L51 激光器件 标准查询与下载

BS EN ISO 11151-1:2000 激光和激光相关设备.标准光学元件.紫外线,可见光和近红外光谱范围内的元件

This part of ISO 11151 specifies requirements for laser components used in the near ultra-violet, visible and near infrared spectral ranges, from wavelengths 190 nm to 2 100 nm, and facilitates the supply of spare parts — by specifying preferred dimensions and tolerances, thereby reducing the variety of types; — by standardizing the specifications and removing barriers to trade; — by establishing an agreed designation for item orders. This part of ISO 11151 covers planar, piano-spherical and spherical substrates, lenses and optical components that are designed specifically as standardized optical components normally offered via catalogue from suppliers and intended for use with lasers. This part of ISO 11151 includes component descriptions, materials employed, physical dimensions and manufacturing tolerances (including surface finish, figure and parallelism). Although most, but not all, of these components are coated (fully reflecting, partially reflecting or anti-reflecting) before incorporation into the laser system, this part of ISO 11151 does not include recommendations for the specification of coatings. NOTE For optical components used in the infrared spectral range (>2 100nm), refer to ISO 11151-2. For the specification and testing of optical coatings, refer to the ISO 9211 series.

Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges

BS EN ISO 11151-2:2000 激光和激光相关设备.标准光学元件.红外光谱范围内的元件

This part of ISO 11151 specifies requirements for laser components used in the infrared spectral range, from wavelengths 2,10 ?m to 15,0 ?m, and facilitates the supply of spare parts: — by specifying preferred dimensions and tolerances, thereby reducing the variety of types; — by standardizing the specifications and removing barriers to trade; — by establishing an agreed designation for item orders. This part of ISO 11151 covers planar, piano-spherical and spherical substrates, lenses and optical components that are designed specifically as standardized optical components normally offered via catalogue from suppliers and intended for use with lasers. This part of ISO 11151 includes component descriptions, materials employed, physical dimensions and manufacturing tolerances (including surface finish, figure and parallelism). Although most, but not all of these components will be coated (fully reflecting, partially reflecting or anti-reflecting) before incorporation into the laser system, this part of ISO 11151 does not include recommendations for the specification of coatings. NOTE For optical components used in the ultra-violet, visible and near infrared spectral ranges (190 nm to 2 100 nm), refer to ISO 11151-1. For the specification and testing of optical coatings, refer to the ISO 9211 series.

Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range

BS EN ISO 11254-1:2000 激光和激光相关设备.光表面激光导致损伤阈的测定.1-on-1试验

This part of ISO 11254 specifies a test method for determining the single-shot laser radiation-induced damage threshold (LIDT) of optical surfaces. This test procedure is applicable to all combinations of different laser wavelengths and pulse lengths. However comparison of laser damage threshold data may be misleading unless the measurements have been carried out at identical wavelengths, pulse lengths and beam diameters. Application of this part of ISO 11254 is provisionally restricted to irreversible damage of optical surfaces. NOTE Examples of units and scaling of laser-induced damage thresholds are given in annex C. WARNING —The extrapolation of damage data can lead to inaccurate or wrong calculated results and to an overestimation of the LIDT. In the case of toxic materials (e.g. ZnSe, GaAs, CdTe, ThF4, chalcogenldes, Be, Cr, Ni) this could lead to severe health hazards.

Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - 1-on-1 test

EN ISO 11151-1:2000 激光和激光相关设备.标准光学元件.第1部分:紫外线、可视及近红外线光谱范围的组成

This part of IS0 11 151 specifies requirements for laser components used in the near ultra-violet, visible and near infrared spectral ranges, from wavelengths 190 nm to 2 100 nm, and facilitates the supply of spare parts - by specifying preferred dimensions and tolerances, thereby reducing the variety of types; - by standardizing the specifications and removing barriers to trade; - by establishing an agreed designation for item orders. This part of IS0 11 151 covers planar, plano-spherical and spherical substrates, lenses and optical components that are designed specifically as standardized optical components normally offered via catalogue from suppliers and intended for use with lasers. This pari of IS0 11 151 includes component descriptions, materials employed, physical dimensions and manufacturing tolerances (including surface finish, figure and parallelism). Although most, but not all, of these components are coated (fully reflecting, partially reflecting or anti-reflecting) before incorporation into the laser system, this part of IS0 11 151 does not include recommendations for the specification of coatings. NOTE For optical components used in the infrared spectral range (> 2 100 nm), refer to IS0 11 151-2. For the specification and testing of optical coatings, refer to the IS0 921 1 series.

Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared Spectral Ranges ISO 11151-1: 2000

IEC TS 60825-7:2000 激光产品的安全 第7部分:发出红外光辐射产品的安全，专用于无线“大气”数据传输和监视者

Safety of laser products - Part 7: Safety of products emitting infrared optical radiation, exclusively used for wireless "free air" data transition and surveillance

ISO 11254-1:2000 激光和激光设备 光学表面激光导致损伤阈值的测定 第1部分:1-on-1试验

This part of ISO 11254 specifies a test method for determining the single-shot laser radiation-induced damage threshold (LIDT) of optical surfaces. This test procedure is applicable to all combinations of different laser wavelengths and pulse lengths. However comparison of laser damage threshold data may be misleading unless the measurements have been carried out at identical wavelengths, pulse lengths and beam diameters. Application of this part of ISO 11254 is provisionally restricted to irreversible damage of optical surfaces. NOTE Examples of units and scaling of laser-induced damage thresholds are given in annex C. WARNING — The extrapolation of damage data can lead to inaccurate or wrong calculated results and to an overestimation of the LIDT. In the case of toxic materials (e.g. ZnSe, GaAs, CdTe, ThF4, chalcogenides, Be, Cr, Ni) this could lead to severe health hazards.

Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test

ISO 11151-1:2000 激光和激光设备 标准光学元件 第1部分:紫外线、可见和近红外光谱范围用元件

This part of ISO 11151 specifies requirements for laser components used in the near ultra-violet, visible and near infrared spectral ranges, from wavelengths 190 nm to 2 100 nm, and facilitates the supply of spare parts — by specifying preferred dimensions and tolerances, thereby reducing the variety of types; — by standardizing the specifications and removing barriers to trade; — by establishing an agreed designation for item orders. This part of ISO 11151 covers planar, piano-spherical and spherical substrates, lenses and optical components that are designed specifically as standardized optical components normally offered via catalogue from suppliers and intended for use with lasers. This part of IS0 11151 includes component descriptions, materials employed, physical dimensions and manufacturing tolerances (including surface finish, figure and parallelism). Although most, but not all, of these components are coated (fully reflecting, partially reflecting or anti-reflecting) before incorporation into the laser system, this part of ISO 11151 does not include recommendations for the specification of coatings. NOTE For optical components used in the infrared spectral range (>2 100nm), refer to ISO 11151-2. For the specification and testing of optical coatings, refer to the ISO 9211 series.

Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges

ISO 11151-2:2000 激光和激光设备 标准光学元件 第2部分:红外光谱范围用元件

This part of ISO 11151 specifies requirements for laser components used in the infrared spectral range, from wavelengths 2,10 μm to 15,0 μm, and facilitates the supply of spare parts: — by specifying preferred dimensions and tolerances, thereby reducing the variety of types; — by standardizing the specifications and removing barriers to trade; — by establishing an agreed designation for item orders. This part of ISO 11151 covers planar, piano-spherical and spherical substrates, lenses and optical components that are designed specifically as standardized optical components normally offered via catalogue from suppliers and intended for use with lasers. This part of IS0 11151 includes component descriptions, materials employed, physical dimensions and manufacturing tolerances (including surface finish, figure and parallelism). Although most, but not all of these components will be coated (fully reflecting, partially reflecting or anti-reflecting) before incorporation into the laser system, this part of ISO 11151 does not include recommendations for the specification of coatings. NOTE For optical components used in the ultra-violet, visible and near infrared spectral ranges (190 nm to 2 100 nm), refer to ISO 11151-1. For the specification and testing of optical coatings, refer to the ISO 9211 series.

Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range

DIN 30965:2000 激光技术.激光束淬透性试验

The modified hardenability test by end quenching is applied for testing the laser beam hardenability of ferrous materials.

Laser engineering - Laser beam hardenability test

ISO 13694:2000 光学和光学仪器 激光和激光设备 激光束能量密度分布的试验方法

This International Standard specifies methods by which the measurement of power [energy] density distribution is made and defines parameters for the characterization of the spatial properties of laser power [energy] density distribution functions at a given plane. The methods given in this International Standard are intended to be used for the testing and characterization of both continuous wave (cw) and pulsed laser beams used in optics and optical instruments.

Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power [energy] density distribution

NF S10-140:1999 光学和光学仪器.激光及其相关设备电磁兼容性.要求和试验

Optics and optical instruments - Lasers and laser-related equipments Electromagnetic compatibility (EMC) - Requirements and tests.

IEC TR 60825-8:1999 激光产品的安全 第8部分:医疗激光设备安全使用指南

This technical report serves as a guide intended to give information to the employer and the USER on the safe use of lasers and laser equipment classified as class 3B or class 4, for diagnostic and therapeutic applications in healthcare facilities. However, particular care should be taken in the use of class 2 and class 3A lasers where the patient's normal aversion response is compromised or absent. This report explains the control measures recommended for the safety of patients, staff, maintenance personnel and others. Engineering controls which form part of the laser equipment or the installation are also briefly described to provide an understanding of the general principles of protection. However, detailed specifications of laser equipment and installation controls are not included in this report, such requirements being separately specified in other standards, e.g. see 1.2. The subject areas covered in this guide include - BEAM DELIVERY SYSTEMS; - biological effects of laser radiation; - reporting of accidents and dangerous situations; - checklists. The object of this report is to enhance the protection of persons from laser radiation and other associated hazards by providing guidance on how to establish safety procedures, precautions and user control measures.

