M15 通信网性能指标及测试 标准查询与下载

ITU-T Z.161-2013 测试和测试控制记号版本3:TTCN.3核心语言.17号研究组

Recommendation ITU-T Z.161 defines TTCN-3 (Testing and Test Control Notation 3) intended for specification of test suites that are independent of platforms, test methods, protocol layers and protocols. TTCN-3 can be used for specification of all types of reactive system tests over a variety of communication ports. Typical areas of application are protocol testing (including mobile and Internet protocols), service testing (including supplementary services), module testing, testing of CORBA based platforms and APIs. The specification of test suites for physical layer protocols is outside the scope of this Recommendation.

Testing and Test Control Notation version 3: TTCN-3 core language Study Group 17

ITU-T Z.165-2013 测试和测试控制符号版本3:TTCN-3运行时接口(TRI).17号研究组

Recommendation ITU-T Z.165 provides the specification of the runtime interface for TTCN-3 test system implementations. The TTCN-3 runtime interface provides a standardized adaptation for timing and communication of a test system to a particular processing platform and the system under test, respectively. This Recommendation defines the interface as a set of operations independent of target language.The interface is defined to be compatible with the TTCN-3 standard. The present document uses the CORBA Interface Definition Language (IDL) to specify the TRI completely. Clauses 6, 7 and 8 of[ETSI ES 201 873-5 V4.5.1] present language mappings for this abstract specification to the target languages Java, ANSI C, and C++. A summary of the IDL-based interface specification is provided in Appendix A of [ETSI ES 201 873-5 V4.5.1].

Testing and Test Control Notation version 3: TTCN-3 runtime interface (TRI) Study Group 17

ITU-T Z.165.1-2013 (预发布)测试和测试控制符号版本3:TTCN-3语言扩展:扩展TRI

Recommendation ITU-T Z.165.1 defines the extended TRI package of TTCN-3. TTCN-3 can be used for the specification of all types of reactive system tests over a variety of communication ports. Typical areas of application are protocol testing (including mobile and Internet protocols), service testing (including supplementary services), module testing, testing of CORBA based platforms, APIs, etc. TTCN-3 is not restricted to conformance testing and can be used for many other kinds of testing including interoperability, robustness, regression, system and integration testing. The specification of test suites for physical layer protocols is outside the scope of this Recommendation.

(Pre-Published) Testing and Test Control Notation version 3: TTCN-3 language extensions: Extended TRI

ITU-T Z.161.4-2013 (预发布)测试和测试控制符号版本3:TTCN-3语言扩展:行为类型

Recommendation ITU-T Z.161.4 defines the behaviour types package of TTCN-3. TTCN-3 can be used for the specification of all types of reactive system tests over a variety of communication ports. Typical areas of application are protocol testing (including mobile and Internet protocols), service testing (including supplementary services), module testing, testing of CORBA based platforms, APIs, etc. TTCN-3 is not restricted to conformance testing and can be used for many other kinds of testing including interoperability, robustness, regression, system and integration testing. The specification of test suites for physical layer protocols is outside the scope of this Recommendation.TTCN-3 packages are intended to define additional TTCN-3 concepts, which are not mandatory as concepts in the TTCN-3 core language, but which are optional as part of a package which is suited for dedicated applications and/or usages of TTCN-3. This package defines types for behaviour definitions in TTCN-3.While the design of TTCN-3 package has taken into account the consistency of a combined usage of the core language with a number of packages, the concrete usages of and guidelines for this package in combination with other packages is outside the scope of this Recommendation.

(Pre-Published) Testing and Test Control Notation version 3: TTCN-3 language extensions: Behaviour types

ITU-T Z.161.2-2013 测试和测试控制记号版本3:TTCN.3语言扩展:配置和调度支持.17号研究组

Recommendation ITU-T Z.161.2 defines the configuration and deployment support package of TTCN-3. TTCN-3 can be used for the specification of all types of reactive system tests over a variety of communication ports. Typical areas of application are protocol testing (including mobile and Internet protocols), service testing (including supplementary services), module testing, testing of CORBA based platforms, APIs, etc. TTCN-3 is not restricted to conformance testing and can be used for many other kinds of testing including interoperability, robustness, regression, system and integration testing. The specification of test suites for physical layer protocols is outside the scope of this Recommendation.

Testing and Test Control Notation version 3: TTCN-3 language extensions: Configuration and deployment support Study Group 17

ITU-T Z.167-2013 测试和测试控制符号版本3:使用抽象语法标记(ASN.1)和TTCN-3.17号研究组

Recommendation ITU-T Z.167 defines a normative way of using ASN.1 as defined in the ITU-T Recommendation X.680, ITU-T Recommendation X.681, ITU-T Recommendation X.682 and ITU-T Recommendation X.683 with TTCN-3. The harmonization of other languages with TTCN-3 is not covered by this Recommendation.

