L15 敏感元器件及传感器 标准查询与下载

BS EN 61496-3:2001 机械安全性.电敏防护设备.防漫反射有源光电子保护器件专门要求

Replacement: This part of IEC 61496 specifies additional requirements for the design, construction and testing of electro-sensitive protective equipment (ESPE) for the safeguarding of machinery, employing active opto-electronic protective devices responsive to diffuse reflection (AOPDDRs) for the sensing function. Special attention is directed to requirements which ensure that an appropriate safety-related performance is achieved. An ESPE may include optional safety-related functions, the requirements for which are given both in annex A of this part and in annex A of IEC 61496-1. This part does not specify the dimensions or configurations of the detection zone and its disposition in relation to hazardous parts for any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE. AOPDDRs are devices that have a detection zone specified in two dimensions wherein radiation in the near infrared range is emitted by a transmitter element(s). When the emitted radiation impinges on an object (for example, a person or part of a person), a portion of the emitted radiation is reflected to a receiving element(s) by diffuse reflection whereby the presence of the object can be detected. NOTE Under certain circumstances, limitations of the sensor in relation to its use need to be considered. For example: - Objects that generate mirror-like (specular) reflections may not be detected if the diffuse reflectance value is less than that specified for the "black" test piece. - The determination of the minimal reflection factors for the detection of obstacles is based on the clothing of a person. Objects having a reflectivity lower than that considered in this part may not be detected. Excluded from this part are AOPDDRs employing radiation of wavelength outside the range 820 nm to 946 nm, and those employing radiation other than that generated by the AOPDDR itself. For sensing devices that employ radiation of wavelengths outside this range, this part may be used as a guide. Also excluded are AOPDDRs having a stated detection capability outside the range 50 mm to 100 mm. This part may be relevant to applications other than those for the protection of persons, for example, for the protection of machinery or products from mechanical damage. In such applications, additional requirements may be necessary, for example, when the materials that have to be detected by the sensing function have different properties from those of persons and their clothing. This part does not deal with electromagnetic compatibility (EMC) emission requirements. Opto-electronic devices that perform only one-dimensional spot-like distance measurements, for example, proximity switches, are not covered by this part.

Safety of machinery - Electro-sensitive protective equipment - Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR)

IEEE 528-2001 惯性传感器术语

This standard provides a listing of terms and definitions related to inertial sensors. The criterion for inclusion of terms and definitions in this standard is their general usefulness as related to inertial sensor technology.

Standard for Inertial Sensor Terminology

IEC 60747-14-3:2001 半导体器件 第14-3部分：半导体敏感器 压力敏感器

本标准规定了测量绝压、表压和差压的半导体传感器的要求。

Semiconductor devices - Part 14-3: Semiconductor sensors; Pressure sensors

BS IEC 60747-14-1:2001 分立式半导体器件和集成电路.半导体器件.半导体传感器.总则和分类.传感器总则和半导体传感器分类

Describes general items concerning the specifications for sensors.

Discrete semiconductor devices and integrated circuits - Semiconductor devices - Semiconductor sensors - General and classification - Sensor generals and classification for semiconductor sensors

ANSI/IEEE 528:2001 惯量传感器术语标准

This standard provides a listing of terms and definitions related to inertial sensors. The criterion for inclusion of terms and definitions in this standard is their general usefulness as related to inertial sensor technology.

Standard for Inertial Sensor Terminology

IEC 60747-14-2:2000 半导体器件 第14-2部分:半导体元件 霍尔元件

This part of IEC 60747 provides standards for packaged semiconductor Hall elements which utilize the Hall effect.

Semiconductor devices - Part 14-2: Semiconductor sensors; Hall elements

SJ 20790-2000 电流电压传感器总规范

本规范规定了军用电流电压传感器和电压传感器的通用要求、质量保证规定和试验方法等。 本规范主要适用于其传感器输出与被测电流与电压成线性关系的传感器。其它传感器也可参照采用。

General specification for current and voltage sensors

IEC 60747-14-1:2000 半导体器件 第14-1部分:半导体元件 总则和分类

本标准描述了有关传感器规范的基本条款， 这些条款适用于由半导体材料制造的传感器， 也适应于由其他材料（例如绝缘或铁电材料）所制造的传感器。

Semiconductor devices - Part 14-1: Semiconductor sensors; General and classification

