M70 广播、电视设备综合 标准查询与下载

BS EN 61966-7-1:2006 多媒体系统和设备.颜色测量和管理.彩色打印机.反射打印.RGB输入法

This part of IEC 61966 specifies a set of data in colour test chart files for measurements, sampling of successive prints, measurement conditions and forms of reporting the results so as to make possible the characterization of the colour printer and comparison of the results of measurements. The sets of data for measurements are in colour test chart files expressed in a red–green–blue colour space, to which corresponding colour images are reproduced on reflective substrate. The methods of measurement in this standard are designed to be applicable to reflective colour prints for consumer use. The reflective colour prints may be produced by non-impact colour printers, incorporating such technologies as ink-jet, sublimation transfer, thermal transfer, electro-photography and other similar technologies. This standard does not specify limiting values for various attributes.

Multimedia systems and equipment - Colour measurement and management - Colour printers - Reflective prints - RGB inputs

BS EN 61966-2-4:2006 多媒体系统和设备.颜色测量和管理.颜色管理.电视用超范围的YCC颜色范围.xvYCC.

This part of IEC 61966 is applicable to the encoding and communication of YCC colours used in video systems and similar applications by defining encoding transformations for use in defined reference capturing conditions. If actual conditions differ from the reference conditions, additional rendering transformations may be required. Such additional rendering transformations are beyond the scope of this standard.

Multimedia systems and equipment - Colour measurement and management - Colour management - Extended-gamut YCC colour space for video applications - xvYCC

KS C IEC 62087:2006 音频、视频和相关设备的功率消耗用测量方法

이 규격은 TV 수신기, VCR, 세트 톱 박스(STB), 오디오 기기 및 소비자용 다기능

Methods of measurement for the power consumption of audio, video and related equipment

JEITA ED2730-2006 等离子显示组件用气候和机械测试方法

This standard defines testing methods for evaluating climatic and mechanical characteristics of plasma display modules (PDP modules). Remark: The normative references are shown in Appendix Table.

Climatic and mechanical testing methods for plasma display modules

TIA SP 3-1790-RV2-2006 光器件的流体浸泡试验 以TIA-455-12B 发表

?The U.S. Military section Referenced Documents list, 2.3, of Revision A.

Fluid Immersion Test for Fiber Optic Components To be published as TIA-455-12B

BS EN 62333-1:2006 数字装置和设备用噪声抑制片.定义和一般性能

To be read in conjunction with BS EN 62333-2

Noise suppression sheet for digital devices and equipment - Definitions and general properties

BS EN 62333-2:2006 数字装置和设备用噪声抑制片.测量方法

To be read in conjunction with BS EN 62333-1

Noise suppression sheet for digital devices and equipment - Measuring methods

GY/T 212-2005 标准清晰度数字电视编码器、解码器技术要求和测量方法

本标准规定了视频编解码采用GB/T 17975主型主级、音频编解码采用GB/T 17191层II的数字电视编码器、解码器的主要技术要求和测量方法。对于能够确保同样测量不确定度的任何等效测量方法也可采用。有争议时，应以本标准为准。 本标准适用于广播电视专业用标准清晰度数字电视编码器、解码器的开发、生产、应用、测试、运行维护。

Technical requirements and measurement methods of encoders and decoders for the standard definition digital television

TIA PN 3-0175-RV1-2006 广播多播业务(BCMCS)的互操作性规范(IOS)

This document was produced by Working Groups TR45.4 of the Telecommunications Industry Associat5 ion and TSG-A of the Third Generation Partnership Project 2. This document was developed in accord6 ance with TIA/EIA and 3GPP2 procedural guidelines, and r

Interoperability Specification (IOS) for Broadcast Multicast (BCMCS) To be published as TIA-2006-A

BS EN 61966-6:2006 多媒体系统和设备.颜色测量和管理.正面投影显示器

This part of IEC 61966 defines input test signals, measurement conditions, methods of measurement and reporting of the measured data, to be used for colour characterization and colour management of front projection displays in multimedia systems. Colour control within equipment is outside the scope of this part. It does not specify limiting values for various parameters.

