N17 自动控制与遥控装置 标准查询与下载

ISO 10303-239:2005 工业自动化系统和集成.产品数据表示和交换.第239部分:应用协议:产品生命周期保证和应用模式

Industrial automation systems and integration - Product data representation and exchange - Part 239: Application protocol: Product life cycle support and application modules

ISO 20242-1:2005 工业自动化系统和集成.用于试验应用的操作界面.第1部分:概述

This part of ISO 20242 provides an overview of the particularities of this International Standard and its use in the computer aided testing environment.

Industrial automation systems and integration - Service interface for testing applications - Part 1: Overview

ISO 10303-54:2005 工业自动化系统和集成.产品数据表示和交换.第54部分:集成通用资源:分类和配置原理

Industrial automation systems and integration - Product data representation and exchange - Part 54: Integrated generic resource: Classification and set theory

ISO 10303-56:2005 工业自动化系统和集成.产品数据表示和交换.第56部分:集成通用资源:状态

Industrial automation systems and integration - Product data representation and exchange - Part 56: Integrated generic resource: State

ISO 15531-42:2005 工业自动化系统和集成.工业生产管理数据.第42部分:时间模式

This part of ISO 15531 specifies a generic framework for the description of topological properties applicable to a wide range of one dimension domains. However, and given the needs of the other parts of ISO 15531, the developments made in this part are focused on the time domain, thus providing a universal, self consistent model, independent of any event that may occur, or has already occurred, at a given point in time. The time model specified in this part enables any software application to provide an accurate time reference to any related event, or sequence of events, whether in the past, in the present, or in the future. This time model may be used by any application that needs to reference events, actions, or sequences of action linked to time or intervals of time simultaneously. According to this, the scope of this part of ISO 15531 includes the following: — the description of the topological properties of an one dimension domain; — the description of the time model and of the related definitions; — the EXPRESS definitions of entities, attributes and schemas as prescribed in ISO 10303-11 (the reference manual of the EXPRESS language); — the EXPRESS-G diagrams of the model as prescribed in ISO 10303-11. The following are out of the scope of this part of ISO 15531: — the description of any kind of measure theory or measure method — elements and domains of more than one dimension — the modelling of any event as described in ISO 10303-41

Industrial automation systems and integration - Industrial manufacturing management data - Part 42: Time Model

ISO 14649-121:2005 工业自动化系统和集成.机械装置控制.计算机数控器用数据模型.第121部分:车床用工具

This part of ISO 14649 specifies the data elements describing cutting tool data for turning machine tools and machining centres. They work together with ISO 14649-12, the process data for turning machine tools and machining centres. These data elements can be used as criteria to select one of several operations; they do not describe a complete information of a particular tool. Thus, leaving out optional attributes gives the controller more freedom to select from a larger set of tools. Note 1 The NC is assumed to have access to complete description of specific tools in a database. The turning_machine_tool_schema defined in this part of ISO 14649 serves as a basic tool schema including the information required by the CNC to select a tool from the machine tool's tool turret. Note 2 In ISO 6983, the tool is defined by its identifier (e.g. T8). No further information concerning the tool type or geometry is given. This information is part of the tool set-up sheet, which is supplied with the NC-program to the machine. The tool set-up sheet gives the relationship between the tool location (e.g. the slot 8 of the tool magazine) and the type of tool (e.g. "drill 4 mm"). This part of ISO 14649 includes the information which is contained in the tool set-up sheet: · tool identifier; · tool type; · tool geometry; · application dependent expected tool life. The turning_machine_tool_schema does not include information which is part of the tool database. The tool database is related to the machine tool and the tool itself but independent of the NC program. The following data types are out of scope of this part of ISO 14649: · normative tool life; · tool location in the tool changer; · adaptive items also know as tool holders or tool clamping devices; · tools for other technologies such as milling, grinding, EDM. Note 3 It is important to understand that all length measure types used in this part of ISO 14649 are not toleranced length measure types because they are used to describe the tools required for the manufacturing of a workpiece, not the actual dimensions of the tools available at the machine. A real tool must be selected by the tool management based on the actual tool dimensions and the tolerances of features.

Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers - Part 121: Tools for turning machines

ISO/TS 10303-1307:2005 工业自动化系统和集成.产品数据表示和交换.第1307部分:应用模型:AP239工作定义

ISO/TS 10303-1307:2005 specifies the application module for AP239 work definition. The following are within the scope of ISO/TS 10303-1307:2005: the plans and schedules for work to be performed; the association of task specifications with plans and schedules; the association of meta data with plans and schedules; the association of resources and outputs with plans and schedules; the location and quantification of planned and actual resources within a supply chain.

