M72 音响、电声设备 标准查询与下载

DLA SMD-5962-89494 REV C-2001 硅单片精密运算扬声器双线性微电路

This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.

MICROCIRCUIT, LINEAR, DUAL, PRECISION OPERATIONAL AMPLIFIER, MONOLITHIC SILICON

IEC 62080:2001 家用和类似用途的声音信号发送装置

This International Standard applies to sound signalling devices with integral enclosures or to sound signalling devices intended to be fitted into or supplied with enclosures according to IEC 60670 intended for household and similar purposes with rated voltages greater than 50 V a.c. or 75 V d.c. and not exceeding 250 V a.c. or 250 V d.c., and with rated power inputs not exceeding 100 VA. These products are designated as "devices" throughout the remainder of the text. This standard applies to fixed, portable and plug-in devices for indoor or outdoor use. In locations where special conditions prevail, special constructions may be required. NOTE 1 This standard or parts of it may be used as a guide for sound signalling devices having a voltage less than 50 V a.c. or 75 V d.c. Additional requirements for sound signalling devices having a voltage less than 50 V a.c. or 75 V d.c. are under consideration. NOTE 2 This standard does not cover the radio transmitting or receiving functions.

Sound signalling devices for household and similar purposes

BS EN 60268-3:2001 音响系统设备.放大器

To be read in conjunction with CENELEC HD 483.1 S2:1989, CENELEC HD 483.2 S2:1993

Sound system equipment. Amplifiers

DIN EN 50320:2001 数字音频广播系统.接收器DAB命令集规范

The document describes a command set which should be used to control DAB receivers. The coding of these commands is also described. This command set is intended to be used on different physical bus systems.

Digital audio broadcasting system - Specification of the DAB command set for receiver (DCSR); German version EN 50320:2000

BS EN 50320:2001 数字音频广播系统.接收器DBA指令集规范

This standard describes a command set which should be used to control DAB receivers. The coding of these commands is also described. This command set is intended to be used on different physical bus systems. The coding should be mapped transparently on different physical interfaces. Selection conflict management, dynamic bandwidth problems and the device addressing are not within the scope of this document.

Digital audio broadcasting system - Specification of the DAB command set for receivers (DCSR)

ARINC 628P1-3 ITEM 3.0-2001 可交换性标准新音频扬声器系统

Interchangeability Standards New Generation Audio Reproducer Unit (ARU)

Interchangeability Standards New Generation Audio Reproducer Unit (ARU)

ARINC 628P1-3 ITEM 4.0-2001 可交换性标准音频声源

Interchangeability Standards - Video Sources

Interchangeability Standards - Video Sources

ARINC 628P1-3 ITEM 6.0-2001 可交换性标准预先录制木板音乐扬声器

Interchangeability Standards - Pre-Recorded Announcement and Boarding Music Reproducer (PRAM)

Interchangeability Standards - Pre-Recorded Announcement and Boarding Music Reproducer (PRAM)

IEC 61909:2000 音频记录 微盘系统

This International Standard applies to the MiniDisc (MD). It defines the mechanical and electrical characteristics necessary to ensure the interchangeability of both premastered optical discs and recordable magneto-optical discs of 64 mm diameter for the compressed digital audio recording system.

Audio recording - Minidisc system

DIN EN 50332-1:2000 音响系统设备:与便携音响设备相关的头戴式耳机和耳机.最大声压水平测量方法和限制条件.第1部分:“一包设备”的一般方法

Sound system equipment: Headphones and earphones associated with portable audio equipment - Maximum sound pressure level measurement methodology and limit considerations - Part 1: General method for "one package equipment"; German version EN 50332-1:2000

NF C97-357-1:2000 音响系统设备.与便携式音响设备相关的耳机和头戴式耳机.最大声压级测量方法和限制考虑.第1部分:"单一包装设备"的一般方法

Sound system equipment - Headphones and earphones associated with portable audio equipment - Maximum sound pressure level measurement methodology and limit considerations - Part 1 : general method for "one package equipment".

IEC 60268-3:2000 声系统设备 第3部分:放大器

This part of IEC 60268 applies to analogue amplifiers, and the analogue parts of analogue/digital amplifiers, which form part of a sound system for professional or household applications. It specifies the characteristics which should be included in specifications of amplifiers and the corresponding methods of measurement. NOTE The methods of measurement for digital amplifiers and similar equipment are given in IEC 61606. [6] In general, the specified methods of measurement are those which are seen to be most directly related to the characteristics. This does not exclude the use of other methods which give equivalent results. In general, the methods are based on the simplest measuring equipment which can provide useful results. This does not exclude the use of more complex equipment which can give higher accuracy and/or allow automatic measurement and recording of results. Rated conditions and standard measuring conditions are specified in order to allow measurements to be reliably repeated. note: 1) Numbers in square brackets refer to the bibliography.

Sound system equipment - Part 3: Amplifiers

BS EN ISO 389-1:2000 声学.音响设备校正基准零点.纯音和超听觉耳机用基准等效阈值声压级

This part of ISO 389 specifies a standard reference zero for the scale of hearing threshold level applicable to pure-tone air conduction audiometers, in order to promote agreement and uniformity in the expression of hearing threshold level measurements throughout the world. It states the information in a form suitable for direct application to the calibration of audiometers, that is, in terms of the response of two different standard models of earphone measured on a coupler complying with IEC 60303 and In terms of other supra-aural earphones of models specified in 4.3 measured on an artificial ear complying with IEC 60318. It is based on an assessment of the information available from the various standardizing laboratories responsible for audiometric standards and from scientific publications. Some notes on the derivation and application of the recommended reference levels are given in annex A.

Acoustics - Reference zero for the calibration of audiometric equipment - Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones

IEC 61937:2000 数字音频 用于IEC 60958的非线性PCM编码音频位流的接口

Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958

SJ/T 11217-2000 家庭影院用环绕声放大器通用规范

本规范规定了家庭影院用环绕声放大器的要求、试验方法、质量评定程序及标志、包装、运输和贮存。 本规范适用于家庭影院用环绕声放大器，也适用于家庭影院用多通道声频功率放大器。

General specification of surround audio amplifier for home theater

SJ/T 11218-2000 家庭影院用组合扬声器系统通用规范

本规范规定了家庭影院用组合扬声器系统定义、技术要求、试验方法、质量评定程序、标志、包装、运输和贮存。 本规范适用于家庭影院用组合扬声器系统。

General specification of compositive loudspeaker system for home theater

NAVY MIL-DTL-18239 E-2000 H-87B/U型耳机

This specification covers one type of moving coil, dynamic type earphone designated as H-87B/U. This earphone transforms electrical energy into acoustical energy and may be acquired normally as component parts of a complete headset assembly

EARPHONE H-87B/U

IEC 60958-4:1999 数字音频接口 第4部分:专业类用途

Digital audio interface - Part 4: Professional applications

IEC 60958-3:1999 数字音频接口.第3部分:消费者用

Digital audio interface - Part 3: Consumer applications

IEC 60958-1:1999 数字音频接口 第1部分:总则

Digital audio interface - Part 1: General