L22 开关 标准查询与下载

DIN 42111-2:1980 固态开关.尺寸、额定值、要求、检验.A型

Solid state switches; dimensions, ratings, requirements, tests; type AFür den Geltungsbereich dieser Norm bestehen keine regionalen oder internationalen Normen.

Solid state switches; dimensions, ratings, requirements, tests, type A

DIN 41636-2:1980 电信技术用微动开关.尺寸、参数、要求、试验.A型

Sensitive switches for communication technology; dimensions, ratings, requirements, tests; type A Für den Geltungsbereich dieser Norm bestehen keine regionalen oder internationalen Normen.

Sensitive switches for communication technology; dimensions, ratings, requirements, tests, type A

SJ 1516-1979 KW1型微动开关

Sensitive switches,Type KW1

SJ 1515-1979 微动开关总技术条件

General technical conditions of micro switch

SJ 1517-1979 KW2型微动开关

Sensitive switches,Type KW2

SJ 1518-1979 KW3型微动开关

Sensitive switches,Type KW3

SJ 1520-1979 KW5型微动开关

Sensitive switches,Type KW5

SJ 1519-1979 KW4型微动开关

Sensitive switches,Type KW4

BS 9563:1979 经质量评定的旋转(手动)转换开关:一般数据和试验方法:详细规范制定的一般规则

General matters, terminology and test procedures (electrical, mechanical, environmental and endurance) and general rules for drafting detail specifications for switches for use primarily in telecommunication and electronic equipment employing similar techniques.

Specification for rotary (manual) switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications

BS 9561:1979 经质量评定的操纵杆控制转换开关规范.一般数据和试验方法.详细规范制定的一般规则

General matters, terminology, test procedures (electrical, mechanical, environmental and endurance) and general rules for drafting detail specifications for switches for use primarily in telecommunication and electronic equipment employing similar techniques.

Specification for lever operated switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications

AIA/NAS NAS 1574-1979 (Rev. 1)非抗风化成套单,双或三盒接头开关

Switch Fitting Box One, Two, or Three Gang, Non-Weatherproof (Rev. 1)

Switch Fitting Box One, Two, or Three Gang, Non-Weatherproof (Rev. 1)

DLA MS27600 REV D-1978 电子器材装备箱自动上锁按钮

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

FASTENER, SELF-LOCKING CASE MOUNTING, ELECTRONIC EQUIPMENT

AIA/NAS NAS 168-1978 (Rev. 6)塑胶有凸边的直径一英寸旋钮

NASM25440, "WASHERS, FOR USE WITH AIRCRAFT ALUMINUM TERMINALS", was adopted on 4 NOVEMBER 1999 for use by the Department of Defense (DoD). Proposed changes by DoD Activities must be submitted to the DoD Adopting Activity: Defense Supply Center Philadelphia, ATTN: DSCP-ILEA, 700 Robbins Avenue, Philadelphia, PA 19111-5096. DoD Activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from thAeE ROSPACE INDUSTRIES 3 9 2 4 . ASSOCIATION OF AMERICA, INC., 1250 EYE STREET, N. W., WASHINGTON, DC 20005.

Knob, One Inch Dia. Knurled Plastic (Rev. 6)

IEC 60341-3:1978 按钮开关.第3部分:多单元型按钮开关

Push-button switches. Part 3: Push-button switches of the multi-cell type

DIN 41634-1:1976 径向焊接终端直径为 17 mm 的 12 部位旋转式晶片开关.第1部分:主要尺寸

Rotary wafer switches, diameter 17 mm; 12 positions, radial soldering terminals; main dimensions

Rotary wafer switches, diameter 17 mm, 12 positions, radial soldering terminals; main dimensions

IEC 60389-1:1972/AMD1:1976 主要用于通信设备和采用类似技术的电子应用方面的恒温开关 第1部分:一般要求和测量方法 修改1

Amends IEC Publication 389-1 by adding new information on the"Operating temperature", "Temperature differential" and "Response time" subclauses.

Thermostatic switches primarily for use in equipment for telecommunications and in electronic applications employing similar techniques. Part 1 : General requirements and measuring methods

NAVY MS25165 REV E-1975 小型照明指针按钮

Metric equivalents (to the nearest . O1 mm) are given for general lnforrnahon only and are based upon 1 inch = 25.4 mm. For design feature purposes, this standard takes precedence over procurement documents referenced herein.

KNOB, POINTER, ILLUMINATED, SMALL

IEC 60132-6:1974 旋转片开关(小电流额定值).第6部分:带印制开关片的旋转片开关.最多12个位置.最大安装尺寸45mm

Rotary wafer switches (low current rating). Part 6 : Rotary wafer switches with printed wafers; maximum 12 positions; maximum mounting dimension 45 mm

IEC 60341-2:1973 按钮开关.第2部分:起草多单元型按钮开关规范活页的一般规则

Push-button switches. Part 2 : General rules for drafting specification sheets for push-button switches of the multi-cell type

IEC 60341-1A:1973 第1次补充

Push-button switches. Part 1 : General requirements and measuring methods.