L51 激光器件 标准查询与下载

DIN EN 60825 Bb. 10:2006 激光产品安全性规范. 第10部分: 应用指导及IEC 60825-1 （IEC/TR 60825-10: 2002）附注

Laser Product Safety Regulations. Part 10: Application Guidance and Notes to IEC 60825-1 (IEC/TR 60825-10: 2002)

KS B ISO 11978:2005 眼科光学.接触镜和接触镜保护产品.制造商提供的信息

이 규격은 콘택트렌즈 사용자의 양쪽 유형에 의한 장비와 그 부속물의 정확하고 안전한 사 용

Ophthalmic optics－Contact lenses and contact lens care products－Information supplied by the manufacturer

ANSI Z136.6-2005 户外激光器的安全使用

This standard provides guidance for the safe use of potentially hazardous lasers and laser systems in an outdoor environment. It also provides guidance for controlling disability glare from exposure to non-injurious levels of visible laser light, which m

Safe Use of Lasers Outdoors

PD CLC/TR 50448:2005 激光器安全要求的性能水平指南

This Guide has been prepared in order to provide information and guidance to employers and employees in organisations in which lasers are used. It is supplementary to the safety requirements specified in the EN 60825 series of standards on laser safety. The Guide outlines procedures for the management of laser hazards and defines levels of competence for those who work with laser equipment or who have responsibility for laser safety.

Guide to levels of competence required in laser safety

IEC TR 60825-5:2005 激光产品安全性.第5部分:IEC 60825-1的制造商检查清单

The checklist is intended for use by manufacturers of laser products and their agents to establish that each new or modified design complies with the requirements of IEC 60825-1: 1993 and its amendments 1 and 2. The checklist is not a substitute for IEC

Safety of laser products - Part 5: Manufacturer's checklist for IEC 60825-1

ISO 13694:2000/Cor 1:2005 光学和光学仪器.激光和激光设备.激光束能量密度分布的试验方法.技术勘误1

This is Technical Corrigendum 1 to ISO 13694-2000 (Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power (energy) density distribution)

Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution; Technical Corrigendum 1

NF S10-127-2*NF EN ISO 15367-2:2005 激光及其相关设备.激光束波前形状测定的试验方法.第2部分: 沙克-哈特曼（Shack-Hartmann）传感器

Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2 : Shack-Hartmann sensors.

ISO/TR 22588:2005 光学和光子学.激光和激光相关设备.激光光学元件感应吸收效应的测量和评估

This Technical Report specifies standard measurement and evaluation techniques for determining the absorption-induced effects caused by lasers in laser optical components in order to provide useful information to reduce conflict between users and suppliers of optical components.

Optics and photonics - Lasers and laser-related equipment - Measurement and evaluation of absorption-induced effects in laser optical components

NF S10-120-2:2005 激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.第2部分:一般像散束

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angle and beam propagation ratios - Part 2 : general astigmatic beams.

NF S10-120-1:2005 激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.第1部分:无象散和简单象散束

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angle and beam propagation ratios - Part 1 : stigmatic and simple astigmatic beams.

DIN EN ISO 15367-2:2005 激光及激光相关设备.激光束波前形状测定用试验方法.第2部分:Shack-Hartmann传感器

This standard specifies methods for measurement and evaluation of the wavefront distribution function in a transverse plane of a laser beam utilizing Hartmann or Shack-Hartmann wavefront sensors. This standard is applicable to fully coherent, partially coherent and general astigmatic laser beams, both for pulsed and continuous operation. Furthermore, reliable numerical methods for both zonal and modal reconstruction of the two-dimensional wavefront distribution together with their uncertainty are described. The knowledge of the wavefront distribution enables the determination of several wavefront parameters that are defined in ISO 15367-1.#,,#

Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors (ISO 15367-2:2005); German version EN ISO 15367-2:2005

DIN EN ISO 11146-2:2005 激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.第2部分:一般象散束

