L47 其他 标准查询与下载

IEC 61988-2-5:2012 等离子显示器.第2-5部分:测量方法.噪声

This part of IEC 61988 determines the following measuring methods for characterizing the performance of PDP modules (plasma display modules): ?C Acoustic noise

Plasma display panels - Part 2-5: Measuring methods - Acoustic noise

BS EN 61988-2-1:2012 等离子体显示板.测量方法.光学和光电

Plasma display panels. Measuring methods. Optical and optoelectrical

DIN EN 61988-2-4:2012 等离子显示屏.第2-4部分:测量方法.视觉质量:图像伪影(IEC 61988-2-4-2011).德文版本EN 61988-2-4-2011

Plasma display panels - Part 2-4: Measuring methods - Visual quality: Image artifacts (IEC 61988-2-4:2011); German version EN 61988-2-4:2011

BS EN 62595-1-2:2012 LCD背光源总之.术语和字母符号

LCD backlight unit. Terminology and letter symbols

DIN EN 61747-6-2:2012 液晶显示器件.第6-2部分:液晶显示模块的测量方法:反射型(IEC 61747-6-2-2011).德文版本EN 61747-6-2-2011

Liquid crystal display devices - Part 6-2: Measuring methods for liquid crystal display modules - Reflective type (IEC 61747-6-2:2011); German version EN 61747-6-2:2011

IEC 62341-6-2:2012 有机发光二极管(OLED)显示器.第6-2部分:视觉质量和环境性能的测量方法

This part of IEC 62341 specifies the standard measurement conditions and measurement methods for determining the visual quality and ambient performance of organic light-emitting diode (OLED) display modules and panels. This document mainly applies to colour display modules.

Organic light emitting diode (OLED) displays - Part 6-2: Measuring methods of visual quality and ambient performance

IEC 61747-6-2:2011/COR1:2012 液晶显示器.第6-2部分:液晶显示模块的测量方法.反射类型.勘误表1

Liquid crystal display devices - Part 6-2: Measuring methods for liquid crystal display modules - Reflective type; Corrigendum 1

DIN EN 61747-5-2:2012 液晶显示器.第5-2部分:环境,耐久性及机械试验方法.目测有源矩阵彩色液晶显示模块(IEC 61747-5-2-2011).德文版 EN 61747-5-2-2011

Liquid crystal display devices - Part 5-2: Environmental, endurance and mechanical test methods - Visual inspection of active matrix colour liquid crystal display modules (IEC 61747-5-2:2011); German version EN 61747-5-2:2011

IEC 61747-5-3:2009/COR1:2011 液晶显示装置.第5-3部分:环境、耐久性和机械试验方法.玻璃强度和可靠性.勘误表1

Liquid crystal display devices - Part 5-3: Environmental, endurance and mechanical test methods - Glass strength and reliability; Corrigendum 1

BS EN 61988-1:2011 电浆显示器.术语和字母符号

Plasma display panels. Terminology and letter symbols

BS EN 61988-2-4:2011 电浆显示器.测量方法.视觉质量.图像伪影

Plasma display panels. Measuring methods. Visual quality. Image artifacts

BS EN 61747-6-3:2011 液晶显示器.液晶显示器模块的测量方法.主动矩阵液晶显示器模块的运动伪影测量

Liquid crystal display devices. Measuring methods for liquid crystal display modules. Motion artifact measurement of active matrix liquid crystal display modules

BS EN 61747-6-2:2011 液晶显示器装置.液晶显示器模块的测量方法.反射式

Liquid crystal display devices. Measuring methods for liquid crystal display modules. Reflective type

BS EN 61747-5-2:2011 液晶显示器装置.环保性,耐久性和机械性试验方法.主动矩阵彩色液晶显示模块的目视检查

Liquid crystal display devices. Environmental, endurance and mechanical test methods. Visual inspection of active matrix colour liquid crystal display modules

IEC 61988-1:2011 等离子体显示板.第1部分:术语和字母符号

This part of IEC 61988 gives the preferred terms@ their definitions and symbols for colour AC plasma display panels (AC PDP); with the object of using the same terminology when publications are prepared in different countries. Guidance on the technology is provided in the annexes.

