L64 数据媒体 标准查询与下载

JIS X 6323-1:2011 识别卡.无触点集成电路卡.近程卡.第1部分:物理特性

Identification cards -- Contactless integrated circuit cards -- Vicinity cards -- Part 1: Physical characteristics

JIS X 6323-2:2011 识别卡.无触点集成电路卡.近程卡.第2部分:空中接口和初始化

Identification cards -- Contactless integrated circuit cards -- Vicinity cards -- Part 2: Air interface and initialization

BS ISO/IEC 10373-9:2011 身份证.试验方法.光学存储卡.全息记录方法

Identification cards. Test methods. Optical memory cards. Holographic recording method

ISO/IEC 10373-9:2011 标示卡.试验方法.第9部分:光学存储卡.全息记录方法

Identification cards - Test methods - Part 9: Optical memory cards - Holographic recording method

BS ISO/IEC 12905:2011 集成电路卡.使用持卡者优先权接口的增强型终端可访性

Integrated circuit cards. Enhanced terminal accessibility using cardholder preference interface

ISO/IEC 12905:2011 集成电路卡.使用持卡者优先权接口的增强型终端可访性

Integrated circuit cards - Enhanced terminal accessibility using cardholder preference interface

JIS X 6302-6:2011 识别卡.记录技术.第6部分:磁条.高矫顽磁性

Identification cards -- Recording technique -- Part 6: Magnetic stripe -- High coercivity

ISO/IEC 10995:2011 信息技术.信息交换和储存用数字记录媒介.光学媒介档案寿命的评估用试验方法

Information technology - Digitally recorded media for information interchange and storage - Test method for the estimation of the archival lifetime of optical media

BS ISO/IEC 14443-3:2011+A2:2012 识别卡.无触点集成电路卡.感应卡.初始化和防碰撞

Identification cards. Contactless integrated circuit cards. Proximity cards. Initialization and anticollision

JIS X 6195:2011 信息处理的连续格式

Continuous forms for information processing

JIS X 6255:2011 信息技术.信息储存用数字记录介质.DVD-R,DVD-RW,DVD-RAM,+R和+RW光盘用数据迁移方法

Information technology -- Digitally recorded media for information storage -- Data migration method for DVD-R, DVD-RW, DVD-RAM, +R, and +RW disks

JIS X 6319-3:2011 集成电路卡用仪器规范.第3部分:交换的共同指令

Specification of implementation for integrated circuit(s) cards -- Part 3: Common commands for interchange

JIS X 6322-1:2011 识别卡.无触点集成电路卡.感应卡.第1部分:物理特性

Identification cards -- Contactless integrated circuit cards -- Proximity cards -- Part 1: Physical characteristics

ISO/IEC 12862:2011 信息技术.120 mm(每面8,54 G字节)与80 mm(每面2,66 G字节)DVD双层可记录光盘(DL的DVD-R)

This International Standard specifies the mechanical, physical and optical characteristics of a 120 mm and an 80 mm dual layer DVD recordable disk to enable the interchange of such disks. It specifies the quality of the pre-recorded, unrecorded and recorded signals, the format of the data, the format of the information zone, the format of the unrecorded zone, and the recording method, thereby allowing for information interchange by means of such disks. This disk is identified as a DVD recordable disk for dual layer (DVD-R for DL). This International Standard specifies the following: - 120 mm and 80 mm nominal diameter disks that can be either single- or double-sided; - the conditions for conformance; - the environments in which the disk is to be operated and stored; - the mechanical and physical characteristics of the disk, so as to provide mechanical interchange between data processing systems; - the format of the pre-recorded information on an unrecorded disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method used; - the format of the data and the recorded information on the disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method used; - the characteristics of the signals from pre-recorded and unrecorded areas on the disk, enabling data processing systems to read the pre-recorded information and to write to the disks; - the characteristics of the signals recorded on the disk, enabling data processing systems to read the data from the disk. This International Standard provides for interchange of disks between disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.

