M14 通信网传输系统接口 标准查询与下载

DIN EN 301005-1:2000 在数字服务节点(SN)处的V接口.为支持宽带或宽带和窄带组合接入网络(ANs)在VB5.1参考点的接口.第1部分:接口规范

The document specifies requirements in the telecommunication sector.

V interfaces at the digital Service Node (SN) - Interfaces at the VB5.1 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs) - Part 1: Interface specification (Endorsement of the English version EN 301005

ANSI/INCITS TR 26-2000 信息技术.光纤信道.高速并行接口

Information Technology Fibre Channel High Speed Parallel Interface

ANSI T1.401.02-2000 电信.载体和用户装置间的接口.带区别警示功能的模拟音频转换访问线路

This standard defines the interface between network analog-switched access lines and customer installations for distinctive ringing features. This standard is a companion standard to American National Standard for Telecommunications - Network-to-Customer

Network to Customer Installation Interfaces - Analog Voicegrade Switched Access Lines with Distintive Ringing

ETSI ES 201 488-2000 电缆传输数据业务接口规范射频接口规范(版本1.1.1)

Data-Cover-Cable Service Interface Specifications Radio Frequency Interface Specification (V1.1.1)

ANSI T1.401.01-2000 电信.载体和用户装置间的接口.带边线应答性能的环路启动和接地启动信令的模拟音频转换访问线路

This standard provides the siganling requirements associated with the line-side answer supervision feature on analog switched-access lines using loop-start or ground-start signaling when the network provides this capability. Requirements are specified at

Network to Customer Installation Interfaces - Analog Voicegrade Switched Access Lines using Loop-Start and Ground-Start Signaling with Line-Side Answer Supervision Feature

ANSI/TIA/EIA-136-220-2000 无线电接口VSELP最低性能

this section describes the VSELP minimum performance

Radio Interface VSELP Minimum Performance

ANSI/TIA/EIA-136-230-2000 无线电接口US-1最低性能

this section describes the minimum performance specifications for US-1 voice coder.

Radio Interface US-1 Minimum Performance

ANSI/ATIS 0700715-2000 IMT-2000 CDMA DS和TDD无线电接口规范

IMT- 2000 CDMA DS and TDD Radio Interface Specifications

ANSI/ATIS 0600401.01-2000 网络到用户安装接口.采用循环启动和接地式呼叫信令及线侧应答监测特性的模拟音频级交换接入线

Network to Customer Installation Interfaces - Analog Voicegrade Switched Access Lines Using Loop-Start or Ground Start Signaling With Line-Side Answer Supervision Feature

ANSI/ATIS 0600401.02-2000 网络到用户安装接口.带区别响铃的模拟音频转换访问线路

Network-to-Customer Installation Interfaces - Analog Voicegrade Switched Access Lines with Distinctive Ringing Features

ANSI T1.401.05-2000 网络和用户装置间的接口.带网络实现投币付费电话功能的模拟音频转换访问线路

This standard provides the signaling requirements associated with analog, voicegrade, switched access lines with the network-implemented coin-operated payphone (NICOP) feature. This standard is intended to be used in conjunction with American National St

Network-to-Customer Installation Interfaces - Analog Voicegrade Switched Access Lines with Network-Implemented Coin-Operated Payphone Feature

ANSI T1.715-2000 IMT-2000 CDMA DS和TDD无线电接口规范

This standard describes in detail the specification for the IMT-2000 Radio Access Network Interface suitable for a third generation wireless mobile system to operate in any licensed North American band of frequencies. The frequencies to be used for IMT-2

IMT- 2000 CDMA DS and TDD Radio Interface Specifications

ANSI T1.716-2000 固定式无线PSTN访问用宽带直接顺序CDMA空中接口标准.1层

This document specifies the transmit functions of Layer 1 to define the air interface for a Broadband Direct Sequence CDMA system for Fixed Wireless PSTN Access (FWPA). This air interface satisfies the requirements defined in T1.TR.67-2001 for the single

Air Interface Standard for Broadband Direct Sequence CDMA for Fixed Wireless PSTN Access - Layer 1

ANSI T1.717-2000 固定式无线PSTN访问用宽带直接顺序CDMA空中接口标准.2层

This standard specifies the transmit functions of Layer 2 to define the air interface for a Broadband Direct Sequence CDMA system for Fixed Wireless PSTN Access (FWPA). This air interface satisfies the requirements defined in T1.TR.67-2001 for the single

Air Interface Standard for Broadband Direct Sequence CDMA for Fixed Wireless PSTN Access - Layer 2

ANSI T1.401.04-2000 电信.网络和用户装置间的接口.带呼叫延时、区别性呼叫延时或呼叫延时中呼叫身份传送功能的模拟音频转换访问线路

This standard provides the requirements associated with three different types of call waiting supplemental features that may be used on analog voicegrade switched access lines with loop-start signaling. The three features are called: Call Waiting (CW); D

Network to Customer Installation Interfaces - Analog Voicegrade Switched Access Lines with Call Waiting, Distinctive Call Waiting, or Calling Identity Delivery on Call Waiting Feature

YDN 124-1999 宽带综合业务数字网(B-ISDN)2号数字用户信令系统(DSS2)测试规范.用户接入控制部分(点一点)(内部标准)

Test spe4cifications for No.2 digital subscriber signaling system (DSS2) of broadband integrated service digital network (B-ISDN) Subscriber access control part (point-point) (internal standard)

ANSI T1.101-1999 电信.同步接口标准

Includes synchronization interface standards for digital networks. Describes and specifies type of digital network interfaces carrying synchronization references and synchronization performance specifications for DS1 and SONET optical carrier (OC-N) references at network interfaces. This standard was first listed for public review in the March 26, 1999 issue of Standards Action. It is being resubmitted due to substantive changes.To obtain an electronic draft: URL Address: ftp://ftp.t1.org/pub/ansi/bsr8/lb736-d.pdf

See ATIS T1.101

YD/T 1021-1999 VB5.2接口技术规范

VB5.2 interface technical specification

DIN ETS 300709:1999 终端设备(TE).屏幕文字和多媒体/超媒体检索服务用扩展的人机接口业务

The document specifies the data syntax to be used by Videotex and Multimedia/Hypermedia Information retrieval services.

Terminal Equipment (TE) - Enhanced Man Machine Interface service for Videotex and Multimedia/Hypermedia retrieval services (Endorsement of the English version ETS 300709:1997 as German standard)

YD/T 1017-1999 同步数字体系(SDH)网络节点接口

本标准规定了同步数字体系（SDH）网络节点接口（NND），提供了STM-N 信号在同步数字网络节点接口所需的规范。 本标准适用于公用电信网中以光纤为基本手段的传输网，包括省际干线、省内干线和中继网。接入网、专用电信网以及无线传输网也可参照使用。

Network node interface for the Sychronous Digital Hierarchy