L13 电阻器 标准查询与下载

SJ 54154/1-2001 RXG12型散热器安装功率线绕固定电阻器详细规范

Resistors,fixed,wire-wound,power,chassis mounted,style RXG12,detail specification for

KS C IEC 60738-1-1:2001 热敏电阻器.直热式突变型正温度系数.第1-1部分:空白详细规范:限流应用.评估级别EZ

Blank 개별 규격은 품목 규격을 보충하는 형식, 구성 및 개별 규격의 최소 내용에

Thermistors-Directly heated positive step-function temperature coefficient-Part 1-1:Blank detail specification -Current limiting application-Assessment level EZ

KS C IEC 60738-1:2001 热敏电阻器.直热式突变型正温度系数.第1部分:总规范

이 규격은 절연형과 비절연형, 강유전성 반도체 재료로 만들어진 정의 계단 함수 온도 계수를

Thermistors-Directly heated positive step-function temperature coefficient-Part 1:Generic specification

KS C IEC 60738-1-4:2001 热敏电阻器.直热式突变型正温度系数.第1-4部分:空白详细规范:敏感作用.评估级别EZ

이 규격은 1998년에 12월에 제1판으로서 발행된 IEC 60738-1-4, Ther

Thermistors-Directly heated positive step-function temperature coefficient-Part 1-4:Blank detail specification -Sensing application-Assessment level EZ

KS C IEC 60738-1-3:2001 热敏电阻器.直热式突变型正温度系数.第1-3部分:空白详细规范:起动电流应用.评估级别EZ

서 문 이 규격은 1998년에 12월에 제1판으로 발행된 IEC 60738-1-3,

Thermistors-Directly heated positive step-function temperature coefficient-Part 1-3:Blank detail specification-Inrush current application-Assessment level EZ

KS C IEC 60738-1-2:2001 热敏电阻器.直热式突变型正温度系数.第1-2部分:空白详细规范:加热元件应用.评估级别EZ

서 문 이 규격은 1998년 12월에 제2판으로 발행된 IEC 60738-1-2,

Thermistors-Directly heated positive step-function temperature coefficient-Part 1-2:Blank detail specification-Heating element application-Assessment level EZ

NF C93-537-1-5*NF EN 50289-1-5:2001 通信电缆.试验方法规范.第1-5部分:电气试验方法.电容量

Communication cables - Specifications for test methods - Part 1-5 : electrical test methods - Capacitance.

NF C93-537-1-8:2001 通信电缆.试验方法规范.第1-8部分:电气试验方法.衰减

Communication cables - Specifications for test methods - Part 1-8 : electrical test methods - Attenuation.

KS C 0802-2001 电阻器和电容器的标志代码

이 규격은 저항기와 커패시터의 표시 부호에 대하여 적용한다.2.에서 규정한 코드는 고정

Marking codes for resistors and capacitors

KS C 0803-2001 电阻器和电容器优先数系

이 표준 수열은 저항기 및 커패시터 값의 표현에 적용한다.

Preferred number series for resistors and capacitors

DLA MIL-DTL-15109 D-2001 海军船舶的电阻器和可变电阻器

This specification covers Class III shockproof resistors and rheostats for Naval shipboard service.

RESISTORS AND RHEOSTATS, NAVAL SHIPBOARD

DLA DSCC-DWG-97009 REV A-2001 固定薄膜0.3瓦特功率曲线A精密电阻器

This drawing describes the requirements for a fixed, film, 0.3 watt, power curve A, precision resistor.

RESISTOR, FIXED, FILM, PRECISION, 0.3 WATT, POWER CURVE A

DLA DSCC-DWG-97011 REV A-2001 固定薄膜0.15瓦特功率曲线B精密电阻器

This drawing describes the requirements for a fixed, film, 0.15 watt, power curve B, precision resistor.

RESISTOR, FIXED, FILM, PRECISION, 0.15 WATT, POWER CURVE B

DLA DSCC-DWG-97010 REV A-2001 固定薄膜0.3瓦特功率曲线B精密电阻器

This drawing describes the requirements for a fixed, film, 0.3 watt, power curve B, precision resistor.

RESISTOR, FIXED, FILM, PRECISION, 0.3 WATT, POWER CURVE B

IEC 60115-1:2001 电子设备用固定电阻器.第1部分:总规范

This part of IEC 60115 is applicable to fixed resistors for use in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose.

Fixed resistors for use in electronic equipment - Part 1: Generic specification

IEC 60115-1/AMD1:2001 电子设备用固定电阻器 第1部分:总规范 修改1

This is Amendment 1 to IEC 60115-1-1999 (Fixed resistors for use in electronic equipment - Part 1: Generic specification)

Fixed resistors for use in electronic equipment - Part 1: Generic specification; Amendment 1

ANSI/ASTM B267:2001 线绕电阻器电阻丝规范

This specification covers round wire and ribbon with controlled electrical properties for use in wire-wound resistance units and similar applications, but not for use as electrical heating elements. The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Specification for Wire for Use in Wire-Wound Resistors

SJ 51929/10-2000 RJ57型高稳定金属膜固定电阻器详细规范

Resistors,fixed,metal film,high stability,style RJ57,detail specification for

SJ 51432/4-2000 RMK2012型有可靠性指标的片式膜固定电阻器详细规范

Resistors,fixed,film,chip,established reliability,style RMK2012,detail specification for

SJ 51432/3-2000 RMK1608型有可靠性指标的片式膜固定电阻器详细规范

Resistors,fixed,film,chip,established reliability,style RMK1608,detail specification for