Multimedia systems and equipment - Colour measurement and management - Front projection displays

BS EN 50401:2006 验证投入使用的具有基本限值或参数范围的无线通讯网络用固定无线电广播设备(110MHz～40GHz)合格性的产品标准(基本限值和参考范围与公众暴露于无线电频率电磁场相关)

This product standard applies to base stations as defined in Clause 3, operating in the frequency range 110 MHz to 40 GHz. The objective of the standard is to verify that such product complies with the basic restrictions directly or via compliance with reference levels related to the general public exposure to radio frequency electromagnetic fields in the frequency range 100 kHz to 40 GHz, where the general public has access and when it is put into service in its operational environment.

Product standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz - 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to r

BS EN 50400:2006 验证投入使用的具有基本限值或参数范围的无线通讯网络用固定无线电广播设备(110MHz～40GHz)合格性的基本标准(基本限值和参考范围与公众暴露于射频电磁场相关)

This basic standard applies to Base Stations as defined in Clause 4, operating in the frequency range 110 MHz to 40 GHz. The objective of this basic standard is to specify, for such equipment and when it is put into service in its operational environment, the methods to assess the value of the Total Exposure Ratio or to establish whether the Total Exposure Ratio is less than or equal to one in relevent areas where the general public has access.

Basic standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz - 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to rad

BS EN 62389:2006 DVD播放器的测量方法

This International Standard specifies measurement methods of electrical characteristics for consumer-use DVD players. This standard is applicable for use in the description of performances for catalogues and brochures of the products.

Methods of measurement for DVD players

BS EN 50400:2006+A1:2012 验证投入使用的具有基本限值或参数范围的无线通讯网络用固定无线电广播设备(110 MHz-40 GHz)合格性的基本标准(基本限值和参考范围与公众暴露于射频电磁场相关)

Basic standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz - 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to rad

GY/T 217-2006 有限电视系统用射频同轴连接器技术要求和测量方法

本标准规定了有线电视系统射频同轴连接器（5MHz～1000MHz）的技术要求和测量方法。对于能够确保同样测量不确定度的任何等效方法也可以采用。有争议时应以本标准为准。 本标准适用于有线电视系统用射频同轴连接器（5MHz～1000MHz）的研发、生产、验收和应用。

Specifications and methods of measurement on Radio-frequency coaxical connector used in CATV systems

ITU-T J.181 NOTE SPANISH-2006 电视信号的数字传输研究组9

Digital program insertion cueing message for cable television systems

BS EN 62328-1:2005 多媒体家用服务器系统.适合广播接收机用可互换的内容/文件结构.第1部分:一般描述和结构

This part of IEC 62328 defines the volume and file structure required for interchanging multimedia data of a home server/broadcasting receiver, which consists of an AV stream with multiple associated objects. This part of IEC 62328 specifies references, definitions, abbreviations, notation and bibliography that apply to this and the other three parts. It also specifies requirements, design considerations and content architecture.

Multimedia home server systems - Interchangeable volume/file structure adaptation for broadcasting receivers - Part 1: General description and architecture

ITU-R BT.1306-3-2006 数字陆地电视广播的纠错、数据帧、调制和发射方法

This Recommendation defines error-correction, data framing, modulation and emission methods for digital terrestrial television broadcasting.

Error-correction, data framing, modulation and emission methods for digital terrestrial television broadcasting

ITU-R REPORT BT.2088-2006 立体电视机

Stereoscopic image systems allow the illusion of depth to be presented using a flat display. They have been developed for cinema, television and other uses such as medical imaging. Stereoscopic image systems should not be confused with holography, which requires the use of lasers and is not in general compatible with existing cinema or television technology.

Stereoscopic television

ITU-R RS.1165-2-2006 气象辅助业务中无线电探空系统的技术特征和性能标准

The purpose of this Recommendation is to provide the stage 1 description of the method defined in Recommendation 1.130 using the means given in Recommendation 1.210.

Technical characteristics and performance criteria for systems in the meteorological aids service in the 403 MHz and 1 680 MHz bands [Superseded: ITU-R SA.1165-1 ITU-R SA.1165]