L51 激光器件 标准查询与下载

ISO/TR 11146-3:2004/cor 1:2005 激光和激光相关设备.激光束宽度、发散角度和束扩散率的试验方法.第3部分:本征的和几何的激光束分类、扩散和试验方法细节.技术勘误1

This is Technical Corrigendum 1 to ISO/TR 11146-3-2004 (Lasers and laser-related equipment — Test methods for laser beam widths, divergence angles and beam propagation ratios — Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods)

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods; Technical Corrigendum 1

ISO 11146-2:2005 激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.第2部分:一般像散束

This part of ISO 11146 specifies methods for measuring beam widths (diameter), divergence angles and beam propagation ratios of laser beams. This part of ISO 11146 is applicable to general astigmatic beams or unknown types of beams. For stigmatic and simple astigmatic beams, ISO 11146-1 is applicable. Within this part of ISO 11146, the description of laser beams is accomplished by means of the second order moments of the Wigner distribution rather than physical quantities such as beam widths and divergence angles. However these physical quantities are closely related to the second order moments of the Wigner distribution. In ISO/TR 11146-3, formulae are given to calculate all relevant physical quantities from the measured second order moments.

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams

JIS C 6802:2005 激光产品的安全性

この規格は，レーザ製品の安全について規定する。

Safety of laser products

ISO 11146-1:2005 激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.第1部分:无象散和简单象散束

This part of ISO 11146 specifies methods for measuring beam widths (diameter), divergence angles and beam propagation ratios of laser beams. This part of ISO 11146 is only applicable for stigrnatic and simple astigmatic beams. If the type of the beam is unknown, and for general astigmatic beams, ISO 11146-2 should be applied.

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams

DIN EN 60825-12:2004 激光产品的安全.第12部分:用于信息传输的自由空间光学通信系统的安全

Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information (IEC 60825-12:2004); German version EN 60825-12:2004

KS C IEC 61967-4:2004 集成电路.150KHz.1KHz电磁释放量的测量.第4部分:传导释放量的测量.1Ω.150Ω直接耦合法

이 규격은 150 W 결합 네트워크를 이용한 RF 전압 측정 및 1 W 저항 프로브로 직접

Integrated circuits－Measurements of electromagnetic emissions, 150 kHz to 1 GHz－Part 4：Measurement of conducted emissions－1 W/150 W direct coupling method

BS EN 60825-2:2004+A1:2007 激光产品的安全.光纤通信系统(OFCS)的安全性

Safety of laser products - Safety of optical fibre communication systems (OFCS)

BS EN 60825-2:2004+A2:2010 激光产品的安全性.光纤通信系统(OFCS)的安全性

This Part 2 of IEC 60825 provides requirements and specific guidance for the safe operation and maintenance of optical fibre communication systems (OFCS). In these systems optical power may be accessible outside the confinements of transmitting equipment or at great distance from the optical source. This Part 2 requires the assessment of hazard levels at accessible locations as a replacement for classification according to IEC 60825-1. It applies to the complete installed end-to-end OFCS, including its components and subassemblies that generate or amplify optical radiation. Individual components and subassemblies that are sold only to OEM vendors for incorporation into a complete installed end-to-end OFCS need not be assessed to this standard, since the final OFCS should itself be assessed according to this standard. NOTE 1 The above statement is not intended to prevent manufacturers of such components and subassemblies from using this standard if they wish to do so, or are required to do so by contract. This standard does not apply to optical fibre systems primarily designed to transmit optical power for applications such as material processing or medical treatment. In addition to the hazards resulting from laser radiation, OFCS may also give rise to other hazards, such as fire. This standard does not address safety issues associated with explosion or fire with respect to OFCS deployed in explosive atmospheres. Throughout this part of IEC 60825, a reference to ‘laser’ is taken to include light-emitting diodes (LEDs) and optical amplifiers. NOTE 2 The optical hazard of light emerging from a fibre is determined by the wavelength and power emerging from the fibre and the optical characteristics of the fibre. (See Annex A.). The objective of this Part 2 of IEC 60825 is to: – protect people from optical radiation resulting from OFCS; – provide requirements for manufacturers, installation organizations, service organizations and operating organizations in order to establish procedures and supply information so that proper precautions can be adopted; – ensure adequate warnings are provided to individuals regarding the potential hazards associated with OFCS through the use of signs, labels and instructions. Annex A gives a more detailed rationale for this part of IEC 60825. The safety of an OFCS depends to a significant degree on the characteristics of the equipment forming that system. Depending on the characteristics of the equipment, it may be necessary to mark safety relevant information on the product or include it within the instructions for use. Where required by the level of potential hazard, it places the responsibility for the safe deployment and use of these systems on the installer or end-user / operating organization or both. This standard places the responsibility for adherence to safety instructions during installation and service operations on the installation organization and service organizations as appropriate, and operation and maintenance functions on the end-user or Operating organization. It is recognised that the user of this standard may fall into one or more of the aforementioned categories of manufacturer, installation organization, end-user or operating organization.