SJ/T 10799-2000 电子元器件详细规范.MF53-1型直热式负温度系数热敏电阻器.评定水平E

Detail specification for electronic component.Directly heated negative temperature coefficient thermistor for style MF53-1.Assessment level E

IEC PAS 62168:2000 湿敏器件的符号和标签

Symbol and labels for moisture-sensitive devices Introduction Purpose Reference documents Symbol and labels Symbol and labels (cont'd) Symbols and Labels (cont’d) Symbols and Labels (cont’d)

Symbol and labels for moisture-sensitive devices

DLA SMD-5962-90507 REV A-2000 硅单片,温度传感器,线性微型电路

This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.

MICROCIRCUIT, LINEAR, TEMPERATURE TRANSDUCER, MONOLITHIC SILICON

AIR FORCE MS24550 REV D VALID NOTICE 2-2000 方位传感器

MS24550D remains inactive for new design, however the document is valid for acquisition when needed.

TRANSMITTER, POSITION

IEEE 475-2000 300 MHz-40 GHz场干扰传感器的测量程序

Test procedures for microwave field disturbance sensors to measure radio frequency (RF) radiated field strength of the fundamental frequency, harmonic frequencies, near field power flux density, and nonharmonic spurious emissions of sensors operating within the frequency range of 300 MHz to 40 GHz are defined.

Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz

JEDEC JESD22-A118-2000 加速抗湿性.无偏HAST

This test method applies primarily to moisture resistance evaluations and robustness testing, and may be used as an alternative to unbiased autoclave. Samples are subjected to a non-condensing, humid atmosphere, similar to the JESD-22-A 10 1, "Steady State Temperature, Humidity and Bias Life Test", but with a higher temperature. For the temperature limits defined by this procedure, the test will typically generate the same failure mechanisms as those in an unbiased "85 "C/85%RH" Steady State Humidity Life Test, but caution must be used if higher temperatures are considered since non-realistic failure modes can be generated. The use of a non-condensing environment avoids many irrelevant external failures, e.g., pin-to-pin leakage or lead corrosion. However, because absorbed moisture typically decreases glass transition temperature for most polymeric materials, the combination of high humidity and high temperature (> Tg) may produce unrealistic material failures. Thus, caution is needed if and when Unbiased HAST is required for reliability or qualification purposes.

Accelerated Moisture Resistance - Unbiased HAST

JEDEC JESD22-A102-C-2000 加速耐湿性.无偏差压热器

This test method applies primarily to moisture resistance evaluations and robustness testing. Samples are subjected to a condensing, highly humid atmosphere under pressure to force moisture into the package to uncover weaknesses such as delamination and metallization corrosion. This test is used to evaluate new packages or packages that have undergone changes in materials (e.g. mold compound, die passivation) or design (e.g. die/paddle sizes). However, this test should not be applied on laminate or tape based packages i.e. FR4 material, polyimide tape or equivalent.

Accelerated Moisture Resistance - Unbiased Autoclave

ANSI/IEEE 475:2000 300MHz～40GHz现场干扰传感器用标准测量程序

Test procedures for microwave field disturbance sensors to measure radio frequency (RF) radiated field strength of the fundamental frequency, harmonic frequencies, near field power flux density, and nonharmonic spurious emissions of sensors operating within the frequency range of 300 MHz to 40 GHz are defined.

Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz

NF C93-643-409*NF EN 60684-3-409:1999 挠性绝缘套管.第3部分:套管专用型规范.活页409:带聚胺酯(PUR)基涂层的玻璃织物套管

Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheet 409 : glass textile sleeving with polyurethane (PUR)-based coating.

SN/T 0824-1999 出口光栅角位移传感器检验规程

Rules for the inspection of raster angular displacement sensor for export

DLA MIL-T-49447 NOTICE 1-1999 电阻温度传感器

MIL-T-49447, dated 2 November 1988, is inactive for new design and is no longer used, except for replacement purposes.

TEMPERATURE SENSOR, RESISTANCE

DIN EN 60674 Bb.1:1999 电器用塑料薄膜.型号对比的相关标准目录(1999版)

Plastic films for electrical purposes - List of relevant standards, comparison of types (status of 1999)