M80 邮政综合 标准查询与下载

YD/T 711.6-1997 给据邮件条码签.国际挂号函件部分

Bar code label for record mail.International registered correspondence

YD/T 556-1997 国际包裹五联单

Bill in five parts for international postal parcels

YD/T 892-1997 邮政特快专递详情单

EMS Detail Sheet

YD/T 854-1996 邮政特快专递业务徽标

Express postal service logo

YD/T 845-1996 邮件处理中心噪声测量方法与噪声限制值

Noise measurement method and noise limit value of mail processing center

YD/T 844-1996 信函设备噪声测量方法

Noise measurement method for letter equipment

YD/T 771-1996 邮政用条码

postal barcode

YD/T 765-1995 邮件处理中心颜色使用导则

Guidelines for Color Usage in Mail Processing Centers

YD/T 749-1995 常用邮政设备图形符号

Commonly used postal equipment graphic symbols

YD/T 711.4-1994 给据邮件条码签 汇款通知部分

Sign the remittance notification part according to the email barcode

YD/T 711.3-1994 给据邮件条码签 纸质品包裹部分

Sign the parcel part of the paper product according to the barcode of the mail

YD/T 711.2-1994 给据邮件条码签 邮政快件部分

Sign the postal express part according to the barcode of the mail

YD/T 711.1-1994 给据邮件条码签 挂号函件部分

Sign the registered mail part according to the mail barcode

YD/T 711.5-1994 给据邮件条码签 包裹部分

Sign the package part according to the mail barcode

YD/T 725-1994 邮政业务术语 报刊发行部分

Postal Service Terminology Newspaper Publishing Section

YD/T 705-1993 邮政标志色及其测试方法

Color of postal signs and its test method

ASTM D5626-94(2006) 美国邮政局光学测量用于小电话网的标准试验方法

These test methods are to be used to determine the suitability of mailpieces for processing on automation equipment such as optical character readers and bar code readers and sorters. These test methods can be used to test finished mailpieces bearing address information or POSTNET bar codes, or both, as well as materials to be used in mailpiece construction. The test methods to be described will measure parameters relevant to machine readability such as the reflectance of the mailpiece background and printed areas. Specifically these parameters will be measured to determine acceptability in accordance with postal requirements for mailpieces submitted for automation discounts in accordance with the Domestic Mail Manual (DMM).1.1 These test methods deal with the measurement of optical properties important to automatic equipment used by the United States Postal Service, such as optical character recognition (OCR) readers and barcode readers. These test methods can be used to examine finished mailpieces bearing address information, as well as the unconverted materials intended to be subsequently used in mailpiece construction. These test methods are limited to the use of a single instrument, the U.S. Postal Service Envelope Reflectance Meter Model 2 (ERM-2), designed for use with mailpieces and materials intended for mailpiece construction such as paper and paper-like synthetics and inks.1.2 These test methods cover examination of small areas, measuring 0.152 by 0.254 mm (0.006 by 0.010 in.). This enables measurement of the reflectance characteristics of regions as small as the inked portion of a single printed character or a single bar in a barcode pattern.1.3 These test methods deal with the measurement of four different optical properties important to automatic mail handling, as follows:1.3.1 Background Reflectance (see )These test methods cover the determination of the relative reflectance factor of small areas of a specimen that do not contain printing or apparent show-through of printing, and so are representative of the base material.1.3.2 Print Reflectance Difference and Print Contrast Ratio(see )These test methods characterize the difference in reflectance between the envelope material and the characters printed upon the envelope with ink.1.3.3 Print Show Through (see )These test methods characterize the difference in reflectance between the envelope material backed with an unprinted insert and the envelope material examined in a region where it covers a printed character on the insert or a character printed on the back side of the envelope material itself.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for U.S. Postal Service Optical Measurements for Small Areas

ASTM D5626-94 美国邮政局光学测量用于小电话网的标准试验方法

1.1 These test methods deal with the measurement of optical properties important to automatic equipment used by the United States Postal Service, such as optical character recognition (OCR) readers and barcode readers. These test methods can be used to examine finished mailpieces bearing address information, as well as the unconverted materials intended to be subsequently used in mailpiece construction. These test methods are limited to the use of a single instrument, the U.S. Postal Service Envelope Reflectance Meter Model 2 (ERM-2), designed for use with mailpieces and materials intended for mailpiece construction such as paper and paper-like synthetics and inks. 1.2 These test methods cover examination of small areas, measuring 0.152 by 0.254 mm (0.006 by 0.010 in.). This enables measurement of the reflectance characteristics of regions as small as the inked portion of a single printed character or a single bar in a barcode pattern. 1.3 These test methods deal with the measurement of four different optical properties important to automatic mail handling, as follows: 1.3.1 Background Reflectance (see 11.1)8212;These test methods cover the determination of the relative reflectance factor of small areas of a specimen that do not contain printing or apparent show-through of printing, and so are representative of the base material. 1.3.2 Print Reflectance Difference and Print Contrast Ratio (see 11.2)8212;These test methods characterize the difference in reflectance between the envelope material and the characters printed upon the envelope with ink. 1.3.3 Print Show Through (see 11.3)8212;These test methods characterize the difference in reflectance between the envelope material backed with an unprinted insert and the envelope material examined in a region where it covers a printed character on the insert or a character printed on the back side of the envelope material itself. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for U.S. Postal Service Optical Measurements for Small Areas

YD 606-1993 邮政业务术语 函件部分

postal terminology letter part

YD 605-1993 邮政业务术语 邮政包裹部分

postal business term postal parcel part