Information technology - 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD recordable disk for dual layer (DVD-R for DL)

BS ISO/IEC 24727-5:2011 识别卡.集成电路卡程序设计接口.测试规程

Identification cards. Integrated circuit card programming interfaces. Testing procedures

BS ISO/IEC 10373-8:2011 识别卡.试验方法.USB-ICC

Identification cards. Test Methods. USB-ICC

ISO/IEC 14443-3:2011 识别卡.无接触点集成电路卡.近程卡.第3部分:初始化和防碰撞

This part of ISO/IEC 14443 describes: - polling for proximity cards or objects (PICCs) entering the field of a proximity coupling device (PCD); - the byte format, the frames and timing used during the initial phase of communication between PCDs and PICCs; - the initial Request and Answer to Request command content; - methods to detect and communicate with one PICC among several PICCs (anticollision); - other parameters required to initialize communications between a PICC and PCD; - optional means to ease and speed up the selection of one PICC among several PICCs based on application criteria. Protocol and commands used by higher layers and by applications and which are used after the initial phase are described in ISO/IEC 14443-4. This part of ISO/IEC 14443 is applicable to PICCs of Type A and of Type B (as described in ISO/IEC 14443-2). NOTE 1 Part of the timing of data communication is defined in ISO/IEC 14443-2. NOTE 2 Test methods for this International Standard are defined in ISO/IEC 10373-6.

Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision

BS ISO/IEC 7816-1:2011 识别卡 集成电路卡 带触点卡 物理特征

Identification cards. Integrated circuit cards. Cards with contacts. Physical characteristics

ISO/IEC 10373-8:2011 识别卡.测试方法.第8部分:USB-ICC

This part of ISO/IEC 10373 describes a Test Methodology and a list of Test Scenarios to evaluate the compliance of a card with ISO/IEC 7816-12. Specifically, this part of ISO/IEC 10373: - addresses USB 2.0 physical layer measurements and electrical compliance testing; - discusses issues relative to the Test Tools to analyse USB bus traffic and provides guidance for the Test Scenarios given in this part of ISO/IEC 10373; - proposes a classification of Test Scenarios given in this part of ISO/IEC 10373, along with validation criteria; - discusses Test Cases for compliance with the USB CCID Class Device. NOTE Compliance means cards that are called USB-ICC products are designed to match the description in ISO/IEC 7816-12.

Identification cards - Test methods - Part 8: USB-ICC

ISO/IEC 24727-5:2011 识别卡.集成电路卡编程接口.第5部分:检验规程

ISO/IEC 24727 is a set of programming interfaces for interactions between integrated circuit cards and external applications to include generic services for multi-sector use. This part of ISO/IEC 24727 specifies conformance testing procedures designed to determine if interfaces developed with the ISO/IEC 24727 series meet the requirement of ISO/IEC 24727. By conforming to this part of ISO/IEC 24727, interoperable implementations of ISO/IEC 24727 can be realized. Test procedures for ISO/IEC 24727-2, ISO/IEC 24727-3 and ISO/IEC 24727-4 are described with sufficient detailing in support of ISO/IEC 24727 interoperability requirements, i.e. the connectivity, ISO/IEC 24727 security mechanisms and discovery mechanisms between the client-application and the card-application. This part of ISO/IEC 24727 defines calls on ISO/IEC 24727-3 in an ordered sequence. It also defines the confirmation of integrity of transmitted data by an implementation under test, as well as the syntax of that data received from the implementation under test for the marshalling procedures defined in ISO/IEC 24727-3 and ISO/IEC 24727-4. For each test procedure, the conditions required for its execution are defined, along with the conditions under which it has to be executed and the expected results. Structures and entities used for the tests, as well as a common set of recurring sequences used for the various procedures, are identified and documented in this part of ISO/IEC 24727.

Identification cards - Integrated circuit card programming interfaces - Part 5: Testing procedures