N17 自动控制与遥控装置 标准查询与下载

KS B ISO 15926-1:2006 工业自动化系统和集成.包括油气生产设施的加工设备使用寿命数据的集成.第1部分:概要和基本原则

이 규격은 공정 플랜트의 엔지니어링, 건설, 운영과 연관된 정보의 표현을 규정한다.

Industrial automation systems and integration－Integration of life-cycle data for process plants including oil and gas production facilities－Part 1：Overview and fundamental principles

KS B ISO 16100-2:2006 工业自动化系统与集成.制造软件互操作性能力建规.第2部分:建规方法论

이 규격은 제조 소프트웨어 성능의 구성 프로파일에 대한 방법론을 설명하고, 제조 영역에서

Industrial automation systems and integration-Manufacturing software capability profiling for interoperability-Part 2:Profiling methodology

KS B ISO 10303-232:2006 工业自动化系统和集成.产品数据表示和交换.第232部分:应用协议.技术数据包装核心信息和交换

이 규격은 제품 데이터 관리 시스템 사이에서 교환되는 기술 데이터 패키지(TDP:Techn

Industrial automation systems and integration-Product data representation and exchange-Part 232:Application protocol:Technical data packaging core information and exchange

KS B ISO 15926-2:2006 工业自动化系统和集成.包括油气生产设施的加工设备使用寿命数据的集成.第2部分:数据模型

이 규격은 공정 플랜트의 기술 정보를 컴퓨터로 표현하기 위한 개념적 데이터 모델을 명시

Industrial automation systems and integration－Integration of life-cycle data for process plants including oil and gas production facilities－Part 2：Data model

NRS 037-1-2006 远程控制协议．第1部分：单机式远程终端装置的远程控制协议

Covers the protocols for communication between the master station and slave devices and specifies the DNP 3.0, IEC 60870-5-101 and IEC 60870-5-104 protocols.

Telecontrol protocol Part 1: Telecontrol protocol for stand-alone remote terminal units

DL/T 655-2006 火力发电厂 锅炉炉膛安全监控系统验收测试规程

本标准规定了火力发电厂锅炉炉膛安全监控系统验收测试的内容、方法，以及应达到的标准。 本标准适用于装设单机容量为125MW～600MW等级机组的火力发电厂新建工程各个阶段和技术改造工程的锅炉炉膛安全监控系统验收测试。 其他容量机组的验收测试以及机组检修后的验收测试也可参照本标准执行。

Code for acceptance test of furnace safeguard supervisory system in fossil fuel power plant

DL/T 659-2006 火力发电厂 分散控制系统验收测试规程

本标准规定了火力发电厂分散控制系统（distributed control system，简称 DCS）验收测试的内容、方法以及应达到的要求。 本标准适用于单机容量为125MW～600MW等级机组的火力发电厂的新建工程各个阶段DCS的验收测试，适用于技术改造工程的DCS或由可编程序控制器（PLC）组成的DCS，以及用于DEH（MEH）的、以微处理器为基础的其他控制系统的验收测试。 其他容量机组DCS的验收测试以及机组DCS重大检修后的验收测试也可参照执行。

Code for acceptance test of distributed control system in fossil fuel power plant

DL/T 657-2006 火力发电厂模拟量控制系统验收测试规程

本标准规定了火力发电厂模拟量控制系统验收测试的内容、方法，以及应达到的品质指标。 本标准适用于装设单机容量为125MW～600MW等级机组的火力发电厂新建工程各个阶段和技术改造工程的模拟量控制系统验收测试。 其他容量机组的验收测试以及机组检修后的验收测试也可参照本标准执行。

Code for acceptance test of modulating control system in fossil fuel power plant

DL/T 656-2006 火力发电厂汽轮机控制系统验收测试规程

本标准规定了火力发电厂汽轮机电液控制系统验收测试的内容、方法以及应达到的技术要求。 本标准适用于单机容量为125MW～600MW等级机组火力发电厂新建工程各个阶段或技术改造工程的汽轮机电液控制系统的验收测试。 其他容量机组的验收测试以及机组重大检修后的验收测试也可参照执行;汽动给水泵汽轮机电液控制系统的验收测试可参照本规程的有关部分执行。

