L64 数据媒体 标准查询与下载

BS EN 14890-1:2008 用作安全签名创建装置的智能卡的应用接口.基础服务

Part 1 of this series specifies the application interface to Smart Cards during the usage phase, used as Secure Signature Creation Devices (SSCD) according to the Terms of the European Directive on Electronic Signature 1999/93 to enable interoperability and usage as SSCD on a national or European level. This document describes the mandatory services for the usage of Smart Cards as SSCDs based on CEN CWA 14890 (all parts). This covers the signing function, storage of certificates, the related user verification, establishment and use of trusted path and channel, requirements for key generation and the allocation and format of resources required for the execution of those functions and related cryptographic token information. Thereby the functionality of CWA 14890-1 is enhanced in the following areas: ? Device authentication with Elliptic Curves (ELC) for existing asymmetric authentication protocols (RSA Transport, Privacy Protocol), ? Enhancement of existing asymmetric authentication protocols due to privacy and non-traceability constraints, ? Card Verifiable (CV) Certificate Formats (self descriptive) with ELC for all types of authentication and authorization protocols, ? Secure Messaging Tags and use of commands with Odd-INS Code in compliance to the actual ISO/IEC 7816-4, ? Further hash algorithms (SHA2–family) with corresponding Object identifier and Algorithm references, ? Use of AES in authentication protocols, ? Use of AES for secure messaging. The following items are out of scope: 1) The physical, electrical and transport protocol characteristics of the card, 2) The external signature creation process and signature environment, 3) The elements required to verify an electronic signature produced by a card used as a SSCD, 4) The error handling process.

Application interface for smart cards used as secure signature creation devices - Part 1: Basic services

ANSI/INCITS/ISO/IEC 11693:2009 信息技术.识别卡.光存储卡.一般特性

ISO/IEC 11693:2005 is one of a series of standards describing the parameters for optical memory cards and the use of such cards for the storage and interchange of digital data. It recognizes the existence of different methods for recording and reading information on optical memory cards, the characteristics of which are specific to the recording method employed. In general, these different recording methods will not be compatible with each other. The optical memory card standards are structured to accommodate the inclusion of existing and future recording methods in a consistent manner and ISO/IEC 11693:2005 is generic to all.

Information technology - Identification cards - Optical memory cards - General characteristics

ANSI/INCITS/ISO/IEC 17341:2009 信息技术.用+RW格式120 mm和80 mm光盘的数据交换.容量:每面4.7 Gbytes和1.46 Gbytes(刻录速度小于4X)

ISO/IEC 17341:2009 specifies the mechanical, physical and optical characteristics of 120 mm rewritable optical disks with capacities of 4,7 Gbytes and 9,4 Gbytes. It specifies the quality of the recorded and unrecorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. The data can be written, read and overwritten many times using the phase change method. These disks are identified as +RW.

Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 4X)

ANSI/INCITS/ISO/IEC 17344:2009 信息技术.+R格式120 mm和80 mm光盘上的数据交换.容量:每面4.7 Gbytes和1.46 Gbytes(刻录速度截至16X)

ISO/IEC 17344:2009 specifies the mechanical, physical and optical characteristics of 120 mm recordable optical disks with capacities of 4,7 Gbytes and 9,4 Gbytes. It specifies the quality of the recorded and unrecorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. The data can be written once and read many times using a non-reversible method. These disks are identified as +R.

Information technology - Data interchange on 120 mm and 80 mm optical disk using +R format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 16X)

ASME STP-SA-030-2009 FEM储存/检索机器的对比.ASME B30.13规范的文档

This report evaluates variances between Federation Europeenne de la Manutention (FEM) Automated Storage and Retrieval System (ASRS) standards, and the ASME B30.13 specification. It provides a broad perspective on the major differences between the FEM and ASME standards that can be used for consideration to maintain the technical relevance of ASME Codes and Standards products. The document compares thirteen FEM ASRS documents to the ASME B30.13 specification.

COMPARISON OF FEM STORAGE/RETRIEVAL MACHINE DOCUMENTS TO THE ASME B30.13 SPECIFICATION

ANSI/INCITS/ISO/IEC 29121:2009 信息技术.信息交换和存储数字记录介质.DVD-R,DVD-RW,DVD-RAM,+R和+RW光盘的数据迁移方法

ISO/IEC 29121:2009 provides specifications of the data migration method for archival data storage which allow manufacturers storage systems that use DVD-R (ISO/IEC 23912:2005), DVD-RW (ISO/IEC 17342:2004), DVD-RAM (ISO/IEC 17592:2004), +R (ISO/IEC 17344:2006 and ISO/IEC 25434:2007), and +RW (ISO/IEC 17341:2006 and ISO/IEC 26925:2006) disks for information storage to classify disk longevity potential on the basis of initial performance requirements and to allow users to monitor continuing conformance with the error limits required for its class identified by the manufacturer of the drive/disk.

