共找到 720 条与 音响、电声设备 相关的标准,共 48 页
This specification covers one type of loudspeaker designated Dynamic Loudspeaker LS-184A/AIC-10. Dynamic Loudspeaker LS-184A/AIC-10 is one item of Intercommunication Set AN/AIC-10A.
DYNAMIC LOUDSPEAKER LS-184A/AIC-10
Methods of Measurement for Audio Signal in Audio Visual Equipment
This part of IEC 61937 specifies the method for IEC 60958 to convey non-linear PCM bitstreams encoded in accordance with the MPEG 2 AAC (Advanced Audio Coding) and MPEG-4 AAC format.
Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 6: Non-linear PCM bitstreams according to the MPEG-2 AAC and MPEG-4 AAC audio formats (IEC 61937-6:2006); German version EN 61937-6:2006
This part of IEC 61937 specifies the method for the digital audio interface specified in IEC 60958 to convey non-linear PCM bitstreams encoded in accordance with the WMA Professional format.
Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 8: Non-linear PCM bitstreams according to the windows media audio professional format
Marking method of reaching distance of sound and operating time of dry cells on the transistor megaphone
Multimedia systems and equipment - Colour measurement and management - Part 6: Front projection displays (IEC 61966-6:2005); German version EN 61966-6:2006
This part of IEC 61094 - gives a polynomial function derived from a least square fit to data from several laboratories, for the differences between free-field and pressure sensitivity levels of laboratory standard microphones as specified in IEC 61094-1, - enables determination of the free-field sensitivity level of a laboratory standard microphone for zero-degrees incidence in air by adding values of these differences to the pressure sensitivity level, - gives tabulated values for the polynomial function for a range of frequency and temperature, - is applicable when a suitable free-field calibration is not available.
Measurement microphones - Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones
The use of devices for preventing the occurrence of excessive acoustic pressure by telephone receivers is recommended in ITU-T Rec. K.7.
Efficiency of devices for preventing the occurrence of excessive acoustic pressure by telephone receivers and assessment of daily noise exposure of telephone users Study Group 12
This specification covers a sound protective earcup for the HGU-26/P flight helmet. The earcup is designated MX-8376/AR.
EARCUP, SOUND PROTECTIVE MX-8376/AR
This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of radiation hardness assurance levels are reflected in the PIN.
MICROCIRCUIT, LINEAR, INSTRUMENTATION AMPLIFIER, MONOLITHIC SILICON
This Recommendation specifies a coded representation that can be used for compressing the speech or other audio signal component of multimedia servicesat a very low bit rate. In the design of this coder, the principal application considered was very low bit ratevisual telephony as part of the overall H.324 family of standards.
Dual rate speech coder for multimedia communications transmitting at 5.3 and 6.3 kbit/s Study Group 16
This Recommendation specifies a coded representation that can be used for compressing the speech or other audio signal component of multimedia servicesat a very low bit rate. In the design of this coder, the principal application considered was very low bit ratevisual telephony as part of the overall H.324 family of standards.
Dual rate speech coder for multimedia communications transmitting at 5.3 and 6.3 kbit/s Study Group 16
This part of IEC 60958 specifies the consumer application of the interface for the interconnection of digital audio equipment defined in IEC 60958-1. NOTE When used in a consumer digital processing environment, the interface is primarily intended to carry stereophonic programmes, with a resolution of up to 20 bits per sample, an extension to 24 bits per sample being possible.
Digital audio interface - Part 3: Consumer applications
MIL-DTL-27467B, dated 9 September 2005, is hereby reactivated and may be used for either new or existing design acquisition.
HEADSET, ELECTRICAL H-154A/AIC
CONNECTORS, ELECTRICAL MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200°C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR This specification is approved for use by all Departments and
AMPLIFIERS, RADIO-FREQUENCY AND MICROWAVE, SOLID- STATE, GENERAL SPECIFICATION FOR
This part of IEC 61937 specifies the method for the digital audio interface specified in IEC 60958 to convey non-linear PCM bitstreams encoded in accordance with the ATRAC, ATRAC2/3 and ATRAC-X formats.#,,#
Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats (IEC 61937-7:2004); German version EN 61937-7:2005
This part of ISO 389 specifies a reference threshold of hearing for the calibration of audiometric equipment used under the following conditions. a) The sound field in the absence of the listener consists of either a free progressive plane wave (free field) or a diffuse sound field, as specified in ISO 8253-2. In the case of a free field, the source of sound is directly in front of the listener (frontal incidence). b) The sound signals are pure (sinusoidal) tones in the case of free-field conditions and one-third octave bands of (white or pink) noise in the case of diffuse-field conditions. c) The sound pressure level is measured in the absence of the listener at the position where the centre of the listener's head would be. d) Listening is binaural. NOTE 1 Correction values for the thresh'old of hearing under free-field listening conditions and selected angles of sound incidence (45° and 90°) deviating from frontal incidence are given in ISO 8253-2 for information. NOTE 2 Other conditions are given in Bibliographic Reference [1]. The data are given in numerical form for the preferred frequencies in the one-third-octave series from 20 Hz to 16 000 Hz inclusive in accordance with ISO 266 and, in addition, for some intermediate audiometric frequencies up to 18 000 Hz. It should be emphasized that the threshold data differ from the audiometric zero specified in ISO 389-1, ISO 389-2, ISO/TR 389-5 and ISO 389-8, since the latter refer to monaural listening through earphones with sound pressure levels referred to specified couplers and ear simulators. Direct comparison between the data in the parts of ISO 389 mentioned above and in this part of ISO 389 is therefore not appropriate.
Acoustics - Reference zero for the calibration of audiometric equipment - Reference threshold of hearing under free-field and diffuse-field listening conditions
Describes audio bitstreams encoded according to the Digital Theater Systems (DTS) format data-types I, II and III.
Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 5: Non-linear PCM bitstreams according to the DTS (Digital Theatre Systems format(s))
Specifies the method for IEC 60958 to convey non-linear PCM bitstreams encoded in accordance with the MPEG-2 AAC (Advanced Audio Coding) and MPEG-4 AAC formats.
Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 6: Non-linear PCM bitstreams according to the MPEG-2 AAC-format and MPEG-4 AAC audio formats
This specification covers two types of noise canceling; carbon microphone units designated Microphone Unit M-6A/UR and Carbon Microphone M-51/UR.
MICROPHONE UNIT M-6A/UR AND MICROPHONE, CARBON M-51/UR (CARBON NOISE CANCELLING)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号