M32 数据通信设备 标准查询与下载

ETSI TS 101 952-1-2009 欧洲使用的接入网xDSL滤波器.第1部分:POTS滤波器上xDSL的一般规范(版本1.1.1)

Access network xDSL splitters for European deployment; Part 1: Generic specification of xDSL over POTS splitters (V1.1.1)

ETSI TS 185 003-2009 电信和互联网融合业务及高级网络协议(TISPAN).用户网络网关(CNG)架构和参考点(版本2.3.1)

Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Customer Network Gateway (CNG) Architecture and Reference Points (V2.3.1)

ETSI TS 102 613-2009 智能卡.UICC-遥控前端(CLF)接口.第1部分:物理和数据链路层特性(版本7.6.0,第7次发布)

Smart Cards; UICC - Contactless Front-end (CLF) Interface; Part 1: Physical and data link layer characteristics V7.6.0; Release 7

ETSI TS 185 006-2009 电信和互联网融合业务及高级网络协议(TISPAN).用户设备架构和参考点(版本2.3.1)

Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Customer Devices architecture and Reference Points (V2.3.1)

ETSI TS 102 486-1-3-2009 智能传输系统(ITS).公路传输和通信量远程信息处理业务(RTTT).专用短程通信(DSRC)传输设备的测试规范.第1部分:DSRC数据链路层:媒体接入和逻辑链路控制.第3子部分:抽象测试套件(ATS)和部分PIXIT形式

Intelligent Transport Systems (ITS); Road Transport and Traffic Telematics (RTTT); Test specifications for Dedicated Short Range Communication (DSRC) transmission equipment; Part 1: DSRC data link layer: medium access and logical link control; Sub-Part 3:

ETSI TS 185 009-2009 电信和互联网融合业务及高级网络协议(TISPAN).基于IPTV业务IMS的用户网络设备架构和参考点(版本2.2.1)

Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Architecture and reference points of a customer network device for IMS based IPTV services (V2.2.1)

ETSI TR 185 013-2009 电信和互联网融合业务及高级网络协议(TISPAN).用户网络设备用编解码器(版本3.1.1)

Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Codecs for customer network devices

ETSI TS 102 127-2009 智能卡.CAT应用的传输协议.第2阶段(版本6.13.0,第6次发布)

Smart Cards; Transport protocol for CAT applications; Stage 2 (V6.13.0; Release 6)

ETSI TS 102 639-5-2009 接入和终端,传输和复用(ATTM).交互式有线电视业务的第3代传输系统-IP电缆调制解调器.第5部分:安全业务(版本1.1.1).ITU-T建议J.222.3 (07/2007),修正本

Access and Terminals, Transmission and Multiplexing (ATTM); Third Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems; Part 5: Security Services

ETSI TS 102 225-2009 智能卡.基于UICC应用的安全分组结构(版本8.2.0,第8次发布)

Smart Cards; Secured packet structure for UICC based applications V8.2.0; Release 8

ETSI TS 102 639-3-2009 接入和终端,传输和复用(ATTM).交互式有线电视业务的第3代传输系统-IP电缆调制解调器.第3部分:下行接口(版本1.1.1).ITU-T建议J.210 (11/2006),修正本

Access and Terminals, Transmission and Multiplexing (ATTM); Third Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems; Part 3: Downstream Interface

ETSI TS 102 639-1-2009 接入和终端,传输和复用(ATTM).交互式有线电视业务的第3代传输系统-IP电缆调制解调器.第1部分:总则(版本1.1.1)

Access and Terminals, Transmission and Multiplexing (ATTM); Third Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems; Part 1: General

ETSI TS 102 639-4-2009 接入和终端,传输和复用(ATTM).交互式有线电视业务的第3代传输系统-IP电缆调制解调器.第4部分:MAC和上层协议(版本1.1.1).ITU-T建议J.222.2 (07/2007),修正本

Access and Terminals, Transmission and Multiplexing (ATTM); Third Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems; Part 4: MAC and Upper Layer Protocols

ETSI TS 102 639-2-2009 接入和终端,传输和复用(ATTM).交互式有线电视业务的第3代传输系统-IP电缆调制解调器.第2部分:物理层(版本1.1.1).ITU-T建议J.222.1 (07/2007),修正本

Access and Terminals, Transmission and Multiplexing (ATTM); Third Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems; Part 2: Physical Layer

ETSI TS 102 483-2009 智能卡.UICC-终端接口.UICC和终端间的互联网协议连通性(版本8.1.0,第8次发布)

Smart cards; UICC-Terminal interface; Internet Protocol connectivity between UICC and terminal

ITU-R S.1844 SPANISH-2009 频率范围在2-31 GHz的线式偏振甚小孔径终端(VSAT)的交叉偏振参考增益方向图

This Recommendation provides a cross-polarization reference gain pattern that, in the absence of particular information concerning the cross-polarization radiation pattern of a linearly polarized very small aperture terminal (VSAT) earth station antenna, should be used as a reference for interference calculations involving VSAT earth stations in the fixed-satellite service and stations of other services sharing the same frequency band, as well as coordination studies and interference assessment between systems in the fixed-satellite service.

Cross-polarization reference gain pattern for linearly polarized very small aperture terminals (VSAT) for frequencies in the range 2 to 31 GHz

ETSI TR 183 050-2009 电信和互联网融合业务及高级网络协议(TISPAN).指定协议号码和名称的寄存器(版本2.1.1)

Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Register of assigned protocol numbers and names

ETSI TS 102 613-2008 智能卡.UICC非接触式前端(CLF)接口.第1部分:物理和数据链路层特性(7发行)

The present document specifies the Single Wire Protocol (SWP). SWP is the interface between the UICC and the CLF. The present document defines: ? Layer1: The physical layer which is responsible for activating, maintaining and deactivating the physical link between the UICC and the CLF. It defines electrical (voltage and current levels, timing and coding of voltage and current levels), mechanical (physical contacts) and functional (data rates) specifications. It also defines the initial communication establishment and the end of the connection. ? Layer 2: The data link layer which is responsible for the physical addressing of the data through frames and Link Protocol Data Units (LPDU). The data link layer is also responsible for error notification, ordered delivery of frames and flow control. This layer can be split into two sub-layers: - The Medium Access Control (MAC) layer which manages frames. - The Logical Link Control layer which manages LPDUs and is responsible for the error-free exchange of data between nodes. Three different Logical Link Control layers are defined in the present document.

Smart Cards; UICC - Contactless Front-end (CLF) Interface; Part 1: Physical and data link layer characteristics V7.3.0; Release 7

ETSI TS 102 127-2008 智能卡.CAT应用的传输协议.阶段2(6发行)

The present document defines the stage two description of the Card Application Toolkit Transport Protocol (CAT_TP), for CAT applications based on TS 102 223. The present document contains the core functionalities for the CAT_TP between two CAT_TP entities hosting for instance on a UICC and on a remote entity. The CAT_TP described in the present document is based on RDP version 2 as specified in RFC 908 and RFC 1151. The present document describes, according requirements defined in TS 102 124: ? The core functionalities of CAT_TP (data structures, state diagrams, protocol procedures, etc.). ? Usage of CAT_TP on top of the Bearer Independent Protocol (BIP). The following items are out of the scope of the present document: ? The specific implementation of an API. ? Anything dealing with the security above CAT_TP.

Smart Cards; Transport protocol for CAT applications; Stage 2 V6.12.0; Release 6

ETSI TS 102 973-2008 接入终端,传输和多路技术(ATTM),下一代网络架构的网络终端(NT)V1.1.1

Access Terminals, Transmission and Multiplexing (ATTM); Network Termination (NT) in Next Generation Network architectures (V1.1.1)