Information technology - Digitally recorded media for information interchange and storage - Data migration method for DVD-R, DVD-RW, DVD-RAM, +R and +RW disks

ASTM E2674-09 评估移动数据存储设备(MDSD)损失造成影响的标准实施规程

This practice establishes a standard impact assessment methodology to enable entities to uniformly ascertain and communicate impact levels associated with the potential loss of MDSDs. This practice is not intended to prescribe specific information security policies for entities or organizations. This practice assumes that individuals and entities are following all relevant information security policies as required by federal or state law, the terms of applicable government contracts, specific agency policies such as the National Industrial Security Program Operating Manual (NISPOM), and entity-specific policies. This practice assumes, but does not require, that entities have devised and are maintaining a system of internal controls over MDSDs in accordance with the section on Management of Property of Practice E 2279. This practice assumes, but does not require, that the results of this impact assessment will inform future actions and help entities determine cost-effective property control measures for MDSDs commensurate with the potential consequences of their loss in accordance with the section on Management of Property of Practice E 2279. This practice encourages an inclusive understanding and communication of the risk associated with MDSDs and, by assigning a rating to the impact of loss, enables comparisons on this basis to other MDSDs rated using the same practice. This practice is intended to foster and enable additional standard practices related to or based on these terms and concepts.1.1 This practice describes a methodology for assessing and quantifying the impact of the loss of mobile data storage devices (MDSDs), for example, thumb drives, auxiliary hard drives, and other property containing personally identifiable information or other entity sensitive information. 1.2 This practice is based on two concepts: 1.2.1 Identifying the MDSDs that pose the greatest risk to the organization based on both the information that is stored on them and the location in which they are used, and 1.2.2 Determining the impact of the potential loss of specific MDSDs. In general, this impact assessment is best practiced as a part of a larger risk management process. While this practice does not address this larger topic, it may inform other risk management standards. 1.3 This practice is intended to be applicable and appropriate for all asset-holding entities. 1.4 In accordance with the provisions of Practice E 2279, this practice clarifies and enables effective and efficient control and tracking of equipment. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Assessment of Impact of Mobile Data Storage Device (MDSD) Loss

ASTM E1453-09 包含模拟或数字X射线检验数据介质的存储标准规范

The provisions of this guide are intended to control and maintain the quality of recorded industrial electronic data from radioscopy and unrecorded magnetic and optical media only, and are not intended to control the acceptability of the materials or products examined. It is further intended that this guide be used as an adjunct to Guide E 1000 and Practice E 1255. The necessity for applying specific control procedures such as those described in this guide is dependent to a certain extent, on the degree to which the user adheres to good recording and storage practices as a matter of routine procedure.1.1 This guide may be used for the control and maintenance of recorded and unrecorded magnetic and optical media of analog or digital electronic data from industrial radioscopy. 1.2 The values stated in inch-pound units are to be regarded as standard. The SI units given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 6.

Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data

ANSI/IEEE 2600.3:2009 IEEE标准2600-2800运行环境C中硬拷贝设备的标准保护轮廓

Standard for a Protection Profile for Hardcopy Devices in a public-facing environment in which document security is not guaranteed, but access control and usage accounting are important to the operator of the environment. A retail copy center, public library, Internet café, and hotel business center are typical applications of this environment.

Standard Protection Profile for Hardcopy Devices in IEEE Std. 2600-2008 Operational Environment C

ANSI/INCITS/ISO/IEC 26925:2009 信息技术.利用+RW HS 格式的 120 mm 和 80 mm光盘上的数据交换.容量: 分别为 4,7 Gbytes 和 1,46 Gbytes 一侧(记录速度 8X)

ISO/IEC 26925:2009 specifies the mechanical, physical and optical characteristics of 120 mm rewritable optical disks with capacities of 4,7 Gbytes and 9,4 Gbytes. It specifies the quality of the recorded and unrecorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. The data can be written, read and overwritten many times using the phase change method. These disks are identified as +RW HS (High Speed).

Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW HS format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed 8X)

ANSI/INCITS/ISO/IEC 29642:2009 信息技术.使用+RW DL格式进行120 mm和80 mm光盘上的数据交换.容量:每面8.55 Gbytes和2.66 Gbytes(刻录速度2.4x)

ISO/IEC 29642:2009 specifies the mechanical, physical and optical characteristics of 120 mm rewritable optical disks with capacities of 8,55 Gbytes and 17,1 Gbytes. It specifies the quality of the recorded and unrecorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. The data can be written, read and overwritten many times using the phase change method. These disks are identified as +RW DL.

Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW DL format - Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed 2,4X)

ANSI/IEEE 2600.2:2009 IEEE标准2600-2800运行环境B中硬拷贝设备的标准保护轮廓

Standard for a Protection Profile for Hardcopy Devices in a commercial information processing environment in which a moderate level of document security, network security, and security assurance, are required. Typically, the day-to-day proprietary and nonproprietary information needed to operate an enterprise will be handled by this environment.

Standard Protection Profile for Hardcopy Devices in IEEE Std. 2600-2008 Operational Environment B

ANSI/INCITS/ISO/IEC 11694-1:2009 信息技术.识别卡.光存储卡.线性记录法.第1部分:物理特性

ISO/IEC 11694 recognizes the existence of different methods of recording and reading information on optical memory cards, the characteristics of which are specific to the recording method employed. ISO/IEC 11694-1:2005 is specific to optical memory cards using the linear recording method. It defines the physical characteristics and the extent of compliance with, addition to and/or deviation from the relevant base document ISO/IEC 11693.

Information technology - Identification cards - Optical memory cards - Linear recording method - Part 1: Physical characteristics

ANSI/INCITS/ISO/IEC 12862:2009 信息技术.120 mm(每侧 8,54 Gbytes)和80 mm(每侧 2,66 Gbytes)双层 DVD 可记录盘(双侧可记录式 DVD)

ISO/IEC 12862:2009 specifies the mechanical, physical and optical characteristics of a 120 mm and an 80 mm dual layer DVD recordable disk to enable the interchange of such disks. It specifies the quality of the pre-recorded, unrecorded and the recorded signals, the format of the data, the format of the information zone, the format of the unrecorded zone, and the recording method, thereby allowing for information interchange by means of such disks. This disk is identified as a DVD recordable disk for dual layer (DVD-R for DL).

Information technology - 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD recordable disk for dual layer (DVD-R for DL)

ANSI/INCITS/ISO/IEC 11694-2:2009 信息技术.身份证.光存储卡.线性记录法.第2部分:可访问区域的尺寸规格和位置

ISO/IEC 11694 recognizes the existence of different methods of recording and reading information on optical memory cards, the characteristics of which are specific to the recording method employed. ISO/IEC 11694-2:2005 is specific to optical memory cards using the linear recording method. It defines the dimensions and location of the accessible optical area and the extent of compliance with, addition to and/or deviation from the relevant base document ISO/IEC 11693.

Information technology - Identification cards - Optical memory cards - Linear recording method - Part 2: Dimensions and location of the accessible optical area

ANSI/INCITS/ISO/IEC 7501-3:2009 信息技术.识别卡.机器可读旅行文件.第3部分:机器可读官方旅行文件

ISO/IEC 7501-3:2005 is a short form endorsement of the International Civil Aviation Organization (ICAO) Document Doc 9303 Part 3 - Size-1 and Size-2 Machine Readable Official Travel Documents. ICAO Doc 9303 Part 3 specifies generic formats and minimum data elements for visual inspection and machine reading of official travel documents in the ID-1 and ID-2 card formats containing standardized, globally interoperable machine readable optical character recognition (OCR) data, which may at the option of Governments, be accepted in lieu of a passport as defined in Annex 9 (Chapter 3, paragraph 3.4) to the Convention on International Civil Aviation year 1946 (as revised).

Information technology - Identification cards - Machine readable travel documents - Part 3: Machine readable official travel documents

BS EN 14890-2:2008 用作安全签名创建装置的智能卡的应用接口.附加服务

Part 2 of this series contains Identification, Authentication and Digital Signature (IAS) services in addition to the SSCD services already described in Part 1 to enable interoperability and usage for IAS on a national or European level. This part describes additional functionality to support generic Identification, Authentication and Digital Signature (IAS) services. It contains the functionality of Part 2 of CEN CWA 14890. This covers key decipherment and client (card holder) server authentication, signature verification and related cryptographic token information. ? Additionally this document is enhanced in respect to ? Client-Server (C/S) Authentication Protocols with ELC and their description in DF.CIA ? Identity management on base of C/S Authentication ? Card capability description and Application Capability Description The following items are out of scope: 1. The physical, electrical and transport protocol characteristics of the card, 2. The error handling process.

Application Interface for smart cards used as Secure Signature Creation Devices - Part 2: Additional Services

BS ISO/IEC 24727-2:2008 识别卡.集成电路卡程序设计接口.通用卡接口

Identification cards - Integrated circuit card programming interfaces - Generic card interface

BS ISO/IEC 11695-2:2008 识别卡.光学存储卡.全息记录方法.可到达光学区域的尺寸和位置

Identification cards - Optical memory cards - Holographic recording method - Dimensions and location of accessible optical area

BS ISO/IEC 24727-2:2008+A1:2014 识别卡.集成电路卡程序设计接口.通用卡接口

Identification cards. Integrated circuit card programming interfaces. Generic card interface