Industrial automation systems and integration - Product data representation and exchange - Part 1307: Application module: AP239 work definition

ISO/TS 10303-1287:2005 工业自动化系统和集成.产品数据表示和交换.第1287部分:应用模型:AP239活动性记录

ISO/TS 10303-1287:2005 specifies the application module AP239 activity recording. The following are within the scope of this part of ISO 10303: recording the usage of a product; recording the maintenance activities on a product; recording the use of resources during usage of a product; recording the use of resources during the maintenance of a product; recording observations against a product or its support solution; relating the record of an activity to the work order, work request and work definition from which it arose.

Industrial automation systems and integration - Product data representation and exchange - Part 1287: Application module: AP239 activity recording

ISO/TS 10303-1292:2005 工业自动化系统和集成.产品数据表示和交换.第1292部分:应用模型:AP239产品定义信息

ISO/TS 10303-1292:2005 specifies the application module for AP239 product definition information. The following are within the scope of ISO/TS 10303-1292:2005: the representation of parts, their versions, their definitions, and their management information, such as dates, that are assigned to them; the representation of assignments of an identifier and alias identifications to parts and their versions; the representation of characterization views of a version of a part; the representation of the data that identify a product and the categories of products it belongs to; the representation of relationships between versions of products; the representation of context-dependent relationships between definitions of product versions; the representation of the composition of an assembly as parent-child relationships between views on products; the representation of the shape of an assembly as the composition of the shape representation of its components; the association of valued properties to a part or to an assembly; the association of documentation to a part or to an assembly; the identification of positions within an assembly of parts to which component parts may be attached; the identification of parts that are attached to identified positions within an assembly; the identification of a breakdown of a product or product_as_individual; the identification of the elements that comprise a breakdown; the identification of parent-child relationships between breakdown elements; the identification of relationships between elements in different breakdowns; the representation of the replacement of a product by another; the representation and classification of documents and document information that may apply to part definition information; the representation of properties of objects, their values and types, and classifications; the representation of information that records the identification of an existing or potential future artifact - an actual product whose properties can only be known by observation or by derivation from observations; the representation of interfaces between products; the representation of the life cycle phase of existing interfaces between actual products (as realized), and includes planned interfaces between planned products; the representation of relationships between requirements and items to which they are assigned, and between requirements and the items which are their source; the representation of the information that identify a requirement and versions of requirements; the representation of characterization views of a requirement version; the representation of relationships between requirements which are expressed as relationships between requirement view definitions; the representation of a type of state; the representation of an observed state; the identification of the configuration of a product for a given product concept; the specification of effectivity constraints applied to configuration of a product.

Industrial automation systems and integration - Product data representation and exchange - Part 1292: Application module: AP239 product definition information

ISO/TS 10303-1306:2005 工业自动化系统和集成.产品数据表示和交换.第1306部分:应用模型:AP239任务规范方法

ISO/TS 10303-1306:2005 specifies the application module for AP239 task specification resourced. The following are within the scope of ISO/TS 10303-1306:2005: the identification of resources required by tasks; the identification of products to which tasks are assigned; the association of properties with task specifications; the association of dates, times, people, approvals and other management data with task specifications; the specification of conditions under which a task falls due; the association of a justification and a probability with a task assignment to a product, or a resource assignment to a task; the association of a location with a task or resource.

Industrial automation systems and integration - Product data representation and exchange - Part 1306: Application module: AP239 task specification resourced

ISO/TS 10303-1293:2005 工业自动化系统和集成.产品数据表示和交换.第1293部分:应用模型:AP239部件定义信息

ISO/TS 10303-1293:2005 specifies the application module for AP239 part definition information, in particular: representation of the data that identify parts and their versions; representation of characterization views of a version of a part; representation of parts, their versions, their definitions, and their management information, such as dates, that are assigned to them; representation of alias identifications assigned to product data; representation of the data that identify a product and the categories of products it belongs to; representation of the data that designate a version of a product; representation of characterization views of a product version; representation of relationships between versions of products; representation of assignments of an identifier to product data; representation and classification of documents and document information that may apply to part definition information; representation of properties of objects, their values and types, and classifications; representation of information that records the identification of an existing or potential future artifact - an actual product whose properties can only be known by observation or by derivation from observations; representation of interfaces between products; representation of the life cycle phase of existing interfaces between actual products (as realized), and includes planned interfaces between planned products; representation of relationships between requirements and items to which they are assigned, and between requirements and the items which are their source; representation of the information that identify a requirement and versions of requirements; representation of characterization views of a requirement version; representation of relationships between requirements which are expressed as relationships between requirement view definitions; representation of a type of state; representation of state observed.

