L19 磁性元器件 标准查询与下载

IEC 62317-1:2007 铁氧体芯的尺寸.第1部分:总规范

It is intended that this standard will include ferrite cores which are widely used and referenced in industry, either because they are included in national standards, or because they are seen to have broad-based use in industry. Where applicable, it is intended that the existing industrial name for each standard part should appear with the part within this series. It is intended that this standard will exclude ferrite cores which are specialty cores with limited used. Also, special cores which are only marginal variations upon standard cores are excluded. IEC publishes electrical standards for families of ferrite cores, as well as this series of dimensional standards for families of ferrite cores. Modifications to the ferrite cores listed in one type of standard should be reflected in the other type.

Ferrite cores - Dimensions - Part 1: General specification

IEC 62025-1:2007 高频感应元件.非电气特性和测量方法.第1部分:电子和远程通信设备用固定式表面安装的感应器

This part of IEC 62025 applies to fixed, surface mounted inductors and ferrite beads. Should conflict arise between these specifications and the detail specifications, the latter will take precedence.

High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment

DIN EN 10280:2007 磁性材料.用单薄板材试验机测量电器薄板材和带材的磁特性法

This European Standard defines the general principles of the measurement of the magnetic properties of electrical sheets and strips by means of a single sheet tester and gives the technical details of the measurement of specific total loss and of magnetic field strength, excitation current and specific apparent power. This European Standard is applicable at power frequencies to: a) grain oriented magnetic sheet and strip: - for the measurement between 1,0 T and 1,8 T of: - specific total loss; - specific apparent power; - r.m.s. value of the magnetic field strength; - for the measurement up to peak values of magnetic field strength of 1000A/m of: - peak value of the magnetic polarization; - peak value of the magnetic field strength; b) non-oriented magnetic sheet and strip: - for the measurement between 0,8 T and 1,5 T of: - specific total loss; - specific apparent power; - r.m.s. value of excitation current; - for the measurement up to peak values of magnetic field strength of 10000A/m of: - peak value of the magnetic polarization; - peak value of the magnetic field strength. The single sheet tester is applicable to test specimens obtained from electrical sheets and strips of any quality.The magnetic characteristics are determined for a sinusoidal induced voltage,for specified peak values of magnetic polarization and for a specified frequency. The measurements are made at an ambient temperature of 23°C±5°C on test specimens which have first been demagnetized.

Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester; German version EN 10280:2001+A1:2007

DIN EN 62317-9:2007 铁氧体磁心.尺寸.第9部分:平面磁心(IEC 62317-9-2006)

This International Standard specifies the shapes and dimensions of ferrite cores for inductive components (transformers and chokes) of which the coil is typically constructed by multi-layer board or the coil is part of the motherboard.

Ferrite cores - Dimensions - Part 9: Planar cores (IEC 62317-9:2006); German version EN 62317-9:2006

IEC 62317-9:2007 铁氧体磁心.尺寸.第9部分:平面磁心

This International Standard specifies the shapes and dimensions of ferrite cores for inductive components (transformers and chokes) of which the coil is typically constructed by multi-layer board or the coil is part of the motherboard. The general consideration upon which the design of this range of cores is based is given in Annex A.

Ferrite cores - Dimensions - Part 9: Planar cores

DIN EN 60556:2007 应用于微波频率的旋磁材料.性能测试方法(IEC 60556-2006)

This standard describes methods of measuring the properties used to specify polycrystalline microwave ferrites in accordance with IEC 60392 and for general use in ferrite technology.

Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties (IEC 60556:2006); German version EN 60556:2006

KS C IEC 61246:2006 矩形截面磁性氧化磁芯(E型磁芯)及其附件.尺寸

이 규격은 자성 산화물로 만들어진 직사각형 단면을 갖는 E-코어에 대하여 기계적인 호환성에

Magnetic oxide cores(E-cores) of rectangular cross-section and associated parts-Dimensions

KS C IEC 60424-1:2006 铁氧体磁芯.表面缺陷极限指南.第1部分:总规范

이 규격은 페라이트 코어의 표면 불규칙의 허용 한계에 관한 지침을 제공한다.이 규격은

Ferrite cores－Guide on the limits of surface irregularities－Part 1：General specification

