L65 系统设备接口 标准查询与下载

IEEE 595-1982 串行公用通道接口系统(CAMAC)

This standard defines a Serial Highway (SH) system using byte-organized messages, and configured as a unidirectional loop to which are connected a system controller and up to sixty-two CAMAC crate assemblies or other controlled devices.

Serial highway interface system (CAMAC)

ANSI/IEEE 595:1982 串行公共通路接口系统(CAMAC)(计算机自动测量及控制)

This standard defines a Serial Highway (SH) system using byte-organized messages, and configured as a unidirectional loop to which are connected a system controller and up to sixty-two CAMAC crate assemblies or other controlled devices.

Serial Highway Interface System (CAMAC) (Computer Automated Measurement and Control)

GEIA CMB4-2-1981 数字计算机程序的配置识别

The computer program C o n f i g u r a t i o n L i s t i n g (CL) is o n e example of a l i s t i n g of a p p r o v e d p r o d u c t s and documents, s u p p o r t i n g c o n f i g u r a t i o n management, d u r i n g d e v e l o p m e n t of a c o

Configuration Identification for Digital Computer Programs

GEIA CMB4-3-1981 电脑软件图书馆

Computer software libraries are an essential element of a software configuration management (CM) system. However, the term, Itlibrarytt, while commonly used in the world of software, has had no significance in the field of CM until recently. Further, ev

Computer Software Libraries

ECA TEB 24-1981 点亮度和亮度分配上的光栅Dot Alpha-Numeric CRT显示中的脉冲形状的影响

These notes provide means of analyzing the effect of pulse shape on the written spot configuration and its relative brightness in raster-dot displays. The observations noted and the application of the methods described will provide the equipment designer

Effect of Pulse Shape in Raster Dot Alpha-Numeric CRT Presentations on Spot Luminance and Luminance Distribution

GEIA 441-1979 数字控制的运营者接口功能

Operator Interface Functions of Numerical Controls

Operator Interface Functions of Numerical Controls

ANSI X4.6-1979 加法器和计算机的10键键盘

Prescribes the arrangement of the 10 numeric keys, one through zero, for adding and calculating machines of the 10-key type.

10-Key Keyboard for Adding and Calculating Machines

GEIA 431-1976 数控设备和机床间的电气接口

This standard applies to the interconnection of data terminal equipment and numerical control equipment at the tape reader interface. The data terminal would typically be connected to a remote data source/sink such as a computer.

Electrical Interface between Numerical Control and Machine Tools

GEIA 408-1973 数控设备和采用并行二进制数据交换的数据终端设备直接的接口

This standard applies to the interconnection of data terminal equipment and numerical control equipment at the tape reader interface. The data terminal would typically be connected to a remote data source/sink such as a computer.

Interface between Numerical Control Equipment and Data Terminal Equipment Employing Parallel Binary Data Interchange Errata - August 1973

ECA 212-A-1961 电极编号和电极管中单元的命名

This standara gives the system used for numbering electrodes of the same type in multielectrode tubes; and for assigning designations to the units of multiple-unit tubes.

Numbering of Electrodes and Designation of Units in Electron Tubes

ECA 242-1961 电磁延迟线定义.校正板-1961年7月

The definitions in this standard are to be used to derrcribe Electromagnetic Delay Lines used in pulse circuitry.

Definitions for Electromagnetic Delay Lines Correction Sheet - July 1961

ECA 188-1957 自动化要求的标准尺寸系统

This standagd covers the establishment of a series of dimensional systems and nomenclature to serve as a guide in the coordination of equipment design and design of machinery for automatic manufacture.

Automation Requirements, Dimensional System for

ANSI/INCITS 397-1-2005 信息技术.带数据包接口的AT连接-7.第1卷:寄存器传输指令组、本机寄存器组

This volume (ATA/ATAPI-7 V1) contains the command feature sets for ATA. This volume defines structures used by the parallel implementation of ATA and the serial implementation of ATA. The command descriptions are in alphabetical order, with a cross reference by command codes in Annex B.

Information Technology - AT Attachment with Packet Interface - 7 - Volume 1 - Register Delivered Command Set, Logical Register Set (ATA/ATAPI-7 V1)

ANSI/INCITS 397-3-2005 信息技术.带数据包接口的AT连接-7.第3卷:连续传输协议和物理互联(ATA/ATAPI-7 V3)

This volume (ATA/ATAPI-7 V3) contains the requirements for the implementation of the serial transport for ATA. This volume is written in a way that requires an understanding of the parallel transport defined in Volume 2. The serial transport as described in this volume essentially emulates the parallel transport protocols. While this "parallel emulation" is not the only implementation that is possible or necessary, it provides a basis for the reader to leverage prior understanding of ATA. The reader should be aware, however, that parallel emulation is a conceptual convenience and is not a requirement of this standard.

Information Technology - AT Attachment with Packet Interface - 7 - Volume 3 - Serial Transport Protocols and Physical Interconnect (ATA/ATAPI-7 V3)

QJ 1643-1989 数据处理－过程计算机系统与技术过程之间的接口说明

Data processing - Description of the interface between the process computer system and the technical process

ANSI/INCITS 323-1998/AM1-2001 信息技术.高性能并行接口.6400 Mbit/s物理层.修改件1(ANSI NCITS 323-1998的附录)(以前为ANSI NCITS 323-1998/AM 1-2001)

Consists of corrections to NCITS 323:1998.

Information Technology - High-Performance Parallel Interface - 6400 Mbit/s Physical Layer Amendment 1

ANSI/INCITS 305-1998/AM1-2000 信息技术.SCSI-3封闭式设备(SES)

Consists of corrections to INCITS 305:1998

Information Technology - SCSI-3 Enclosure Services (SES)

ANSI/IEEE Std1003.1b:1993 信息技术.可移植操作系统接口(POSIX).第1部分:系统应用程序接口(API).修改件1:实时扩展语言(C语言)

Information technology - Portable operating system interface (POSIX) - Part 1: System application program interface (API); Amendment 1: Realtime extension [C language]

SJ 20153-1992 通道级电源控制接口

Channel level power control interface

QJ 1935-1990 键盘与微型计算机接口

keyboard and microcomputer interface