L65 系统设备接口 标准查询与下载

CWA 13849-1-2000 ActiveXFS接口规范.ActiveXFS通用目标接口规范

The purpose of this document is to specify the interfaces provided by all ActiveXFS controls. ActiveXFS controls are COM objects written to the XFS 2.0 interface which expose device functionality in a manner which is readily usable by Rapid Application Development tools, including scripting languages.

ActiveXFS interface specification. ActiveXFS common object interface specification

CWA 13849-10-2000 ActiveXFS接口规范.ActiveXFS自动门和指示器目标接口规范

The ActiveSFS XFSSensorIndicator Control provides access to the following funtionality: - Door sensors, such as cabinet, safe or vandal shield doors; - Alarm sensors, such as tamper, seismic or heat sensors; - Generic sensors, such as proximity or ambient light sensors; - Key switch sensors, such as the ATM operator switch; - Lamp/sign indicators, such as fascia light or audio indicators; - Auxiliary indicators.

ActiveXFS interface specification. ActiveXFS sensors doors and indicators object interface specification

CWA 13849-11-2000 ActiveXFS接口规范.ActiveXFS正文终端目标接口规范

A Control is defined for the Text terminal Unit and two automation objects are defined one each to represent forms, fields within forms. The Text Terminal Control exposes the functionality of the text terminal unit by means of properties, methods and events.

ActiveXFS interface specification. ActiveXFS text terminal object interface specification

CWA 13849-12-2000 ActiveXFS接口规范.ActiveXFS夜间安全目标接口规范

The XFSNightSafe Control provides the functionality required for the operation of a Night Safe. This document specifies the following interfaces: Incoming: IXFSNightSafeSpecific, IXFSNightSafeManagement Outgoing: IXFSNightSafeEvents.

ActiveXFS interface specification. ActiveXFS night safe object interface specification

CWA 13849-13-2000 ActiveXFS接口规范.ActiveXFS打印机辅助目标接口规范

This Document defines the auxilliary objects which are common to all printer device classes. The objects in this category are PrintForm, PrintField, PrintMedia, PrintImage, PrintResolution, PrinterReadMediaType, PrinterWriteMediaType Extent and PrintLayOut objects.

ActiveXFS interface specification. ActiveXFS printer auxiliary object interface specification

CWA 13849-2-2000 ActiveXFS接口规范.ActiveXFS卡读取器目标接口规范

This specification defines the properties, methods and events of the ActiveXFS Card Reader Control. This control provides funtionality to operate magnetic stripe and smart card readers/writers. Three automation objects are defined.

ActiveXFS interface specification. ActiveXFS card reader object interface specification

CWA 13849-3-2000 ActiveXFS接口规范.ActiveXFS自动取款机目标接口规范

The Cash Dispenser Control provides an interface, which will enable an application developer to offer business services to the consumer, or management services to a supervisor using the self-service cash dispenser device.

ActiveXFS interface specification. ActiveXFS cash dispenser object interface specification

ANSI/INCITS 336-2000 信息技术.SCSI并行接口-3(SPI-3)(以前为ANSI NCITS 336-2000)

Defines the mechanical, electrical, timing, and protocol requirements of the SCSI parallel interface to allow conforming SCSI devices to inter-operate. The SCSI parallel interface is a local I/O bus that may be operated over a wide range of transfer rates. This standard was originally listed for public review in the March 10, 2000 issue of Standards Action. It is being resubmitted due to substantive changes to the text.

Information Technology - SCSI Parallel Interface-3 (SPI-3) Replaces ANSI NCITS 336-2000

ECA SP4357-A-2000 低压辅助保险丝资格规范.评论截止日期1998年12月16日 ANSI/EIA-722

The current revision of the referenced documents will be that in effect at the date of agreement to the quahfication plan. Subsequent qualification plans will automatically use the latest revisions of these referenced documents.

Low Voltage Supplemental Fuse Qualification Specification Comment Period Expires: November 16, 1998; ANSI/EIA-722

ANSI/INCITS 305 AMD 1-2000 信息技术.SCSI-3 封闭式服务(SES)

Consists of corrections to INCITS 305:1998.

Information Technology - SCSI-3 Enclosure Services (SES)

ECA EIA-448-21A-2000 机电元件的测试标准,用红外系统的机械钎焊的环境影响

The purpose of this standard is to evaluate electromechanical surface mountable components that have been subjected to the environmental effects of machine soldering using an infrared system.

Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using an Infrared System

ECA EIA-448-19A-2000 机电元件的测试标准,用汽相系统的机械钎焊的环境影响

The purpose of this standard is to evaluate electromechanical surface mountable components that have been subjected to the environmental effects of machine soldering using the batch type vapor phase system (that is considered to be more severe than an in

Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using a Vapor Phase System

IEEE 1284-2000 个人计算机用双向平行外围接口的信号发送方法

A signaling method for asynchronous, fully interlocked, bidrectional parallel communications between hosts and printers or other peripherals is defined.

Signaling method for a bidirectional parallel peripheral interface for personal computers

CEA-633.31-1999 电力线物理层一致性规范

This portion of the conformance standard specifies tests to determine conformance of a Node's Power Line (PL) PL Physical Layer to IS-60. Part One of this standard providesan overview of the conformance philosophy. The reader is urged to review that material before attempting to use the details provided in this part. Three subsections under the following Test Specification heading provide Test Cases, Test Steps, and Test Case Dynamic Behavior, respectively. Test Cases are a terse description of each test to be run on a Unit Under Test (UUT). Test Steps are the building blocks for Test Cases. Test Case Dynamic Behavior is the formal expansion of each Test Case, written in the form of a series of Test Steps with a Pass or Fail outcome.

Power Line Physical Layer Conformance Specification

ISO/IEC 14776-411:1999 信息技术.第411部分:SCSI-3体系结构模型(SCSI-3 SAM)

This International Standard describes a reference model for the coordination of standards applicable to SCSI-3 I/O systems and a set of common behavioral requirements that are essential for the development of host software and device firmware that can interoperate with any SCSI-3 interconnect or protocol.

Information technology - Part 411: SCSI-3 Architecture Model (SCSI-3 SAM)

ECA EIA-743-1999 单色显象管可使用屏幕尺寸

This document describes the calculation of useable screen dimensions for monochrome display tubes. Worked examples are presented to clari@ the determination of the display dimensions.

Usable Screen Dimensions for Monochrome Display Tubes

EN 1332-1:1999 识别卡系统.人机接口.第1部分:用户接口用设计原理.合并修改件A1-2007年5月

This European Standard defines design principles for card based services that are applicable to any sector (e.g. banking, telecommunications, mass transport, parking, logical access control, physical access control). It also provides recommendations for the operational procedures to be followed when users interact with a card operated device: — in order to enter a system; — whilst using a system; — leaving a system. The purpose of this European Standard is to facilitate user’s interactions with card operated systems by standardizing key components of the user interface. In principle all devices should be physically accessible to all users including those with special needs. How this can be achieved is not within the scope of this standard. In particular, this European Standard will: — aid the user’s interaction with the system through a consistent user interface when entering, navigating and exiting card-based systems; — promote user confidence in card-based systems in general; — promote efficient use of card-based systems; — reduce the possibility of error when the user enters, navigates in or exits the system; — enable those with different levels of ability and comprehension (minors, elderly, visually impaired, foreign language, etc.) and different levels of experience (e.g. first time users) to use card-based systems; — improve the learnability of card-based systems through consistency.

Identification card systems ?Man-machine interface ?Part 1: Design principles for the user interface Incorporating amendment A1: 5/2007

CEA-776.5-1999 CEBus-EIB路由器通信协议－EIB通信协议

The material in this section was supplied by EIBA, the European Installation Bus Association

CEBUS-EIB Router Communications Protocol- The EIB Communications Protocol

CEA-776.4-1999 CEBus-EIB路由器通信协议-CEBus-EIB路由器网络层

The CEBus-EIB Router Network Layer is conceptually divided into several elements, each performing distinct,well-defined services.

CEBUS-EIB Router Communications Protocol- CEBUS-EIB Router Network Layer

CEA-709.4-1999 光纤频道规范

This document, in conjunction with ANSI/EIA-709.1-A Control Network Protocol Specification, defines a complete 7-layer protocol stack for communications on an EIA-709.4 single-fiber (half-duplex) fiber-optic channel. This channel supports communication at 1250 kbps between multiple nodes, each of which consists of a fiber-optic transceiver, a protocol processor, an application processor, a power supply, and application electronics. The single-fiber channel implemented as specified herein allows two nodes to communicate bidirectionally across a single piece of fiber cable -- thus minimizing complexity of the fiber interconnect.

Fiber-Optic Channel Specification