KS C IEC 60424-3:2006 铁氧体磁芯.表面缺陷极限指南.第3部分:ETD芯和E芯

이 규격은 관련된 품목 규격과 일치하는 ETD-코어, E-코어 및 기타 유사 형상의 코어에

Ferrite cores－Guide on the limits of surface irregularities－Part 3：ETD-cores and E-cores

KS C IEC 60424-4:2006 铁氧体磁芯.表面缺陷极限指南.第4部分:环形磁芯

이 규격은 관련된 품목 규격과 일치하는 링-코어에 적용되는 표면 불규칙의 허용 한계에관

Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores

KS C IEC 60424-2:2006 铁氧体磁芯.表面缺陷极限指南.第2部分:RM.磁芯

이 규격은 관련 품목 규격에 일치하는 RM-코어에 적합한 표면 불규칙의 허용 한계에 관

Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores

JIS C 2560-2:2006 用铁酸盐制造的磁心.测量方法

この規格は，フエライト磁心の低磁界及ぴ高磁界における電磁気的特性の試験方法，機械的強度の試験方法及び外観の検査方法について規定する。

Cores made of ferrite -- Measuring methods

JIS C 2560-3-1:2006 用铁酸盐制造的磁心.第3-1部分:尺寸和表面缺陷.E磁心

この規格は，主に変成器，変圧器及びチョークコイルに使用するE形フエライト磁心(以下.磁心という。)の寸法，それらの寸法を用いて算出する実効パラメータ，磁心とともに用いるボビンの寸法及び外観の許容限界について規定する。

Cores made of ferrite -- Part 3-1: Dimensions and surface irregularities -- E cores

KS C IEC 61631:2006 磁性氧化物制成的磁芯的机械强度试验方法

이 규격은 자성 산화물로 만든 코어의 기계적 강도 시험 방법을 규정한다. 이 시험 방법은

Test method for the mechanical strength of cores made of magnetic oxides

JB/T 10616-2006 强磁体金属薄膜磁敏电阻

本标准规定了非集成的强磁体金属薄膜磁敏电阻（以下简称磁敏电阻）的分类与命名、基本参数、技术要求、试验方法、检验规则以及包装、运输和贮存。

Ferromagnetic metallic thin-filmed magnetroesistance

NF C93-354:2006 磁性零件有效参数的计算

Calculation of the effective parameters of magnetic piece parts.

BS EN 60205:2006 计算磁性零件有效参数

This International Standard lays down uniform rules for the calculation of the effective parameters of closed circuits of ferromagnetic material.

Calculation of the effective parameters of magnetic piece parts

BS EN 60205:2006+A1:2009 磁性零件有效参数的计算

This International Standard lays down uniform rules for the calculation of the effective parameters of closed circuits of ferromagnetic material.

Calculation of the effective parameters of magnetic piece parts

SJ 20966-2006 软磁铁氧体材料测量方法

本标准规定了软磁铁氧体材料电磁性能和物理性能测量方法，不包括机械性能的测量。

Measuring methods for soft ferrite materials

IEC 62317-8:2006 铁氧体磁心.尺寸.第8部分:E磁心

This part of IEC 62317 specifies the dimensions that are of importance for mechanical interchangeability for E-cores with rectangular cross-section made of ferrite, the dimensions of coil formers to be used with them, and the effective parameter values to be used in calculations involving them. The selecting core sizes to this standard is based on the philosophy of including those sizes, which are industrial standards, either by inclusion in national standards, or by broad-based use in industry. See IEC 62317-1 for more detail concerning the philosophy of selecting core sizes to be included. NOTE Cores covered by this standard are intended for general applications at both low and high flux densities, but they also find uses in special applications such as pulse transformers. They are generally used in pairs. Whilst the main application of this standard is expected to be for ferrite cores, its validity for iron powder cores should not be overlooked. Coil formers are not specified for E-cores smaller than E 8/2, which are also used in SMD assemblies. The use of “derived” standards, which give a more detailed specification of component parts whilst still permitting compliance with this standard, is discussed in Annex A.

Ferrite cores - Dimensions - Part 8: E-cores