L64 数据媒体 标准查询与下载
共找到 1963 条与 数据媒体 相关的标准，共 131 页
本标准规定了移动硬盘环境标志产品的术语和定义、基本要求、技术内容和检验方法。 本标准适用于移动硬盘产品。
Technical requirement for environmental labeling products -Mobile hard disk drive
- ICS
- CCS
- L64
- 发布
- 2011-03-02
- 实施
- 2011-04-01
ECC part 3 will provide an Interoperability Model, which will enable an serevice compliant with technical requiements, to interoperate with different implementations of the European Citizen Card.
Identification card systems - European Citizen Card - Part 3: European Citizen Card Interoperability using an application interface; English version CEN/TS 15480-3:2010
- ICS
- 35.240.15
- CCS
- L64
- 发布
- 2011-03
- 实施
Information technology. Identification cards. On-card biometric comparison
- ICS
- 35.240.15
- CCS
- L64
- 发布
- 2011-02-28
- 实施
- 2011-02-28
Identification cards. Integrated circuit card programming interfaces. Registration authority procedures for the authentication protocols for interoperability
- ICS
- 35.240.15
- CCS
- L64
- 发布
- 2011-02-28
- 实施
- 2011-02-28
Identification cards. Test methods. Proximity cards
- ICS
- 35.240.15
- CCS
- L64
- 发布
- 2011-02-28
- 实施
- 2011-02-28
This part of ISO/IEC 7816 specifies the physical characteristics of integrated circuit cards with contacts. It applies to identification cards of the ID-1 card type, which can include embossing and/or a magnetic stripe and/or tactile identifier mark as specified in ISO/IEC 7811. Test methods are specified in ISO/IEC 10373-1. This part of ISO/IEC 7816 applies to cards which have a physical interface with electrical contacts. It does not, however, define the nature, number and position of the integrated circuits in the cards.
Identification cards - Integrated circuit cards - Part 1: Cards with contacts - Physical characteristics
- ICS
- 35.240.15
- CCS
- L64
- 发布
- 2011-02-15
- 实施
- 2011-02-15
Identification card systems. European citizen card. European citizen card interoperability using an application interface
- ICS
- 35.240.15
- CCS
- L64
- 发布
- 2011-01-31
- 实施
- 2011-01-31
Information technology -- Data interchange on 90 mm optical disk cartridges -- Capacity: 1.3 Gbytes per cartridge
- ICS
- 35.220.30
- CCS
- L64
- 发布
- 2011-01-20
- 实施
Information technology -- Data interchange on 130 mm magneto-optical disk cartridges -- Capacity: 9.1 Gbytes per cartridge
- ICS
- 35.220.30
- CCS
- L64
- 发布
- 2011-01-20
- 实施
Information technology -- Data interchange on 90 mm optical disk cartridges -- Capacity: 2.3 Gbytes per cartridge
- ICS
- 35.220.30
- CCS
- L64
- 发布
- 2011-01-20
- 实施
ISO/IEC 10373 defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. Each test method is cross-referenced to one or more base standards, which can be ISO/IEC 7810 or one or more of the supplementary standards that define the information storage technologies employed in identification card applications. NOTE 1 Criteria for acceptability do not form part of ISO/IEC 10373, but will be found in the International Standards mentioned above. NOTE 2 Test methods defined in this part of ISO/IEC 10373 are intended to be performed separately. A given proximity card or object, or proximity coupling device, is not required to pass through all the tests sequentially. This part of ISO/IEC 10373 defines test methods which are specific to proximity cards and objects, and proximity coupling devices, defined in ISO/IEC 14443-1:2008, ISO/IEC 14443-2:2010, ISO/IEC 14443-3:— and ISO/IEC 14443-4:2008. ISO/IEC 10373-1 defines test methods which are common to one or more integrated circuit card technologies and other parts deal with other technology-specific tests.
Identification cards - Test methods - Part 6: Proximity cards
- ICS
- 35.240.15
- CCS
- L64
- 发布
- 2011-01-15
- 实施
- 2011-01-15
ISO/IEC 10373 defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810.
Identification cards - Test methods - Part 6: Proximity cards
- ICS
- 35.240.15
- CCS
- L64
- 发布
- 2011-01-01
- 实施
This part of ISO/IEC 7812 specifies a numbering system for the identification of issuers of cards that require an issuer identification number (IIN) to operate in international, interindustry and/or intra-industry interchange.
Identification cards - Identification of issuers - Part 1: Numbering system
- ICS
- 35.240.15
- CCS
- L64
- 发布
- 2011-01-01
- 实施
Protocol and commands used by higher layers and by applications and which are used after the initial phase are described in ISO/IEC 14443-4.
Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision
- ICS
- 35.240.15
- CCS
- L64
- 发布
- 2011-01-01
- 实施
Identification of Location Entities for Information Exchange
- ICS
- 33.040.20
- CCS
- L64
- 发布
- 2011
- 实施
Identification cards - Integrated circuit cards - Part 4: Organization, security and commands for interchange; AMENDMENT 1: Record activation and deactivation
- ICS
- 35.240.15
- CCS
- L64
- 发布
- 2011
- 实施
ISO/IEC 24775:2011(E) defines an interface for the secure, extensible, and interoperable management of a distributed and heterogeneous storage system. This interface uses an object-oriented, XML-based, messagingbased protocol designed to support the specific requirements of managing devices and subsystems in this storage environment. Using this protocol, this International Standard describes the information available to a WBEM Client from an SMI-S compliant CIM WBEM Server. This second edition cancels and replaces the first edition published in 2007 and constitutes a technical.
Information technology - Storage management
- ICS
- 35.220.01
- CCS
- L64
- 发布
- 2011
- 实施
Identification cards - Integrated circuit cards - Part 15: Cryptographic information application; AMENDMENT 1: Examples of the use of the cryptographic information application
- ICS
- 35.240.15
- CCS
- L64
- 发布
- 2011
- 实施
Identification cards - Integrated circuit cards - Part 15: Cryptographic information application - Amendment 2: Error corrections and extensions for multi-application environments
- ICS
- 35.240.15
- CCS
- L64
- 发布
- 2011
- 实施
ISO/IEC 24709-3:2011 defines a number of test assertions written in the assertion language specified in ISO/IEC 24709-1:2007. These assertions enable a user of ISO/IEC 24709-3:2011 (such as a testing laboratory) to test the conformance to ISO/IEC 19784-1 (BioAPI 2.0) of any BioAPI Framework that claims to be a conforming implementation of ISO/IEC 19784-1. Each test assertion specified in ISO/IEC 24709-3:2011 exercises one or more features of an implementation under test.
Information technology - Conformance testing for the biometric application programming interface (BioAPI) - Part 3: Test assertions for BioAPI frameworks
- ICS
- 35.240.15
- CCS
- L64
- 发布
- 2011
- 实施