Code for acceptance test of turbine control system in fossil fuel power plant

DL/T 658-2006 火力发电厂开关量控制系统验收测试规程

本标准规定了火力发电厂开关量控制系统验收测试的内容、方法以及应达到的要求。 本标准适用于装设单机容量为125MW～1000MW等级机组的火力发电厂新建工程各个阶段的开关量控制系统验收测试和技术改造工程的开关量控制系统验收测试。 其他容量机组的验收测试以及机组重大检修后的测试也可参照执行。

Code for acceptance test of on-off control system in fossil fuel power plant

IEC 61804-2:2006 过程控制用功能块(FB).第2部分:FB概念规范

This part of IEC 61804 is applicable to Function Blocks (FB) for process control. This standard specifies FB by using the result of harmonization work as regards several elements: c) the device model which defines the components of an IEC 61804-2 conformant device; d) conceptual specifications of FBs for measurement, actuation and processing. This includes general rules for the essential features to support control, whilst avoiding details which stop innovation as well as specialization for different industrial sectors. This standard defines a subset of the requirements of IEC 61804-1 (hereafter referred to as Part 1) only, while Part 1 describes requirements for a distributed system. The conformance statement in Annex B, which covers the conformance declaration, is related to this standard only. Requirements of Part 1 are not part of these conformance declarations. The standardization work for FB was carried out by harmonizing the description of concepts of existing technologies. It results in an abstract level that allowed the definition of the common features in a unique way. This abstract vision is called here the conceptual FB specification and mapped to specific communication systems and their accompanying definitions by the industrial groups. This standard is also based on the abstract definitions of IEC 61499-1. NOTE This standard can be mapped to ISO 15745-1. There are solutions on the market today, which fulfil the requirements of this standard and show how the conceptual specification is implemented in a given technology. New technologies will need to find equivalent solutions (see Figure 4).

Function blocks (FB) for process control - Part 2: Specification of FB concept

JIS B 6316-1:2006 工业自动化系统和集成.物理设备控制.计算机数控器用数据模型.第1部分:概论和基本原理

この規格は，CNC装置のためのデータモデルに関するJIS B 6316 (ISO 14649)規格群の概要，その適用方法及び製品データの概念に基づく基本原理について規定する。

Industrial automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 1: Overview and fundamental principles

ISO 10303-224:2006 工业自动化系统和集成.产品数据表示和交换.第224部分:应用协议:用机械加工特性的加工计划用机械产品定义

This part of ISO 10303 specifies the information requirements for the representation and exchange of information needed to define the product data which is necessary in the manufacturing of a single piece or assembly of mechanical parts. It also specifies the integrated resources necessary to satisfy these requirements. The product data is based on existing part designs whose shapes are represented by machining features. This part of ISO 10303 supports digital representation for computer integrated manufacturing. NOTE 1 The application activity model in Annex F provides a graphical representation of the process and information flows which form the basis for the definition of the scope of this part of ISO 10303. The following are within the scope of this part of ISO 10303: — the manufacture of a single piece mechanical part, and assemblies of single piece parts for manufacturing purposes; — parts that are to be manufactured by either milling or turning processes; — machining features for defining shapes necessary for manufacturing; NOTE 2 The machining feature set is defined in this part of ISO 10303. — explicit representation of the 3D shape of machining features through bounded geometry representations; — implicit representation of machining features through selection of standard parameters; — machining feature definition elements necessary for creating machining form features; — customer order administrative data to track receipt of an order for a part to the shop floor, but not including tracking of the order on the shop floor; — approval data to authorize the manufacture of a part; — requisition administrative data to identify requirements and track the status of materials and equipment needed to manufacture a part; — work order data to track and identify the status of a part;

Industrial automation systems and integration - Product data representation and exchange - Part 224: Application protocol: Mechanical product definition for process planning using machining features

DIN-Fachbericht IEC/TR 62390:2006 通用自动装置.轮廓指南

Common automation device - Profile guideline

ISO 10303-522:2006 工业自动化系统和集成.产品数据表示和交换.第522部分:应用解释结构:机械特性

This part of ISO 10303 specifies the interpretation of the integrated resources to satisfy requirements for machining feature use across a range of application protocols. The product data is based on existing part designs that have their shapes represented by machining features. This part of ISO 10303 supports digital representation for computer integrated manufacturing. The following are within the scope of this part of ISO 10303: — features that are to be manufactured by either milling or turning processes; — machining features for defining shapes necessary for manufacturing; NOTE The machining feature set is defined in ISO 10303-224. — machining feature definition elements necessary for creating machining features; — shape representations necessary for creating machining features; — features that can be replicated in patterns; — implicit representation of machining features through selection of standard parameters. The following are outside the scope of this part of ISO 10303: — feature order or sequence; — design features of a part.

