L17 电感器、变压器 标准查询与下载

DIN EN 129000/A1:1996 总规范:RF固定线圈电感器

The document is applicable to RF fixed wound inductors (with inductance values below 10 mH) for use in electronic equipment.

Generic specification; Fixed RF wound inductors; German version EN 129000:1993/A1:1995

DIN EN 129102/A1:1996 空白详细规范.经质量评定的线圈表面安装的电感器:评估等级 P

The document contains a blank detail specification for wirewound surface mounting inductors for assessed quality, assessment level P.#,,#

Blank detail specification: Wirewound surface mounting inductors of assessed quality - Assessment level P; German version EN 129102:1994/A1:1995

BS EN 60742:1996 隔离变压器和安全隔离变压器.要求

Isolating transformers and safety isolating transformers - Requirements

BS EN 129200:1996 电子元器件质量评定协调体系.分规范.射频电路用带陶瓷或铁心的铜导线线绕固定电感器.

Prescribes preferred ratings and characteristics and selects from BS EN 129000:1995 the appropriate quality assessment procedures , measuring methods and gives general performance requirements for this type of inductor.

Harmonized system of quality assessment for electronic components - Sectional specification: fixed inductors with ceramic or ferrite core wound with copper wire for RF circuits

BS EN 129101:1995 电子元器件质量评定协调体系.空白详细规范:经质量评估的线绕面安装电感器.评估等级E级

Lists the ratings, characteristics and inspection requirements which shall be included as mandatory requirements in any detail specification for this type of inductor.

Harmonized system of quality assessment for electronic components - Blank detail specification: wirewound surface mounting inductors of assessed quality - Assessment level E

BS EN 129202:1995 电子元器件质量评定协调体系规范.空白详细规范:陶制磁芯或铁芯线绕电感器.评估等级P级

Lists the ratings, characteristics and inspection requirements to be included as mandatory requirements in any detail specification.

Specification for harmonized system of quality assessment for electronic components - Blank detail specification: wirebound inductors with ceramic or ferrite core - Assessment level P

BS EN 129201:1995 电子元器件质量评定协调体系规范.空白详细规范:陶制磁芯或铁芯线绕电感器.评估等级E级

Lists the ratings, characteristics and inspection requirements to be included as mandatory requirements in any detail specification.

Specification for harmonized system of quality assessment for electronic components - Blank detail specification: wirewound inductors with ceramic or ferrite core - Assessment level E

BS EN 129102:1995 电子元器件质量评定协调体系规范.空白详细规范:线绕面安装电感器.评估等级P级.

Lists the ratings, characteristics and inspection requirements to be included for mandatory requirements in any detail specification.

Specification for harmonized system of quality assessment for electronic components - Blank detail specification: wirewound surface mounting inductors of assessed quality - Assessment level P

BS 7806:1995 干式电力变压器

Dry-type power transformers

JIS C 6436:1995 电子设备用电力变压器

この規格は，主として電子機器に使用する出力1kVA以下,周波数50Hz及び60 Hzの鉄心入単相電源変圧器(以下,変圧器という。)について規定する。

Power transformer for electronic equipment

UL 1876-1995 电子设备中隔离和反馈信号用变压器

Isolating signal and feedback transformers for use in electronic equipment

IEC 60186:1987/AMD2:1995 电压互感器.第2次修改

Voltage transformers; Amendment 2

SJ/T 10685-1995 半导体调幅广播收音机用中频变压器及振荡线圈

本标准规定了半导体调幅广播收音机用中频变压器及振荡线圈的总的要求。本标准适用于半导体调幅广播收音机用中频变压器及振荡线圈。

Intermediate-frequency transformers and oscillator coils for transistorized amplitude modulation broadcast receivers

DIN IEC 60740-2:1995 电信和电子设备变压器和电感器铁芯片.第2部分:软磁金属材料制铁芯片最小漏磁性规范

The document specifies requirements for the minimum permeabilities of laminations made of silicon-iron and nickel-iron alloys as defined by the alloy classes C2, E1, E3 and E4 of IEC 404-1.

Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials (IEC 60740-2:1993)

DIN IEC 60852-5:1995 电信和电子设备用变压器和电感器的外形尺寸.第5部分:使用C铁芯的Q系列变压器和电感器

The document specifies the outline dimensions of transformers and inductors using the series Q of C-cores in accordance with IEC 329.

Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 5: Transformers and inductors using the series Q of C-cores (IEC 60852-2:1994)

IEC 60185:1987/AMD2:1995 电流互感器.第2次修改

Current transformers; Amendment 2

SJ/T 10614-1995 按能力批准程序评定质量的电子设备用电感器分规范

本规范规定了按GB/T 14860《电子和通信设备用变压器和电感器总规范》规定的能力批准程序放行的电感器详细规范制定方法。本规范包括空白详细规范(BDS)，空白详细规范规定了格式并规定了适合于这种类型元件的试验；而最终选入检验一览表的试验项目是由该规范的制定者决定的。本规范还规定了相应的额定值和特性。

Sectional specification for inductors of assessed quality for use in electronic equipment for capability approval

SJ/T 10615-1995 按能力批准程序评定质量的电子设备用信号变压器分规范

本规范规定了按GB/T14860《电子和通信设备用变压器和电感器总规范》规定的能力批准程序放行的信号变压器详细规范制定方法。本规范包括空白详细规范(BDS)，空白详细规范规定了格式并规定了适合于这种类型元件的试验；而最终选入检验一览表的试验项目是由该规范的制定者决定的。本规范还规定了相应的额定值和特性。 本规范规定的元件主要涉及列单向和双向信号(信息)从电路的一部分向另一部分的传输。这些信号可具有一定的功率并覆盖某一频带。

Sectional specification for signal transformers of assessed quality for use in electronic equipment for capability approval

SJ/T 10616-1995 按能力批准程序评定质量的电子设备用脉冲变压器分规范

本规范规定了按GB/T 14860《通信和电子设备用变压器和电感器总规范》规定的能力批准程序放行的脉冲变压器详细规范制定方法。本规范包括空白详细规范(BDS)，空白详细规范规定了格式并规定了适合于这种类型元件的试验；而最终选入检验一览表的试验项目是由该规范的制定者决定的。本规范还规定了相应的额定值和特性。 本规范规定的元件主要涉及到单向脉冲，同时还涉及到这些脉冲的能量和信号从电路的一部分向另一部分的传输。小功率脉冲变压器用以传输信号，大功率脉冲变压器用以传输功率，但两者之间可不规定界限。

Sectional specification for pulse transformers of assessed quality for use in electronic equipment for capability approval

BS EN 129100:1995 电子元器件质量评定协调体系.分规范:线绕面安装电感线圈

Applies to wire wound fixed rectangular shaped surface mounting (SM) inductors with a magnetic or non-magnetic core for use in electronic equipment.

Harmonized system of quality assessment for electronic components - Sectional specification: wirewound surface mounting inductors