This part of ISO 11146 specifies methods for measuring beam widths (diameter), divergence angles and beam propagation ratios of laser beams. This part of ISO 11146 is applicable to general astigmatic beams or unknown types of beam. For stigmatic and simple astigmatic beams, ISO 11146-1 is applicable. Within this part of ISO 11146 the description of laser beams is accomplished by means of the second order moments of the Wigner distribution rather than physical quantities such as beam widths and divergence angles. However these physical quantities are closely related to the second order moments of the Wigner distribution. In ISO/TR 11146-3, formulae are given to calculate all relevant physical quantities from the measured second order moments.#,,#

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams (ISO 11146-2:2005); German version EN ISO 11146-2:2005

DIN EN ISO 11146-1:2005 激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.第1部分:无象散和简单象散束

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams (ISO 11146-1:2005); German version EN ISO 11146-1:2005

DIN EN ISO 11670 Corrigendum 1:2005 激光和激光相关设备. 激光束参数测试方法. 光束位置稳定性（ISO 11670: 2003）DIN EN ISO 11670: 2003-10英文版本勘误表1

Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003) Corrigendum 1 to English version of DIN EN ISO 11670:2003-10

DIN EN ISO 11670 Berichtigung 1:2005 对DIN EN ISO 11670-2003的勘误

This standard defines methods for determining laser beam positional as well as angular stability. The test methods given in this standard are intended to be used for testing and characterization of lasers.

Corrigenda to DIN EN ISO 11670:2003-10; German version EN ISO 11670:2003/AC:2004

BS EN ISO 11146-2:2005 激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.一般象散束

ISO 11146-2:2005 specifies methods for measuring beam widths (diameter), divergence angles and beam propagation ratios of laser beams. ISO 11146-2:2005 is applicable to general astigmatic beams or unknown types of beams. For stigmatic and simple astigmatic beams, ISO 11146-1 is applicable. Within ISO 11146-2:2005, the description of laser beams is accomplished by means of the second order moments of the Wigner distribution rather than physical quantities such as beam widths and divergence angles. However these physical quantities are closely related to the second order moments of the Wigner distribution. In ISO/TR 11146-3, formulae are given to calculate all relevant physical quantities from the measured second order moments.

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - General astigmatic beams

NF C43-805/A1:2005 激光产品的安全.第1部分:设备分类、要求和用户指南

Safety of laser products - Part 1 : equipment classification, requirements and user's guide.

ISO 15367-2:2005 激光及激光相关设备.激光束波前形状测定用试验方法.第2部分:Shack-Hartmann传感器

This part of ISO 15367 specifies methods for measurement and evaluation of the wavefront distribution function in a transverse plane of a laser beam utilizing Hartmann or Shack-Hartmann wavefront sensors. This part of ISO 15367 is applicable to fully coherent, partially coherent and general astigmatic laser beams, both for pulsed and continuous operation. Furthermore, reliable numerical methods for both zonal and modal reconstruction of the two-dimensional wavefront distribution together with their uncertainty are described. The knowledge of the wavefront distribution enables the determination of several wavefront parameters that are defined in ISO 15367-1.

Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors

BS EN ISO 11146-1:2005 激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.无象散和简单象散束

ISO 11146-1:2005 specifies methods for measuring beam widths (diameter), divergence angles and beam propagation ratios of laser beams. ISO 11146-1:2005 is only applicable for stigmatic and simple astigmatic beams. If the type of the beam is unknown and for general astigmatic beams ISO 11146-2 is applicable.

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Stigmatic and simple astigmatic beams

ISO 11810-1:2005 激光和激光相关设备.手术布单和/或病人保护覆盖物耐激光性的试验方法和分类.第1部分:基本点燃和穿透性

This part of ISO 11810 is applicable to disposable and reusable, as well as woven and non-woven materials used as surgical drapes and other patient protective covers which claim to be laser-resistant. The purpose of this part of ISO 11810 is to provide a standardized method for testing and classifying surgical drapes and other patient protective covers with respect to laser-induced hazards. An appropriate classification system is given. It is not the purpose of this part of ISO 11810 to serve as a general fire safety specification, and as such, this part of ISO 11810 does not cover other sources of ignition. It also does not cover the issue of laser-induced secondary ignition. All materials reflect portions of the beam and it is necessary for the user to decide whether specular reflectance may be a hazard. This measurement, however, is not covered in this part of ISO 11810.

Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration