共找到 711 条与 电阻器 相关的标准,共 48 页
Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors (IEC 60115-8:2009, modified); German version EN 60115-8:2012
Varistors for use in electronic equipment - Part 1: generic specification
Method of measurement of non-linearity in resistors (IEC 60440:2012); German version EN 60440:2012
Fixed resistors for use in electronic equipment. Sectional specification. Fixed surface mount resistors
Directly heated negative temperature coefficient thermistors - Part 1: generic specification
Method of measurement of non-linearity in resistors
Non-linearity testing is a method to evaluate the integrity of a resistive element. It may be applied as an effective inline screening method suitable to detect and eliminate potential infant mortality failures in passive components. The method is fairly rapid@ convenient@ and the associated equipment is relatively inexpensive. Typical effects causing non-linearity on resistors are e.g. inhomogeneous spots within a resistive film@ traces of film left in the spiraling grooves@ or contact instability between a connecting lead or termination and the resistive element. This International Standard specifies a method of measurement and associated test conditions to assess the magnitude of non-linear distortion generated in a resistor. This method is applied if prescribed by a relevant component specification@ or if agreed between a customer and a manufacturer.
Method of measurement of non-linearity in resistors
Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25; German version EN 140401-804:2011 + AC:2011 + AC:2012
Fixed resistors for use in electronic equipment - Part 1: Generic specification (IEC 60115-1:2008, modified); German version EN 60115-1:2011
Detail specification for RXG21 power type wirewound fixed resistors
Fixed resistors for use in electronic equipment. Generic specification
ANSI approval of UL 1412, which covers fusing resistors and temperature-limited resistors to be employed in radio- and television-type appliances. These requirements also apply to resistor mounting assemblies intended for use with such resistors. These requirements cover fusing resistors and temperature-limited resistors for use in radio- and television-type appliances in circuits that do not involve potentials greater than 2500 V peak.
Standard for Safety for Fusing Resistors and Temperature-Limited Resistors for Radio- and Television-Type Appliances
本规范规定了RMK6332型片式膜固定电阻器(以下简称电阻器)的详细要求。 本规范适用于无失效率等级、有失效率等级和宇航级三种质量等级的电阻器。这些电阻器的特性为E、H、K和M.
Detail specification for RMK6332 style chip film fixed resistor
本规范规定了RMZ3216型含宇航级零欧姆片式膜固定电阻器(以下简称电阻器)的详细要求。 本规范适用于三种质量等级的电阻器:100%筛选的宇航级“T”等级产品;100%筛选的“H”等级产品;采用承制方检验体系来验证产品一致性的“C”等级产品。
Detail specification for RMZ3216 style zero ohm chip fixed resistors including space level
本规范规定了RMK1608型片式膜固定电阻器(以下简称电阻器)的详细要求。 本规范适用于无失效率等级、有失效率等级和宇航级三种质量等级的电阻器。这些电阻器的特性为E、H、K和M.
Detail specification for RMK1608 style chip film fixed resistors
本规范规定了RMZ5025型含宇航级零欧姆片式膜固定电阻器(以下简称电阻器)的详细要求。 本规范适用于三种质量等级的电阻器:100%筛选的宇航级“T”等级产品;100%筛选的“H”等级产品;采用承制方检验体系来验证产品一致性的“C”等级产品。
Detail specification for RMZ5025 style zero ohm chip fixed resistors including space level
本标准规定了RJK53型有失效率等级的金属膜固定电阻器的详细要求。
Detail specification for established reliability fixed metal film resistors,style RJK53
Detail specification for negative temperature coefficient thermistor, type MF11
本规范规定了RMK1005型片式膜固定电阻器(以下简称电阻器)的详细要求。 本规范适用于无失效率等级、有失效率等级和宇航级三种质量等级的电阻器。这些电阻器的特性为E、H、K和M.
Detail specification for RMK1005 style chip film fixed resistors
本规范规定了RMZ6332型含宇航级零欧姆片式膜固定电阻器(以下简称电阻器)的详细要求。 本规范适用于三种质量等级的电阻器:100%筛选的宇航级“T”等级产品;100%筛选的“H”等级产品;采用承制方检验体系来验证产品一致性的“C”等级产品。
Detail specification for RMZ6332 style zero ohm chip fixed resistors including space level
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号