Testing and Test Control Notation version 3: Using ASN.1 with TTCN-3 (Study Group 17)

ETSI TR 103 108-2013 电磁兼容与无线频谱事务(ERM).系统参考文件(SRDoc).运行于5.855GHz到5.875GHz频段使用3G技术的宽带直接空对地通信系统 版本1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); System Reference document (SRdoc); Broadband Direct-Air-to-Ground Communications System operating in the 5,855 GHz to 5,875 GHz band using 3G technology (V1.1.1)

ITU-T Z.166-2013 测试和测试控制符号版本3:TTCN-3控制接口(TCI).17号研究组

Recommendation ITU-T Z.166 specifies the control interfaces for TTCN-3 test system implementations. The TTCN-3 Control Interfaces provide a standardized adaptation for management, test component handling and encoding/decoding of a test system to a particular test platform. The present document defines the interfaces as a set of operations independent of a target language.

Testing and Test Control Notation version 3: TTCN-3 control interface (TCI) Study Group 17

ETSI TS 102 250-5-2013 语音与多媒体传输质量(STQ).移动网络中流行业务的QoS方面.第5部分:典型测量规约的定义 版本2.4.1

Speech and multimedia Transmission Quality (STQ); QoS aspects for popular services in mobile networks; Part 5: Definition of typical measurement profiles V2.4.1

YD/T 1013-2013 综合布线系统电气特性通用测试方法

General test method for electrical characteristics of integrated wiring system

YD/T 2336.3-2013 分组传送网（PTN）网络管理技术要求 第3部分：EMS-NMS接口功能

本部分规定了分组传送网(PTN)EMS-NMS之间的接口功能要求,主要规范了配置管理、故障管理、性能管理和安全管理等功能要求。本部分适用于规范、设计和开发PTN网元管理系统(EMS)与网络管理系统(NMS)之间的接口。

Technical requirements for packet transport network management.Part 3: EMS-NMS interface function

ETSI EN 301 473-2013 卫星地面站与系统(SES).根据航空移动卫星业务(AMSS)/移动卫星业务(MSS)和/或航空移动卫星途中业务(AMS(R)S)/移动卫星业务(MSS)要求的运行在低于3GHz的航空地面站(AES) 版本1.4.1

Satellite Earth Stations and Systems (SES); Aircraft Earth Stations (AES) operating below 3 GHz under the Aeronautical Mobile Satellite Service (AMSS)/ Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/ Mob

ETSI TS 123 216-2013 数字蜂窝通信系统(2+阶段).全球移动通信系统(UMTS).LTE.单一无线语音呼叫连续性(SRVCC).第2阶段 版本11.7.0. 3GPP TS 23.216 版本11.7.0 R11

Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Single Radio Voice Call Continuity (SRVCC); Stage 2 V11.7.0; 3GPP TS 23.216 version 11.7.0 Release 11

ETSI TR 103 157-2013 语音和多媒体传输质量(STQ).耳机的频率响应与耳机使用测量方法及STQ限制 TS 102 924 版本1.1.1

Speech and multimedia Transmission Quality (STQ); Frequency responses of Headphones and Earphones using measurement methods and limits of STQ TS 102 924 (V1.1.1)

ETSI TS 101 162-2013 数字视频广播(DVB).数字视频广播(DVB)系统的标识和编码的分配 版本1.6.1

Digital Video Broadcasting (DVB); Allocation of identifiers and codes for Digital Video Broadcasting (DVB) systems (V1.6.1)

ETSI TS 132 501-2012 全球移动通信系统(UMTS).LTE.电信管理.网元自配置.概念与需求 版本11.0.0. 3GPP TS 32.501 版本11.0.0 R11

Universal Mobile Telecommunications System (UMTS); LTE; Telecommunication management; Self-configuration of network elements; Concepts and requirements V11.0.0; 3GPP TS 32.501 version 11.0.0 Release 11

ITU-T G.1021-2012 客户端性能指标进步的缓冲模型研究组12

In this Recommendation, different buffer models are derived depending on the different applications taken into account.

Buffer models for development of client performance metrics (Study Group 12)

ITU-T Z.164-2012 测试和测试控制符号版本3:TTCN-3操作语义.17号研究组

This Recommendation defines the operational semantics of TTCN-3. The present document is based on the TTCN-3 core language defined in [1].

Testing and Test Control Notation version 3: TTCN-3 operational semantics (Study Group 17)

ITU-T Z.169-2012 (预发布)测试和测试控制符号版本3:XML数据定义的TTCN-3映射

This Recommendation defines the mapping rules for W3C Schema (as defined in [7], [8] and [9]) to TTCN-3 as defined in [1] to enable testing of XML-based systems, interfaces and protocols. This Recommendation is technically aligned with ETSI ES 201 873-9 V4.4.1 (2012).

(Pre-Published) Testing and Test Control Notation version 3: TTCN-3 mapping from XML data definition

ITU-T Z.166-2012 (预发布)第三版测试与测试控制符号:TTCN-3控制接口(TCI)

This Recommendation specifies the control interfaces for TTCN-3 test system implementations. The TTCN-3 control interfaces provide a standardized adaptation for management, test component handling and encoding/decoding of a test system to a particular test platform. The present document defines the interfaces as a set of operations independent of a target language.

(Pre-Published) Testing and Test Control Notation version 3: TTCN-3 control interface (TCI)