Safety of laser products. Safety of optical fibre communication systems (OFCS)

BS EN 60825-2:2004 激光产品的安全.光纤通信系统(OFCS)的安全

This Part 2 of IEC 60825 provides requirements and specific guidance for the safe operation and maintenance of optical fibre communication systems (OFCS). In these systems optical power may be accessible outside the confinements of transmitting equipment or at great distance from the optical source. This Part 2 requires the assessment of hazard levels at accessible locations as a replacement for classification according to IEC 60825-1. It applies to the complete installed end-to-end OFCS, including its components and subassemblies that generate or amplify optical radiation. Individual components and subassemblies that are sold only to OEM vendors for incorporation into a complete installed end-to-end OFCS need not be assessed to this standard, since the final OFCS should itself be assessed according to this standard. NOTE The above statement is not intended to prevent manufacturers of such components and subassemblies from using this standard if they wish to do so, or are required to do so by contract. This standard does not apply to optical fibre systems primarily designed to transmit optical power for applications such as material processing or medical treatment. In addition to the hazards resulting from laser radiation, OFCS may also give rise to other hazards, such as fire. This standard does not address safety issues associated with explosion or fire with respect to OFCS deployed in explosive atmospheres. Throughout this part of IEC 60825, a reference to 'laser' is taken to include light-emitting diodes (LEDs) and optical amplifiers. The objective of this Part 2 of IEC 60825 is to: - protect people from optical radiation resulting from OFCS; - provide requirements for manufacturers, installation organizations, service organizations and operating organizations in order to establish procedures and supply information so that proper precautions can be adopted; - ensure adequate warnings are provided to individuals regarding the potential hazards associated with OFCS through the use of signs, labels and instructions. Annex A gives a more detailed rationale for this part of IEC 60825. The safety of an OFCS depends to a significant degree on the characteristics of the equipment forming that system. Depending on the characteristics of the equipment, it may be necessary to mark safety relevant information on the product or include it within the instructions for use. Where required by the level of potential hazard, it places the responsibility for the safe deployment and use of these systems on the installer or end-user / operating organization or both. This standard places the responsibility for adherence to safety instructions during installation and service operations on the installation organization and service organizations as appropriate, and operation and maintenance functions on the end-user or operating organization. It is recognised that the user of this standard may fall into one or more of the aforementioned categories of manufacturer, installation organization, end-user or operating organization.

Safety of laser products - Safety of optical fibre communication systems (OFCS)

ISO 11252:2004 激光和激光设备.激光装置.对文件的最低要求

This International Standard specifies the minimum documentation and information for marking and labelling, to be provided with laser devices (including laser diodes). The documentation is presented on two levels: as a technical data sheet (Clause 5) and as an instruction manual (Clause 6). This International Standard does not apply to laser products which incorporate laser devices. It also does not apply to laser devices manufactured before the date of publication of this document. Requirements on noise are not included in this standard. These requirements will be included in a subsequent amendment.

Lasers and laser-related equipment - Laser device - Minimum requirements for documentation

DIN EN ISO 13695:2004 光学和光子学.激光及其相关设备.激光光谱特性的试验方法

This standard specifies methods by which the spectral characteristics such as wavelength, bandwidth, spectral distribution and wavelength stability of a laser beam can be measured. This standard is applicable to both continuous wave (cw) and pulsed laser beams. The dependence of the spectral characteristics of a laser on its operating conditions may also be important.

Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers (ISO 13695:2004); German version EN ISO 13695:2004

BS EN ISO 13695:2004 光学和光子学.激光和相关设备.激光的光谱特性的试验方法

ISO 13695:2004 specifies methods by which the spectral characteristics such as wavelength, bandwidth, spectral distribution and wavelength stability of a laser beam can be measured. ISO 13695:2004 is applicable to both continuous wave (cw) and pulsed laser beams. The dependence of the spectral characteristics of a laser on its operating conditions may also be important.

Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers

ISO 13695:2004 光学和光子学.激光及其相关设备.激光光谱特性的试验方法

This International Standard specifies methods by which the spectral characteristics such as wavelength, bandwidth, spectral distribution and wavelength stability of a laser beam can be measured. This International Standard is applicable to both continuous wave (cw) and pulsed laser beams. The dependence of the spectral characteristics of a laser on its operating conditions may also be important.

Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers

BS EN 60825-12:2004 激光产品的安全.用于信息传输的自由空间光通信系统的安全

This part of IEC 60825 provides requirements and specific guidance for the manufacture and safe use of laser products and systems used for point-to-point or point-to-multipoint free space optical data transmission This standard only addresses the open beam portion of the system. If portions of the equipment or system incorporate optical fibre that extends from the confinements of the enclosure(s), the manufacturing and safety requirements under IEC 60825-1 apply to those portions only. This standard does not apply to systems designed for purposes of transmitting optical power for applications such as material processing or medical treatment. This standard also does not apply to the use of systems in explosive atmospheres. Throughout this part of IEC 60825, light-emitting diodes (LEDs) are included whenever the word "laser" is used. The objective of this part of IEC 60825 is to: · provide information to protect people from potentially hazardous optical radiation produced by free space optical communication systems (FSOCS) by specifying engineering controls and requirements, administrative controls and work practices according to the degree of the hazard; · specify requirements for manufacturing, installation, service and operating organisations in order to establish procedures and provide written information so that proper precautions can be adopted. Because of the nature of FSOCS, also known as optical wireless or free-air information transmission systems, care must be taken in their manufacture as well as their installation, operation, maintenance and service to assure the safe deployment and use of these systems. This standard places the responsibility for certain product safety requirements, as well as requirements for providing appropriate information on how to use these systems safely, on the manufacturer of the system and/or transmitters. It places the responsibility for the safe deployment and use of these systems on the installer and/or operating organisation. It places the responsibility for adherence to safety instructions during installation and service operations on the installation and service organisations as appropriate, and during operation and maintenance functions on the operating organisation. It is recognised that the user of this standard may fall into one or more of the categories of manufacturer, installer, service organisation and/or operating organisation as mentioned above. Any laser product is exempt from all further requirements of this part of IEC 60825 if · classification by the manufacturer according to IEC 60825-1 shows that the emission level does not exceed the accessible emission limit (AEL) of Class 1 under all conditions of operation, maintenance, service and failure, and · it does not contain an embedded laser product.

Safety of laser products - Safety of free space optical communication systems used for transmission of information

ISO 11670:2003/cor 1:2004 激光和激光相关设备.激光束参数的试验方法.束位置稳定性.技术勘误1

This is Technical Corrigendum 1 to ISO 11670-2003 (Lasers and laser-related equipment — Test methods for laser beam parameters — Beam positional stability)

Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability; Technical Corrigendum 1

JIS Z 4339:2004 光学受激发光剂量测定系统

この規格は，次の光刺激ルミネセンス線量計測装置について規定する。

Optically stimulated luminescence dosimetry systems

DIN EN ISO 15367-1:2004 激光和激光相关设备.激光束波阵面形状的测试方法.第1部分:术语和基础领域

This standard specifies methods for the measurement of the topography of the wavefront of a laser beam by measurement and interpretation of the spatial distribution of the phase of that wavefront across a plane approximately perpendicular to its direction of propagation. Requirements are given for the measurement and analysis of phase distribution data to provide quantitative wavefront parameters and their uncertainty in a Test Report. The methods described in this standard are applicable to the testing and characterisation of a wide range of beam types from both continuous working and pulsed lasers. Definitions of parameters describing wavefront deformations are given together with methods for the determination of those parameters from phase distribution measurements.

Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367-1:2003); German version EN ISO 15367-1:2003

ISO/TR 11146-3:2004 激光和激光相关设备.激光束宽度、发散角度和束扩散率.第3部分:内在和几何激光束分类、扩散和试验方法细节

This part of ISO 11146 specifies methods for measuring beam widths (diameter), divergence angles and beam propagation ratios of laser beams in support of ISO 11146-1. It provides the theoretical description of laser beam characterization based on the second-order moments of the Wigner distribution, including geometrical and intrinsic beam characterization, and offers important details for proper background subtraction methods recommendable for matrix detectors such as CCD cameras. It also presents alternative methods for the characterization of stigmatic or simple astigmatic beams that are applicable where matrix detectors are unavailable or deliver unsatisfying results.

Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods

BS EN ISO 11551:2004 光学和光学仪器.激光和激光设备

ISO 11551:2003 specifies procedures and techniques for obtaining comparable values for the absorptance of optical laser components.

Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components

KS C IEC 60825-12:2003 激光产品的安全.第12部分:信息传输用自由空间光通信系统的安全

이 규격은 제조자 요구 사항 및 점 대 점간 또는 점대 다점간 자유 공간에서 광을 이용한

Safety of laser products-Part 12:Safety of free space optical communication systems used for transmission of information