M60 广播、电视网综合 标准查询与下载

ITU-T G.114 AMD 2-2009 单向传输时间.2号修正案:3号新附录.非共享接入线路的延迟变化.12号研究组

Appendix III of Recommendation ITU-T G.114 provides an introduction on the effect of different IP services on lines with limited bandwidth (e.g., DSL). It explains the mechanism of serialization delay, gives a (very general) overview over prioritization and shows how the maximum delay variation due to concurrent traffic can be calculated. The calculations shown in this appendix are valid for unshared lines only, shared lines are excluded.

One-way transmission time Amendment 2: New Appendix III Delay variation on unshared access lines Study Group 12

ITU-R REPORT M.2115-1-2009 动态频率选择操作的检验程序

This Report consolidates the DFS test methodology used and findings across several administrations, as shown in several annexes. Information is provided on the test methodologies in place in various administrations and/or regional groups to test compliance with DFS requirements. These procedures may be updated over time, and as technology evolves. As a result, web links are provided (in some cases) to the test methodologies themselves, so that the most up-to-date information may be obtained.

Testing procedures for implementation of dynamic frequency selection

DIN EN 62002-2:2008 移动和便携式DVB-T/H无线电通路.第2部分:结构一致性测试(IEC 62002-2-2008).德文版本EN 62002-2-2008

Mobile and portable DVB-T/H radio access - Part 2: Interface conformance testing (IEC 62002-2:2008); German version EN 62002-2:2008

DIN EN 300468:2008 数字视频广播(DVB).DVB系统的服务信息(SI)规范

Digital Video Broadcasting (DVB) - Specification for Service Information (SI) in DVB systems (Endorsement of the English version EN 300468 V1.8.1 (2008-07) as German standard)

DIN EN 302502:2008 宽带无线电接入网络(BRAN).5.8GHz固定宽带数据传输系统.包括R&TTE指令3.2条款基本要求的协调欧洲标准

Broadband Radio Access Networks (BRAN) - 5,8 GHz fixed broadband data transmitting systems - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive (Endorsement of the English version EN 302502 V1.2.1 (2008-07) as German s

GY/T 237-2008 VHF/UHF.频段地面数字电视广播频率规划准则

本标准规定了符合GB 20600-2006的地面数字电视频率规划用参数及方法。 本标准适用于VHF/UHF频段的地面数字电视广播系统覆盖网规划。

Frequency planning criteria for digital terrestrial television broadcasting in the VHF/UHF bands

GY/Z 234-2008 移动多媒体广播复用实施指南

本指导性技术文件作为GY/T 220.2-2006《移动多媒体广播 第2部分：复用》在实施过程中应用指南。 本指导性文件适用于通过卫星和/或地面无线发射视频、音频、数据信息等多媒体信号的广播系统。

Implementation guide for mobile multimedia broadcasting multiplexing

ETSI TS 102 366-2008 数字音频压缩(AC-3,增强AC-3)标准V1.2.1

Digital Audio Compression (AC-3, Enhanced AC-3) Standard V1.2.1

BS EN 60728-4:2008 电视信号、声音信号和交互式设备用电缆网.同轴电缆网用无源多频率设备

This part of IEC 60728 applies to system outlets, splitters and taps, passive single or multiple port equipment comprising filters, attenuators, equalizers, galvanic isolators, power injectors, cable splices, terminating resistors and transfer points, but excluding coaxial cables and receiver leads (see 5.2). This standard • covers the frequency range 5 MHz to 3 000 MHz; • identifies performance requirements for certain parameters; • lays down data publication requirements for certain parameters; • stipulates methods of measurements; • introduces minimum requirements defining quality grades. There are three grades for all passive equipment except system outlets where there is only one. Different networks require the same performance and, when integrating networks, upgrading will be avoided. Practical experience has shown that these three grades meet most of the technical requirements necessary for supplying a minimum signal quality to the subscribers. This classification should not be considered as a requirement but as information for users and manufacturers on the minimum quality criteria of the material required to install networks of different sizes. The system operator should select appropriate material to meet the minimum signal quality at the subscriber's outlet and to optimize cost/performance, taking into account the size of the network and local circumstances. All requirements and published data should be understood as guaranteed values within the specified frequency range and in well-matched conditions.

Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks

DIN IEC 62455 Berichtigung 1:2008 互联网协议(IP)和基于服务访问的传输流(TS).技术勘误DIN IEC 62455-2008

Internet protocol (IP) and transport stream (TS) based service access (IEC 62455:2007), Text in English, Corrigenda to DIN IEC 62455:2008-02

EN 60728-4:2008 电视信号,声音信号和交互式设备用电缆网络.第4部分:共轴电缆网络的无源宽谱带设备［替代:CENELEC EN 50083-4］

This part of IEC 60728 applies to system outlets, splitters and taps, passive single or multiple port equipment comprising filters, attenuators, equalizers, galvanic isolators, power injectors, cable splices, terminating resistors and transfer points, but excluding coaxial cables and receiver leads (see 5.2). This standard ? covers the frequency range 5 MHz to 3 000 MHz; ? identifies performance requirements for certain parameters; ? lays down data publication requirements for certain parameters; ? stipulates methods of measurements; ? introduces minimum requirements defining quality grades. There are three grades for all passive equipment except system outlets where there is only one. Different networks require the same performance and, when integrating networks, upgrading will be avoided. Practical experience has shown that these three grades meet most of the technical requirements necessary for supplying a minimum signal quality to the subscribers. This classification should not be considered as a requirement but as information for users and manufacturers on the minimum quality criteria of the material required to install networks of different sizes. The system operator should select appropriate material to meet the minimum signal quality at the subscriber's outlet and to optimize cost/performance, taking into account the size of the network and local circumstances. All requirements and published data should be understood as guaranteed values within the specified frequency range and in well-matched conditions.

Cable networks for television signals@ sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks

ITU-T J.244-2008 带有恒定增益和恒定偏置量的空间和时间域恒定偏差的视频传输系统的全参考型和部分参考型标定方法.9号研究组

This Recommendation specifies calibration methodswhich report alignment shifts in both space and time of processed (e.g., compressed, transmitted, and decompressed) video sequences with respect to corresponding source video sequences. The methods also compute gain and offset of processed video sequences. The methods require that spatial and temporal shifts must be constant. Furthermore, the gain and offset must be constant.

Full reference and reduced reference calibration methods for video transmission systems with constant misalignment of spatial and temporal domains with constant gain and offset Study Group 9

CEA-766-C-2008 用ATSC节目和系统信息协议(PSIP)对内容报告信息传输的美国和加拿大分级区域表(RRT)和内容报告描述

CEA-766-C augments ATSC A/65C and designates a) the RRT which provides the receiver with the definition of the rating system and b) the Content Advisory Descriptors which provide the receiver with the specific program rating for each program. Specifically, CEA-766-C specifies the exact syntax to be used to define the U.S. and Canadian Rating Region Tables (RRT) in accordance with ATSC A/65C Section 6.4, as well as the exact syntax to be used in the Content Advisory Descriptors that convey the rating information for each program in accordance with ATSC A/65C Section 6.9.3. Thus DTV receivers are able to block unwanted programs as determined by the user. CEA-766-C does not indicate and is not meant to indicate techniques or procedures for blocking at the DTV receiver (for example, remote control, other human interface devices, on-screen displays and/or graphical user interfaces). See Annex A for related FCC regulations.

U.S. and Canadian Rating Region Tables (RRT) and Content Advisory Descriptors for Transport of Content Advisory Information Using ATSC Program and System Information Protocol (PSIP)

DIN IEC 62455:2008 网际协议(IP)和基于服务访问的传输流(TS)

This International Standard specifies the terminal for a service purchase and protection system for digital broadcasts, called the 18Crypt system. It is applicable in all countries and regions with suitably compliant broadcasting and multimedia distribution systems. Guidelines for compatible broadcast services are given in this standard. The service purchase and protection functions operate in a pure broadcast environment that may be combined with a bi- directional interactivity channel. This standard is applicable to the following broadcast systems. a) IPDC over DVB-H systems ~/ IP datacast over DVB-H is an end-to-end broadcast system for delivery of any type of digital content and services using IP-based mechanisms optimized for devices with limitations on computational resources and battery. An inherent part of the IP datacast system is that it comprises a unidirectional DVB broadcast path that may be combined with a bi-directional mobile/cellular interactivity path. IP datacast is thus a platform that can be used for enabling the convergence of services from broadcast/media and telecommunications domains (for example, mobile/cellular). This standard specifies service purchase and protection for IP datacast over DVB-H systems (see B.10.3 for an overview of references). b) DVB T/CIS systems DVB T/CIS systems are end-to-end broadcast systems for audio/video data that employ an MPEG2 transport stream and use terrestrial, cable or satellite broadcast networks. This standard specifies a system for the protection of these broadcasts in a pure broadcast environment. In addition, this standard specifies how purchasing, key management and registration may be carried out over an optional interactivity channel. The protection technologies offered by this standard are designed to operate within an existing DVB SimulCrypt environment (see B.10.2 for an overview of references). c) MPEG2 TS-based IP systems MPEG2 TS-based IP systems employ bi-directional IP networks for the (broadcast) delivery of MPEG2 transport streams. This standard specifies a system for the purchase and protection of services and content delivered via these networks. This standard is applicable to, for example, DVB-IPI systems (see B.10.4 for an overview of references). d) Non-MPEG2 TS-based IP systems Non-MPEG2 TS-based IP systems employ bi-directional IP networks for the (broadcast) delivery of audio/video or other data using IP protocols instead of an MPEG2 transport stream. This standard specifies a system for the purchase and protection of services and content delivered via these networks (see B.10.4 for an overview of references).