Industrial automation systems and integration - Product data representation and exchange - Part 1293: Application module: AP239 part definition information

ISO 15704:2000/Amd 1:2005 工业自动化系统.企业参考体系结构和方法学的要求.修改件1:涉及用户的补充考虑

This is Amendment 1 to ISO 15704-2000 ( Industrial automation systems — Requirements for enterprise-reference architectures and methodologies —)

Industrial automation systems - Requirements for enterprise-reference architectures and methodologies - Amendment 1: Additional views for user concerns

ISO/TS 10303-439:2005 工业自动化系统和集成.产品数据表示和交换.第439部分:应用模型:AP239产品生命周期保证

ISO/TS 10303-439:2005 specifies the application module for AP239 product life cycle support. The following are within the scope of ISO/TS 10303-439:2005: information for defining a complex product and its support solution; information required to maintain a complex product; information required for through life configuration change management of a product and its support solution; the representation of product assemblies including: the identification and representation of parts, their versions, definitions, and documentation and management information, such as dates and approvals assigned to parts; the representation of multiple product structure views and product breakdowns; the representation of the shape of an assembly as the composition of the shape representation of its components; the identification of positions within an assembly of parts to which component parts may be attached; the association of valued properties to a part or to an assembly; the representation of interfaces between products; the classification of parts, documents and assemblies. the representation of a product through life including: the representation of product requirements and their fulfilment; the representation of existing or potential future products; the identification of the configuration of a product for a given role; the specification of effectivity constraints applied to configuration of a product; the representation of predicted and observed states of products. the specification and planning of activities for a product including: the specification of tasks to be performed on a product; the representation of conditions for performing the tasks, including the resources required and the location of the resources and product; the representation of the type of person and skills required for performing a task; the representation of planning and scheduling of the tasks and the management and authorization of the subsequent work. the representation of the activity history of a product including: the recording of the usage of a product and the resource usage; the recording of the activities performed on a product and the resource usage. the representation of the product history including: a historical record of the states of a product; a historical record of the configuration status of the product; the location of product data; the observation of product data.

Industrial automation systems and integration - Product data representation and exchange - Part 439: Application module: AP239 product life cycle support

ISO/TS 10303-1304:2005 工业自动化系统和集成.产品数据表示和交换.第1304部分:应用模型:AP239产品状态记录

ISO/TS 10303-1304:2005 specifies the application module for AP239 product status recording. The following are within the scope of ISO/TS 10303-1304:2005: assignment of an observed state to an identified product or product group; assignment of an observed state to a connection, interface or other relationship between two products; relating an activity to the assignment of an observed state; assignment of a justification for an observed state; assignment of a location to a product or product group; assignment of an activity to the assessment of an observed state; addition of an product or product group to the context for an observation; association of a translation in a particular language of an observation and observation consequence.

Industrial automation systems and integration - Product data representation and exchange - Part 1304: Application module: AP239 product status recording

IEC 62264-2:2005 企业控制系统一体化.第2部分:对象模型属性

in conjunction with IEC 62264-1, specifies generic interface content between manufacturing control functions and other enterprise functions. The interfaces considered are the interfaces between Levels 3 and 4 of the hierarchical model defined in IEC 6226

Enterprise-control system integration - Part 2: Object model attributes

KS B ISO 10303-27:2005 工业自动化系统和集成.产品数据表示和交换.第27部分:执行方法:与因特网/内部网扩展部分的标准数据存取界面的JAVA程序设计语言

이 규격은 KS B ISO 10303-11에서 규정한 EXPRESS 언어로 모델링된 응용

Industrial automation systems and integration-Product data representation and exchange-Part 27:Implementation methods:JavaTM programming language binding to the standard data access interface with Internet/Intranet extensions

KS B ISO 10303-522:2005 工业自动化系统和集成.产品数据表示和交换.第522部分:应用解释结构:机械特性

이 규격은 다양한 응용 프로토콜에서의 가공 특징 형상의 사용을 위한 요구 조건을 만족시키기

Industrial automation systems and integration－Product data representation and exchange－Part 522：Application interpreted construct：Machining features

NF C46-500-2:2005 工业过程控制系统.第2部分:气动输出智能阀门定位器性能的评估方法

Industrial-process control systems - Part 2 : methods of evaluating the performance of intelligent valve positioners with pneumatic outputs.

KS B ISO 15745-2:2004 工业自动化系统和集成.开放系统应用集成框架.第2部分:基于ISO 11898的控制系统所使用的参考性描述

이 규격은 통신 네트워크 단면과 ISO 11898 기반의 제어 시스템에 한정된 장치 프로파

Industrial automation systems and integration-Open systems application integration framework-Part 2: Reference description for ISO 11898-based control systems

KS B ISO 18876-1:2004 工业自动化系统和集成.交换、评估和共享用工业数据的集成.第1部分:基本构造

이 규격은 교환, 접근, 공유를 위한 산업 데이터의 통합에 대한 아키텍처, 방법론 및 기타

Industrial automation systems and integration-Integration of industrial data for exchange, access and sharing-Part 1:Architecture overview and description