共找到 1720 条与 通信网编号、信号、接续 相关的标准,共 115 页
Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7); ISDN User Part (ISUP) Version 4 for the International Interface; Part 4: Calling Line Identification Restriction (CLIR) Supplementary Service (V4.2.1; ITU-T Recommendation Q.731, Cl
Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7); ISDN User Part (ISUP) Version 4 for the International Interface; Part 3: Calling Line Identification Presentation (CLIP) Supplementary Service (V4.2.1; ITU-T Recommendation Q.731, C
Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7); ISDN User Part (ISUP) Version 4 for the International Interface; Part 2: ISDN Supplementary Service V4.1.2; ITU-T Recommendation Q.730 (1999) Modified
Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7); ISDN User Part (ISUP) Version 4 for the International Interface; Part 1: Basic Services (V4.2.1; ITU-T Recommendation Q.761 to Q.764 (1999) Modified)
ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis.
Signalling system No. 7 - ISDN user part functional description Amendment 1 Study Group 11
This prepublication is an unedited version of a recently approved Recommendation. It will be replaced by the published version after editing. Therefore, there will be differences between this prepublication and the published version.
Pre-published Stage 3 Description for Call Offering Supplementary Services Using Signalling System No.7: Call Diversion Services Series Q: Switching and Signalling - Specifications of Signalling System No.7 - ISDN Supplementary Services Amendment 1
This amendment contains the modifications to ITU-T 4.732.2-5 in order to accommodate changes being made to the diversion supplementary services dealing with CCBS/CFNR interactions at a diverting exchange and the inclusion of the Global Call Reference inte
Stage 3 Description for Call Offering Supplementary Services Using Signalling System No.7: Call Diversion Services Series Q: Switching and Signalling - Specifications of Signalling System No.7 - ISDN Supplementary Services Study Group 11 [Superseded: ITU-
Integrated Services Digital Network (ISDN); Generic Functional Protocol for the Support of Supplementary Services; Digital Subscriber Signalling System No. One (DSS1) Protocol; Part 2: Protocol Implementation Conformance Statement (PICS) Proforma Specific
Integrated Services Digital Network (ISDN); Generic Functional Protocol for the Support of Supplementary Services; Digital Subscriber Signalling System No. One (DSS1) Protocol; Part 1: Protocol Specification (V1.3.2)
Digital Cellular Telecommunications System (Phase 2+); Full Rate Speech; Transcoding 3GPP TS 06.10 Version 6.2.0 Release 1997
Digital Cellular Telecommunications System (Phase 2+); Comfort Noise Aspects for Full Rate Speech Traffic Channels
Digital Cellular Telecommunications System (Phase 2); Full Rate Speech; Part 2: Transcoding
Digital Cellular Telecommunications System (Phase 2+); Numbering, Addressing and Identification 3GPP TS 03.03 Version 7.6.0 Release 1998
This Recommendation describes the procedures performed by the Signalling Connection Control Part (SCCP) of Signalling System No.7 to provide connection-oriented and connectionless network services, as well as SCCP management services as defined in ITU-T Q.711. These procedures make use of the messages and information elements defined in ITU-T Q.712, whose formatting and coding aspects are specified in ITU-T Q.713.
Signalling connection control part procedures Study Group 11
This Recommendation describes the procedures performed by the Signalling Connection Control Part (SCCP) of Signalling System No.7 to provide connection-oriented and connectionless network services, as well as SCCP management services as defined in ITU-T Q.711. These procedures make use of the messages and information elements defined in ITU-T Q.712, whose formatting and coding aspects are specified in ITU-T Q.713.
Signalling connection control part procedures
This Supplement to ITU-T Q-series Recommendations is a technical report on the signalling transport requirements needed for support narrowband services via broadband transport technologies.Its scope is limited to the signalling transport of the associated protocols at the call control,bearer control and call bearer control needed to provide this capability across an ATM/IP backbone network for Capability Set 2.
Technical Report TRQ.2600: BICC signalling transport requirements – Capability set 1
Access and Terminals (AT); Analogue Access to the Public Switched Telephone Network (PSTN); Protocol over the Local Loop for Display and Related Services; Terminal Equipment Requirements; Part 2: Off-Hook Data Transmission (V1.2.1)
Access and Terminals (AT); Analogue Access to the Public Switched Telephone Network (PSTN); Protocol over the Local Loop for Display and Related Services; Terminal Equipment Requirements; Part 1: On-Hook Data Transmission (V1.2.1)
This Recommendation describes the procedures performed by the Signalling Connection Control Part (SCCP) of Signalling System No. 7 to provide connection-oriented and connectionless network services, as well as SCCP management services as defined in ITU-T
Signalling connection control part procedures Study Group 11
Universal Mobile Telecommunications System (UMTS); AMR Wideband Speech Codec; Feasibility Study Report (3GPP TR 26.901 Version 4.0.1 Release 4)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号