详细规范:2级陶瓷介质的表面安装固定多层电容器.评定级别EZ

この規格は，JIS C 5101-22を，品種別通則とするブランク個別規格で，電子機器用の表面実装用固定積層磁器コンデンサ種類2評価水準EZについて規定する。

Fixed capacitors for use in electronic equipment -- Part 22-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 -- Assessment level EZ