Safety of laser products - Part 8: Guidelines for the safe use of medical laser equipment

IEC TR 60825-9:1999 激光产品的安全 第9部分:非相干光辐射最大允许曝光量的汇集

This Technical Report reconciles current Maximum Permissible Exposure (MPE) values for the exposure of the human eye and skin to incoherent optical radiation from artificial sources in the wavelength range from 180 nm to 3000 nm with the ultimate goal of harmonisation. Exposure limits between 3000 nm and 1 mm wavelength are currently undefined. These values are based on the best available information from experimental studies and should be used only as guides in the control of exposure to radiation from artificial sources and should not be regarded as a precise line between safe and dangerous levels. NOTE The values of this report are applicable to most individuals, however, some individuals may be hypersusceptible or otherwise unusually responsive to optical radiation because of genetic factors, age, personal habits (smoking, alcohol, or other drugs), medication, or previous exposures. Such individuals may not be adequately protected from adverse health effects from exposure to optical radiation at or below the maximum permissible exposure values of this report. Medical advise should be sought to evaluate the extent to which additional protection is needed. These values were mainly developed for exposure to artificial sources. They may also be used for the evaluation of exposure to sunlight. The MPE values should not be applicable to exposure of patients to optical radiation for the purpose of medical treatment. Maximum permissible exposure values for the exposure to radiation from laser sources are defined in IEC 60825-1. NOTE 1 Basic documents of this report were IEC 60825-1 (addressing lasers) and the IRPA/ICNIRP Guidelines (addressing incoherent sources). ACGIH limits are slightly different in wavelength ranges and in limit values. NOTE 2 In spite of the fact that LEDs emit mainly incoherent radiation they are currently dealt with in IEC 60825-1. NOTE 3 There are no damage mechanisms which are known to be different for coherent and incoherent sources. However, in many cases the limit values in IEC 60825-1 are more conservative than the values in this report. This is especially true in wavelength regions where no lasers were available when IEC 60825-1 was originally developed. NOTE 4 Exposures to levels at the MPE values given may be uncomfortable to view or feel upon the skin. NOTE 5 In the UV-B and UV-C spectral ranges the MPE values approach the radiant exposures producing minimally detectable biological changes in the surface corneal cells. Levels producing harmful effects are 2 to 3 times greater. 1 The object of this technical report is to provide guidance for the protection of persons from incoherent optical radiation in the wavelength range from 180 nm to 1 mm by indicating safe levels of optical radiation which are believed to be safe for most individuals in the sense that exposure at or below these levels will create no adverse effects. Because only limited knowledge exists about the effects of a long-term exposure, most MPEs are based on acute effects of the optical radiation exposure during an eigth hours work day. 2 To provide procedures and methods how the level of optical radiation should be measured and evaluated for the purpose of comparison with the maximum permissible exposure.

Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation

JB/T 9491-1999 氦氖激光器主要参数测试方法

　　本标准规定了氦氖激光器常用光电参数的测试方法。 　　本标准适用于输出连续波波长为632.8nm的氦氖激光器。

Measuring mathod of major parameter for He-Ne lasers

JB/T 9489-1999 氩离子激光器主要参数测试方法

　　本标准规定了氩离子激光器常用光电参数的测试方法。 　　本标准适用于连续波输出的氩离子激光器。

Measuring mathod of major parameter for argon ion lasers

JB/T 9490-1999 二氧化碳激光器主要参数测试方法

　　本标准规定了二氧化碳激光器常用光电参数的测试方法。 　　本标准适用于连续工作的封离型二氧化碳激光器。

Meauring mathod of major parameter for CO2 lasers

JB/T 9492-1999 钇铝石榴石激光器参数系列

　　本标准规定了钇铝石榴石激光器的常用参数值。 　　本标准适用于通用的钇铝石榴光器。

Series of parameters for Nd:YAG lasers

ISO 11670:1999 激光和激光设备 激光束参数的试验方法 束定位稳定性

Laser and laser-related equipment - Test methods for laser beam parameters - Beam positional stability

IEC TS 60825-6:1999 激光产品的安全 第6部分:有光源产品的安全, 专用于将可见信息传到人眼者

Safety of laser products - Part 6: Safety of products with optical sources, exclusively used for visible information transmission to the human eye

ISO 11146:1999 激光和激光设备 激光束参数的试验方法 束宽、发散角和束扩散因子

Laser and laser-related equipment - Test methods for laser beam parameters - Beam widths, divergence angle and beam propagation factor