共找到 430 条与 激光器件 相关的标准,共 29 页
Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities (ISO 21254-3:2011); German version EN ISO 21254-3:2011
Lasers and laser-related equipment. Test methods for laser-induced damage threshold. Assurance of laser power (energy) handling capabilities
Lasers and laser-related equipment. Test methods for laserinduced damage threshold. Threshold determination
Lasers and laser-related equipment. Test methods for laserinduced damage threshold. Definitions and general principles
Lasers and laser-related equipment - Test methods of laser-induced damage threshold - Part 1 : definitions and general principles.
Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 4: Inspection, detection and measurement
Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 1: Tracheal tube shaft
Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 1: Definitions and general principles
Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 2: Threshold determination
Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities
Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) (IEC 60825-2:2004 + A1:2006 + A2:2010); German version EN 60825-2:2004 + A1:2007 + A2:2010
本标准规定了中小功率绿光和蓝光固体激光器晶体器件组件(以下简称晶体组件)的术语和定义、产品分类、技术要求、试验方法、检验规则及包装、标志、运输和贮存。 本标准适用于由激光晶体和非线性光学晶体(以下简称晶体元件)、光学透镜等通过光胶、胶合或侧面固定而制成的中小功率绿光和蓝光固体激光器晶体组件。
Small and medium power green and blue solid-state laser crystal components
IEC 60825-1 is applicable to safety of laser products. For convenience it is divided into three separate sections: Section One (General) and the annexes; Section Two (Manufacturing requirements); and Section Three (User's guide* ).A laser product may consist of a single laser with or without a separate power supply or may incorporate one or more lasers in a complex optical@ electrical@ or mechanical system. Typically@ laser products are used for demonstration of physical and optical phenomena; materials processing; data reading and storage; transmission and display of information; etc. Such systems have found use in industry@ business@ entertainment@ research@ education and medicine. However@ laser products which are sold to other manufacturers for use as components of any system for subsequent sale are not subject to IEC 60825-1@ since the final product will itself be subject to this standard.Throughout this part 1 light emitting diodes (LED) are included whenever the word "laser" is used. See also annex G which describes information which should be provided by manufacturers of LEDs.Any laser product or LED product is exempt from all further requirements of this part 1 if- classification by the manufacturer according to clauses 3@ 8 and 9 shows that the emission level does not exceed the AEL of Class 1 under all conditions of operation@ maintenance@ service and failure@ and- it does not contain an embedded laser or embedded LED.In addition to the hazards resulting from laser radiation@ laser equipment may also give rise to other hazards such as fire and electric shock.This part 1 describes the minimum requirements.Where a laser system forms a part of equipment which is subject to another IEC product safety standard (e.g. for medical equipment (IEC 60601-2-22) IT equipment (IEC 60950)@ audio and video equipment (IEC 60065)@ equipment for use in hazardous atmospheres)@ this part 1 will apply in accordance with the provisions of IEC Guide 104**@ for hazards resulting from laser radiation.However@ if the laser system is operable when removed from the equipment@ all the requirements of this part 1 will apply to the removed unit.If no product safety standard is applicable@ then IEC 61010-1 shall apply.The MPE (maximum permissible exposure) values of this part 1 were developed for laser radiation and do not apply to collateral radiation. However@ if a concern exists that accessible collateral radiation might be hazardous@ the laser MPE values may be applied to conservatively evaluate this risk. The MPE values shall not be applicable to patient exposure to laser radiation for the purpose of medical treatment.NOTE Annexes A to D have been included for purposes of general guidance and to illustrate many typical cases. However@ the annexes must not be regarded as definitive or exhaustive and reference should always be made to the appropriate ciause(s) in Sections One to Three.* Some countries have requirements which differ from Section Three of this part 1. Therefore@ contact the appropriate national agency for these requirements.** IEC Guide 104:1984@ Guide to the drafting of safety standards@ and the role of Committees with safety pilot functions and safety group functions.It gives guidance to IEC technical committees and to writers of specifications concerning the manner in which safety publications should be drafted.This guide does not constitute a normative reference but reference to it is given for information only.
Safety of laser products - Part 1: Equipment classification and requirements
Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 2: Tracheal tube cuffs (ISO 11990-2:2010); German version EN ISO 11990-2:2010
This part of IEC 60825 recommends safety measures to protect against effects caused exclusively by thermal, opto-mechanical and related effects in passive optical components and optical cables used in high optical power fibre communication systems. This technical report does not apply to the use of high power optical systems in explosive atmospheres or the use of optical fibres in material processing machines. Throughout this part of IEC 60825, a reference to ‘laser’ is taken to include light-emitting diodes (LEDs) and optical amplifiers.
Safety of laser products.Part 17: Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems
本标准规定了片猪肉表皮激光灼刻标识码、印的相关术语和定义、技术要求及应用方法。 本标准适用于片猪肉标识码、印的激光灼刻。
Application norms of laser marking on half carcass
AMENDMENT 2 Safety of laser products – Part 2: Safety of optical fibre communication systems (OFCS)
Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 2 : tracheal tube cuffs.
This part of ISO 11990 specifies a method of testing the continuous wave (cw) resistance of the cuff regions of tracheal tubes designed to resist ignition by a laser. Other components of the system, such as the inflation system and shaft (as defined in ISO 11990-1), are outside the scope of this part of ISO 11990.
Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 2: Tracheal tube cuffs
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号