Plasma display panels - Part 1: Terminology and letter symbols

IEC 61747-6-3:2011 液晶显示器 第6-3部分 液晶显示模块测量方法 有源矩阵液晶显示模块的运动伪影测量

Liquid crystal display devices - Part 6-3: Measuring methods for liquid crystal display modules - Motion artifact measurement of active matrix liquid crystal display modules

IEC 61747-5-2:2011 液晶显示装置 第5-2部分 环境,耐久性和机械试验方法 有源矩阵彩色液晶显示模块的外观检查

This part of IEC 61747 gives the details of the quality assessment procedures and provides general rules for visual inspection of the active area of transmissive type active matrix colour liquid crystal display modules by the human eye. Furthermore@ this standard includes defect definitions and the method for visual defect inspection. NOTE 1 Mura is excluded from this standard because it was not clearly specified at the time this standard was developed. NOTE 2 Restrictions on defect types@ number@ and sizes are specified in the quality contract (customer acceptance specification and incoming inspection specification) between panel and set makers.

Liquid crystal display devices - Part 5-2: Environmental, endurance and mechanical test methods - Visual inspection of active matrix colour liquid crystal display modules

IEC 61747-6-2:2011 液晶和固态显示器件.第6-2部分:液晶显示模组的测量方法.反射类型

"This part of IEC 61747 gives details of the quality assessment procedures@ the inspection requirements@ screening sequences@ sampling requirements@ and test and measurement procedures required for the assessment of liquid crystal display modules. This standard is restricted to reflective liquid crystal display-modules using either segment@ passive or active matrix and a-chromatic or colour type LCDs (see Note). Furthermore@ the reflective modes of transflective LCD modules with backlights OFF and reflective LCD modules of front light type without its front-light-unit@ are comprised in this standard. A reflective LCD module with combination of a touch-key-panel or a front-light-unit is out of the scope of this standard@ because its measurements are frequently inaccurate. Its touch-keypanel or front-light-unit should be removed before it can be included in this scope. NOTE Several points of view with respect to the preferred terminology on ""monochrome""@ ""achromatic""@ ""chromatic""@ ""colour""@ ""full-colour""@ etc. can be encountered in the field amongst spectroscopists@ (general-) physicists@ colour-perception scientists@ physical engineers and electrical engineers. In general@ all LCDs demonstrate some sort of chromaticity (e.g. as function of viewing angle@ ambient temperature or externally addressable means). Pending detailed official description of the subject@ the pre-fix pertaining to the ""chromaticity"" of the display will be used so as to describe the colour capability of the display that is externally (and electrically) addressable by the user. This leads us to the following definitions (see also [19]) a) a monochrome display has NO user-addressable chromaticity (""colours""). It may or may not be ""black and white"" or a-chromatic; b) a colour display has at least two user-addressable chromaticities (""colours""). A 64-colour display has 64 addressable colours (often made using 2 bits per primary for 3 primaries)@ etc. A full-colour display has at least 6 bits per primary (??260 thousand colours). The purpose of this standard is to indicate and list the procedure-dependent parameters and to prescribe the specific methods and conditions that are to be used for their uniform numerical determination."

Liquid crystal display devices - Part 6-2: Measuring methods for liquid crystal display modules - Reflective type

DIN EN 61747-5-3:2010 液晶显示装置.第5-3部分:环境、耐久性和机械试验方法.玻璃强度和可靠性(IEC 61747-5-3-2009,修改件).德文版本EN 61747-5-3-2010

Liquid crystal display devices - Part 5-3: Environmental, endurance and mechanical test methods - Glass strength and reliability (IEC 61747-5-3:2009, modified); German version EN 61747-5-3:2010

IEC 61788-8:2010 超导性.第8部分:交流电损耗测量.用拾波线圈法在液氮温度下测量暴露于横向交流磁场中循环超导导线的交流电总损耗量

This part of IEC 61788 specifies the measurement method of total AC losses by the pickup coil method in composite superconducting wires exposed to a transverse alternating magnetic field. The losses may contain hysteresis, coupling and eddy current losses. The standard method to measure only the hysteresis loss in DC or low-sweep-rate magnetic field is specified in IEC 61788-13 [2]. In metallic and oxide round superconducting wires expected to be mainly used for pulsed coil and AC coil applications, AC loss is generated by the application of time-varying magnetic field and/or current. The contribution of the magnetic field to the AC loss is predominant in usual electromagnetic configurations of the coil applications. For the superconducting wires exposed to a transverse alternating magnetic field, the present method can be generally used in measurements of the total AC loss in a wide range of frequency up to the commercial level, 50/60 Hz, at liquid helium temperature. For the superconducting wires with fine filaments, the AC loss measured with the present method can be divided into the hysteresis loss in the individual filaments, the coupling loss among the filaments and the eddy current loss in the normal conducting parts. In cases where the wires do not have a thick outer normal conducting sheath, the main components are the hysteresis loss and the coupling loss by estimating the former part as an extrapolated level of the AC loss per cycle to zero frequency in the region of lower frequency, where the coupling loss per cycle is proportional to the frequency.

Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method