Internet protocol (IP) and transport stream (TS) based service access (TS) (IEC 62455:2007), Text in English

ITU-R REPORT BT.2137-2008 数字地面电视广播(DTTB)网络的覆盖区预测方法和计划软件

The implementation of DTTB services in parallel with existing analogue services in several countries has created the need to refine some of the traditional computer-based frequency planning techniques to enable a greater degree of accuracy in coverage prediction.

Coverage prediction methods and planning software for digital terrestrial television broadcasting (DTTB) networks

ANSI/ATIS 0100017-2008 降低参考视频校准和估算方法

Reduced Reference Video Calibration and Estimation Method

ANSI/CEA 849-B-2008 符合DTVs的CEA-775应用轮廓

This standard defines transport and content coding formats a compliant DTV shall support in order to inter-operate with various digital audio and video sources. A DTV compliant with this standard shall also comply with the requirements of CEA-775-C.

Application Profiles for CEA-775 Compliant DTVs

ANSI/CEA 608-E-2008 线路21数据服务

This is a technical standard and guide for using/ providing Closed Captioning services or other data services embedded in line 21 of the vertical blanking interval of the NTSC video signal. It includes a provision for encoding equipment and/or decoding equipment to produce such material as well as manufacturers of television receivers which are required to include such decoders in their equipment. It is also a usage guide for producing and distributing material using such equipment.

Line 21 Data Services

IEC 60728-1:2007 电视信号、声音信号和交互式设备用电缆网络.第1部分:正向传输路径的系统性能

This part of IEC 60728 is applicable to any cable network(including individual receiving systems)having in the forward path a coaxial cable output and primarily intended for television and sound signals operating between about 30 MHz and 3 000 MHz． This standard specifies the basic methods of measurement of the operational characteristics of cable network having coaxial cable outputs in order to assess lhe performance of these systems and their performance limits． AIl requirements refer to the performance limits，which shall be obtained between the input(s) to the headend or headends and any system outlet when terminated in a resistance equal to the nominal load impedance of fhe system．unless otherwise specified．Where system outlets are not used，the above applies at the subscriber's end of the subscriber's feeder．Also the requirements which are obtained between the input(s) to the headend or headends and any home network interface(HNI)are given． NOTE 1 Methods of measurement described in this standard are considered as basic．However，any equivalent method that ensures at least the same accuracy may be used． NOTE 2 If the system operator wishes to subdivide the system into a number of parts or wishes to use different transmission media(for example，coaxial cabling，balanced cabling．optical cabling)，the accumulation of aegraaations should not exceed the fIgures given in this standard． NOTE 3 System performance requirements of return paths as well as specific methods of measurement for the use of the return paths in cable networks are described in IEC 60728—10． Clause 5 defines the system performance limits which will，with an unimpaired input， (headend input signal)，produce picture and sound signals(at system outlets)where the impairment to any single parameter wiII be not worse．in normaI operating conditions for any analogue channeI，than Grade four on the five—grade impairment scale contained in ITU-BT 500-10．For digitally modulated signals．the quality requirement is a quasi-error-free(QEF) reception． Appropriate performance requirements for the signals at the receiving antennas site are giyen in Clause 6 in order to provide at the input of the headend of the cable network both analogue and digital television signals with suitable quality． 一 Clause 7 is applicable to home networks(including those of individual receiving systems) using coaxial cables，balanced cables or optical cables and primarily intended for television signals，sound signals and interactive services，operating between about 30 MHz and 3 000 MHz． This clause，considering the basic operational characteristics of a home network，specifies the requirements which shall be obtained at the home network interface(HNI)taking into account the performance requirements given at the system outlet or at the terminal input．

Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths

BS DD IEC/TS 62312-2:2007 音频和视频的同步指南.音频和视频系统的同步方法

The IEC 62312 series gives guidelines for methods of synchronization of audio and video. This part of IEC 62312 describes the system model and general methods for the synchronization of audio and video. The methods exclude the synchronization of the signal source and the spatial delay of audio reproduction.

Guideline for synchronization of audio and video - Methods for synchronization of audio and video systems