Industrial automation systems and integration Product data representation and exchange Part 522: Application interpreted construct: Machining features (Second Edition)

NRS 037-3-2005 远程控制协议．第3部分：控制中心通信协议

Covers intercontrol centre communications protocol based on TASE.2, and provides recommendations on the minimum implementation of TASE.2.

Telecontrol protocol Part 3: Intercontrol centre communications protocol

ASTM D6672-06 格式化驱动数值控制的切布机的切割数据的标准实施规程

This practice provides a common format that allows a computer design system to generate data that an output device can accurately reproduce independent of the hardware manufacturer.1.1 This practice specifies a data format for numerically-controlled cutting machines for fabric.1.2 This standard uses a subset of the defined instruction set defined in ANSI/EIA-274-D in addition to the codes defined by this practice.1.3 This practice does not support curve interpolation or definitions. All curves are represented by discrete vectors (stroked) and are dependent on the resolution of the CAD software.1.4 This practice requires that all coordinates are absolute, not relative.1.5 This practice only supports positive coordinates that are measured from a single X-Y origin point with coordinates (0,0). The origin point is specified as the lower left corner of the cut file.1.6 This practice intends to transfer a static image with no provision for editing.1.7 This practice imposes no limits on the width or length of the cut data. Physical limitations imposed by the hardware and their effects on the output are the responsibility of the hardware manufacturer.1.8 This practice does not support bite commands or any methods that insert multiple origin points or floating coordinate systems.1.9 This practice does not support notch tools. 1.10 This practice does not support pattern matching.1.11 This practice limits the cut file to contain a single block of data demarked by a compatible header and terminator. Multiple blocks of data in a single file are not allowed.1.12 Any commands found in the cut file that are not defined by this standard shall be ignored.1.13 The intended application of this practice is limited to the class of output devices found in the sewn product industries that produce apparel, textiles, upholstery, and others that use soft or semi-rigid materials.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Formatting Cutting Data to Drive Numerically Controlled Fabric Cutting Machines

ISO 10303-240:2005 工业自动化系统和集成.产品数据表示和交换.第240部分:应用协议:机械加工产品的加工计划

This part of ISO 10303 specifies the use of the integrated resources necessary for the scope and information requirements for the exchange, sharing and long term data retention of computer-interpretable process plan information for both numerical control (NC) and manually operated applications, and associated product definition data. NOTE 1 The application activity model in Annex F provides a graphical representation of the processes and information flows which are the basis for the definition of the scope of this part of ISO 10303.

Industrial automation systems and integration - Product data representation and exchange - Part 240: Application protocol: Process plans for machined products

ISO/TS 10303-1101:2005 工业自动化系统和集成.产品数据表示和交换.第1101部分:应用模型:产品性能特征的定义

ISO/TS 10303-1101:2005 specifies the application module for Product property feature definition. The following are within the scope of ISO/TS 10303-1101:2005: specification of the use of a characterized object as a feature definition of a product; specification of the use of a shape aspect as an instanced feature of a product.

Industrial automation systems and integration - Product data representation and exchange - Part 1101: Application module: Product property feature definition

ISO/TS 10303-25:2005 工业自动化系统和集成.产品数据表示和交换.第25部分:执行办法:从EXPRESS到XML汇编

ISO/TS 10303-25:2005 specifies a mapping from the EXPRESS data specification language into the Object Management Group's (OMG) Unified Modeling Language (UML), for the purpose of generating files conforming to the OMG XML Meta-data Interchange standard.

Industrial automation systems and integration - Product data representation and exchange - Part 25: Implementation methods: EXPRESS to XMI binding